How to Configure the Access Point Mode on the TL-MR3020 and TL-MR3040

Definition:The TL-MR3020/TL-MR3040 is connected to a wired network and transforms the wired Internet access into wireless so that wireless devices can share the Internet.

Application:

1. Office, hotel and places where only wired network is available.

2. LAN gaming party, small meeting and other situations where a temporary wireless network is needed.

Please refer to this FAQ to log into the web interface of TL-MR3020.

Please refer to this FAQ to log into the web interface of TL-MR3040.

Run Quick Setup

Step 1:

Go to Quick Setup-> Click Next

Step 2:

Select AP-> Click Next

Step 3:

Customize your wireless name (SSID) and password

Wireless Radio: Enable

SSID: (Rename Your Wireless Name)

Region:(Select Your Current Location)

Channel: Auto

Mode: 11bgn mixed

Channel Width: Auto

Security Options: WPA-PSK/WPA2-PSK

PSK Password: (Create a Private Password)

Click Next

Step 4:

Click: Reboot, and wait until it goes to 100%

Relocate the TL-MR3020/TL-MR3040

You may now connect the TL-MR3020/TL-MR3040 directly into your Wired Ethernet Network Connection as displayed on the picture below.

Congratulations! All your Wi-Fi enabled devices can connect to the customized wireless network.

Computer Setup Reversion

After the configuration, we need change the TCP/IP settings back on the computer.

Please refer to the last section of this FAQ for TL-MR3020.

Please refer to the last section of this FAQ for TL-MR3040.

If it doesn't work, please feel free to contact us(support@tp-link.com).

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

How to Configure the Access Point Mode on the TL-MR3020 and TL-MR3040

SubscriptionTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.

Follow Us