How to Update the Firmware of Deco

When You Set Up
Updated 06-27-2023 10:22:26 AM 555353
This Article Applies to: 

An up-to-date firmware provides better and more stable network performance, so we highly recommend you always update Deco to the latest firmware version.

Here are three ways to update the firmware.

Method 1: Update the firmware via the Deco app, which applies to all of the Deco models.

Here we take Deco M5 as an example.

Log into the Deco app and tap More>System>Update Deco. Here you can see if your current firmware is up to date. If not, please follow the instruction on this page to update the firmware to the latest one.

Tips:

If the firmware update fails, please reboot the main Deco, move the Satellite Deco closer to the main Deco, then try to update again.

Method 2: Update the firmware manually via the web UI, which applies to the Deco models that have the web management page.

Step 1: Go to the Download Center > click on your Deco’s model > select the hardware version of your Deco unit > click on Firmware, then you can download the latest firmware on your computer.

Step 2: Unzip the downloaded firmware and you will see a bin file.

Refer to the link to log into the web management page of your Deco. If you fail to log into the web page, please refer to the link to troubleshoot.

Step 3: On the web management page, click on Advanced > System > Firmware Upgrade, select your Deco’s model, then click on BROWSE to select the bin file, and then click on UPGRADE to update the firmware.

Note: Currently, some Deco models do not support the web management page, but don’t worry, they will support the web page via firmware updates in the future.

Method 3: Update the firmware via upgrade tool, which only applies to Deco M5 and Deco M9 Plus V2.

Here we take Deco M5 as an example.

Step 1 Please refer to the link below to download the upgrade utility on your computer.

Then extract the file and run the update tool.

https://www.tp-link.com/support/download/deco-m5/v1/#Utility

For the Deco M9 Plus V2, please refer to the link below.

https://www.tp-link.com/support/download/deco-m9-plus/v2/#Utility

Step 2 Log in to Deco M5 Update Assistant with your TP-Link ID and password that you

used to set up the Deco M5 in the Deco app.

Step 3 Ensure the computer is connected to the main Deco (either wired or wireless) and all the Deco units are online. Then click on the Scan button.

Step 4 After the Update Assistant found the Deco units, click on Next.

Step 5 Click on Choose File, select the firmware of the Deco M5 in this folder (the bin file).

Step 6 Click on Update.

Step 7 Wait for about 5 minutes till Deco completes the update and reboot. The LED light

will finally turn to solid green, indicating that the upgrade has been done

successfully.

Note:

a) If you have trouble updating the Deco M9 Plus v2 (password incorrect) with Utility, please refer to the FAQ:https://www.tp-link.com/support/faq/2930/

b) If the Deco M9 Plus v2 has a firmware of 1.4.0 or later, the new firmware could be updated through the Deco app or the web pagehttp://tplinkdeco.net

Related FAQs

Looking for More

Is this faq useful?

Your feedback helps improve this site.

Recommend Products

From United States?

Get products, events and services for your region.