Stáhnout pro RE650
>Jak zjisti hardwarovou verzi vašeho TP-Link zařízení?
- Product Overview
Setup Video
-
How to Set up TP-Link Range Extender RE650 via Web Browser
Learn how to install and set up the TP-Link WiFi Range Extender RE650 via a web browser. For more information on TP-Link WiFi Range Extenders, visit: https://bit.ly/2TDJ5WIZjistit více
-
How to Set Up TP Link Range Extender RE650 via WPS
-
How to Set Up TP Link Range Extender RE650 via Tether App
-
How to set up a TP-Link Range Extender(No music)
-
How to set up a TP-Link Range Extender
FAQ
- What should I do if my range extender does not extend the Wi-Fi coverage?
- How to configure Range Extender via Tether APP
- My devices are connected to the range extender but no network access
- How to Boost Your Wi-Fi Signal
- How to configure the range extender as an access point (new logo)?
- What's the solution if my TP-Link range extender can't connect to my router properly?
- How to confirm whether my range extender is successfully configured and in the best location?
- What should I do if the range extender cannot find my host network?
- Most frequently asked questions about TP-Link range extenders
- How to find or change the wireless settings of TP-Link Range Extender
- How to Join an OneMesh Network with a Range Extender Already Set Up?
- How to check whether my Range Extender is using the same SSID with my Router
- Different Application Scenarios to use the TP-Link dual band range extender
- How to set up Mac Filtering on router (blue UI) to control the devices connected to the Range Extender?
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）
Jak zjisti hardwarovou verzi vašeho TP-Link zařízení? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
| RE650(EU)_V2_210302 | |||
|---|---|---|---|
| Datum vydání: 2021-03-26 | Jazyk: Multi-language | Velikost souboru: 7.90 MB | |
|
|||
| RE650(EU)_V2_210224 | |||
|---|---|---|---|
| Datum vydání: 2021-03-25 | Jazyk: Multi-language | Velikost souboru: 7.90 MB | |
|
|||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
GPL Code
Emulátory
Verze firmwaru |
Working Mode |
Jazyk |
|
|---|---|---|---|
20200309(EU) |
- |
Multi-language |