How do I manually configure DNS address on Deco M5?

In certain network environment, users may need to configure particular DNS address for his/her network. This article is to guide users on how to manually configure DNS address on the Deco M5.

Part 1, Preparation

1, Have the Deco App installed on your mobile Phone.

2, Make sure the mobile phone is connected to Deco's Wi-Fi network.

3, Close the Deco App if it is already running in the background.

4, Re-launch the Deco App.

Please note: Only when you are connected to Deco's Wi-Fi network, can you change the WAN IP settings of the Deco; Re-launching the Deco App is to clear App buffer. These two steps are necessary.

Part 2, Change the DNS settings

1, Tap into Advanced->IPv4 in the Deco App.


2, Go to "Internet Connection Type"

3, Un-toggle "Obtain DNS Automatically"

 4, Type in your preferred DNS addresses and save the changes.

This Article Applies to:
Deco P7 , Deco M5
When You Set Up | Updated 01-26-2018 02:47:01 AM