Download for Archer BE800 V1
IMPORTANT:
Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
- Product Overview
-
- Manual
-
Setup Video
-
How to Set Up TP-Link Archer Wi-Fi 7 Router (take Archer BE800 as Example)
This video uses Archer BE800 as an example to show how to configure TP-Link Wi-Fi 7 Router with internal antennas. The actual product may vary by model. For detailed information on ports, buttons, and LED indicators, please refer to the user manual for your specific model.
More
Fold
-
How to Resolve Double NAT using Starlink
-
How to Configure a TP-Link Router with Starlink
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
How to Find the Hardware Version on Your TP-Link Device
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
More
Fold
|
Archer BE800(US)_V1_1.4.1 Build 20260401
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2026-05-27
|
Language: Multi-language
|
File Size: 61.61 MB
|
This update introduces a lot of EasyMesh updates, bug fixes, and system optimizations.
New Features/Enhancements:
1. Newly upgrade the wireless driver to enhance system security and stability.
2. Newly support for EasyMesh to extend IoT networks.
3. Newly support for EasyMesh binding to specific front-end backhaul APs.
4. Newly support for client binding to specific AP nodes in EasyMesh.
5. Optimized the VPN performance.
Bug Fixes:
1. Fixed the bug that traffic statistics for specific clients were abnormal under certain circumstances.
|
|
Archer BE800(AU)_V1_1.3.2 Build 20251015
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2025-11-12
|
Language: Multi-language
|
File Size: 55.98 MB
|
This update introduces bug fixes and system optimizations.
New Features/Enhancements:
1. Enhanced system security and stability.
Bug Fixes:
1. Fixed the bug that weather location selection is not available.
2. Fixed the bug that failed to connect the OpenVPN of NordVPN.
3. Fixed the bug that OpenVPN server stop working in special cases.
|
|
Archer BE800(AU)_V1_1.2.4 Build 20250414
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2025-06-30
|
Language: Multi-language
|
File Size: 54.70 MB
|
This update mainly introduces bug fixes and optimized VPN compatibility.
New Features/Enhancements:
1.Improved VPN client function compatibility
Bug Fixes:
1.Fixed the issue where enabling IPTV in static dial-up mode caused the WAN port to disconnect
2.Fixed the issue where the default route was missing in the routing table after restarting with IPv6 in Static IP mode
3.Fixed the issue where whitelist mode did not take effect in special cases
4.Fixed the issue where MLO network clients could not be displayed in AP mode
5.Fixed the issue where NO-IP could not bind correctly after the router restarted
|
|
Archer BE800(AU)_V1_1.2.3 Build 20250314
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2025-04-10
|
Language: Multi-language
|
File Size: 54.70 MB
|
Note:
Fixed an issue where traffic usage data in the Tether App was missing after setting a 2.4GHz Wi-Fi schedule.
Fixed a bug where 6GHz might not be seeing due to 6GHz beacon exhibit abnormal behavior.
|
|
Archer BE800(US)_V1_1.2.3 Build 20250314
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2025-04-10
|
Language: Multi-language
|
File Size: 54.70 MB
|
Note:
Fixed an issue where traffic usage data in the Tether App was missing after setting a 2.4GHz Wi-Fi schedule.
Fixed a bug where 6GHz might not be seeing due to 6GHz beacon exhibit abnormal behavior.
|
|
Archer BE800(AU)_V1_1.2.1 Build 20250108
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2025-02-12
|
Language: Multi-language
|
File Size: 55.21 MB
|
This firmware introduces wireless driver update to enhance the system stability and compatibility, also a lot of new functions supported like DoH/DoT and EasyMesh in AP mode, so it's strongly recommended to upgrade to this version.
Please notice that you cannot downgrade back to the 1.1.x firmware after upgrade to this newer 1.2.1 firmware.
Note:
1. Upgrade Wireless Drive to enhance system stability and compatibility.
2. Newly support 3-band (2.4GHz + 5GHz + 6GHz) MLO connection.
3. Newly support EasyMesh Topology Map.
4. Newly support EasyMesh in AP mode.
5. Newly support WebUI in EasyMesh Satellite/Agent mode, providing functions like LED control, reboot, firmware upgrade, and more.
6. Newly support DoH/DoT.
7. Newly support ECO mode.
8. Newly support set Wi-Fi Schedule separately for different Wi-Fi channels.
9. Newly support Guest network isolation from the main network in AP mode.
10. Newly support multi selection in the Access Control allow list function.
11. Newly support TAP mode in OpenVPN server function.
12. Newly support setting the client IP range of the PPTP/L2TP/IPsec VPN server to match the main network's DHCP range.
13. Optimized the traffic recognition with newly support DPI function.
14. Enhanced system stability and security.
|
|
Archer BE800(US)_V1_1.2.1 Build 20250108
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2025-02-12
|
Language: Multi-language
|
File Size: 55.21 MB
|
This firmware introduces wireless driver update to enhance the system stability and compatibility, also a lot of new functions supported like DoH/DoT and EasyMesh in AP mode, so it's strongly recommended to upgrade to this version.
Please notice that you cannot downgrade back to the 1.1.x firmware after upgrade to this newer 1.2.1 firmware.
Note:
1. Upgrade Wireless Drive to enhance system stability and compatibility.
2. Newly support 3-band (2.4GHz + 5GHz + 6GHz) MLO connection.
3. Newly support EasyMesh Topology Map.
4. Newly support EasyMesh in AP mode.
5. Newly support WebUI in EasyMesh Satellite/Agent mode, providing functions like LED control, reboot, firmware upgrade, and more.
6. Newly support DoH/DoT.
7. Newly support ECO mode.
8. Newly support set Wi-Fi Schedule separately for different Wi-Fi channels.
9. Newly support Guest network isolation from the main network in AP mode.
10. Newly support multi selection in the Access Control allow list function.
11. Newly support TAP mode in OpenVPN server function.
12. Newly support setting the client IP range of the PPTP/L2TP/IPsec VPN server to match the main network's DHCP range.
13. Optimized the traffic recognition with newly support DPI function.
14. Enhanced system stability and security.
|
|
Archer BE800(AU)_V1_1.1.6 Build 20240808
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2024-08-29
|
Language: Multi-language
|
File Size: 50.22 MB
|
This firmware introduces the wireless firmware update, enhances system stability, and optimizes MLO network stability.
Note:
1. Updated wireless firmware to fix related instability issues.
2. Fixed the MLO disconnection issue with the Samsung S24U and other similar WiFi 7 clients.
3. Updated default encryption to WPA2/WPA3 for main 2.4G and 5G Wi-Fi networks.
4. Fixed the bug allowing clients on Guest Wi-Fi to access USB sharing in AP mode.
5. Enhanced VPN stability.
6. Fixed the issue where tether clients show no clients in special cases.
7. Improved app performance with server request optimizations.
8. Fixed the issue where DDNS stops working in special cases.
|
|
Archer BE800(US)_V1_1.1.6 Build 20240808
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2024-08-27
|
Language: Multi-language
|
File Size: 50.22 MB
|
This firmware introduces the wireless firmware update, enhances system stability, and optimizes MLO network stability.
Note:
1. Updated wireless firmware to fix related instability issues.
2. Fixed the MLO disconnection issue with the Samsung S24U and other similar WiFi 7 clients.
3. Updated default encryption to WPA2/WPA3 for main 2.4G and 5G Wi-Fi networks.
4. Fixed the bug allowing clients on Guest Wi-Fi to access USB sharing in AP mode.
5. Enhanced VPN stability.
6. Fixed the issue where tether clients show no clients in special cases.
7. Improved app performance with server request optimizations.
8. Fixed the issue where DDNS stops working in special cases.
|
|
Archer BE800(AU)_V1_1.1.5 Build 20240528
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2024-07-09
|
Language: Multi-language
|
File Size: 50.22 MB
|
New Features/Enhancement:
1. Enhanced the system stability;
2. added support for the Fing.
|
|
Archer BE800(US)_V1_1.1.5 Build 20240528
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2024-06-17
|
Language: Multi-language
|
File Size: 50.22 MB
|
New Features/Enhancement:
1. Enhanced the system stability;
2. added support for the Fing.
Bug fixes:
1. Fixed some stability bugs;
2. Fixed some bugs that caused internet abnormality when enabling the QoS function.
|
|
Archer BE800(US)_V1_1.1.4 Build 240520
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2024-05-31
|
Language: Multi-language
|
File Size: 49.16 MB
|
Note:
Optimized wireless performance;
Enhanced system stability.
|
|
Archer BE800(AU)_V1_1.1.3 Build 20240424
|
Download
|
|
Published Date: 2024-06-05
|
Language: Multi-language
|
File Size: 49.96 MB
|
Note:
Fixed the issue that the OFDMA+MU-MIMO option in wireless setting cannot be saved;
Enhanced system stability.
|
|
Archer BE800(AU)_V1_1.1.1 Build 20240227
|
Download
|
|
Published Date: 2024-04-23
|
Language: Multi-language
|
File Size: 49.70 MB
|
This update introduces EasyMesh Ethernet backhaul and 6GHz backhaul, bug fixes related with the Samsung S24 Ultra, security updates for the Router.
Note:
1. Newly support EasyMesh Ethernet backhaul and 6GHz backhaul:
a. Please also upgrade the Satellite EasyMesh Router to the newer firmware;
b. You can just connect existing Satellite EasyMesh Router to the Main EasyMesh Router with Ethernet cable, then they could work in Ethernet backhaul mode.
c. If the Satellite EasyMesh Router has been restored to factory settings, please connect it to the Main EasyMesh router by LAN port in the first connection, the Satellite will be added automatically, then you can relocated the Satellite and change the Ethernet cable to the Satellite EasyMesh Router's WAN port after that;
2. Fixed the known bugs related with Samsung S24 Ultra which might lead to the crash and auto-reboot on the Router side;
3. Fixed the function bugs like abnormal Guest Wi-Fi button on Android App, Tether traffic statistics abnormal issue, etc;
4. Fixed the known bugs related with MLO Wi-Fi, when it's set to the Same SSID with the main Wi-Fi, random roaming issue might lead to router crash and reboot.
BTW, it's recommended to set the MLO Wi-Fi SSID separated from the main Wi-Fi SSID, then only connect Wi-Fi7 compatible devices to it;
5. Updated the security fix that we found recently.
|
|
Archer BE800(US)_V1_1.1.1 Build 20240227
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2024-04-01
|
Language: Multi-language
|
File Size: 49.70 MB
|
This update introduces EasyMesh Ethernet backhaul and 6GHz backhaul, bug fixes related with the Samsung S24 Ultra, security updates for the Router.
Note:
1. Newly support EasyMesh Ethernet backhaul and 6GHz backhaul:
a. Please also upgrade the Satellite EasyMesh Router to the newer firmware;
b. You can just connect existing Satellite EasyMesh Router to the Main EasyMesh Router with Ethernet cable, then they could work in Ethernet backhaul mode.
c. If the Satellite EasyMesh Router has been restored to factory settings, please connect it to the Main EasyMesh router by LAN port in the first connection, the Satellite will be added automatically, then you can relocated the Satellite and change the Ethernet cable to the Satellite EasyMesh Router's WAN port after that;
2. Fixed the known bugs related with Samsung S24 Ultra which might lead to the crash and auto-reboot on the Router side;
3. Fixed the function bugs like abnormal Guest Wi-Fi button on Android App, Tether traffic statistics abnormal issue, etc;
4. Fixed the known bugs related with MLO Wi-Fi, when it's set to the Same SSID with the main Wi-Fi, random roaming issue might lead to router crash and reboot.
BTW, it's recommended to set the MLO Wi-Fi SSID separated from the main Wi-Fi SSID, then only connect Wi-Fi7 compatible devices to it;
5. Updated the security fix that we found recently.
|
|
Archer BE800(AU)_V1_1.0.12 Build 20231117
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2024-01-05
|
Language: Multi-language
|
File Size: 49.70 MB
|
Note:
Fixed the issue that download may fail when downloading big files;
Fixed the issue that NAT loopback doesn't work on the FTP port 21;
Enhanced system stability.
|
|
Archer BE800(US)_V1_1.0.12 Build 20231117
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2023-12-25
|
Language: Multi-language
|
File Size: 49.70 MB
|
Note:
Fixed the issue that download may fail when downloading big files;
Fixed the issue that NAT loopback doesn't work on the FTP port 21;
Enhanced system stability.
|
|
Archer BE800(US)_V1_1.0.9 Build 20230914
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2023-10-07
|
Language: Multi-language
|
File Size: 49.57 MB
|
Note:
Improved device stability;
Fixed the bug that caused the device to restart under specific operations;
Fixed the bug where the 2.4G signal occasionally disappeared in specific environments;
Fixed the bug where Access Control occasionally didn't take effect in AP mode.
|
|
Archer BE800(AU)_V1_1.0.9 Build 20230914
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2023-09-28
|
Language: Multi-language
|
File Size: 49.57 MB
|
|
|
|
Archer BE800(US)_V1_1.0.6 Build 20230706
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2023-07-13
|
Language: Multi-language
|
File Size: 49.60 MB
|
This firmware contains important updates for HomeShield Pro, and we strongly recommend all HomeShield Pro users to upgrade to this firmware.
You will be unable to downgrade to the previous firmware version after updating this firmware.
New Features/Enhancement:
1. Optimized the SFP+ port compatibility;
2. Enhanced USB Sharing performance.
Bug Fixed:
Fixed some bugs related to the HomeShield feature;
Fixed the bug related to the EasyMesh function.
NOTE:
To fully utilize all HomeShield Pro features, we recommend that you download and install the latest version of the Tether app on your mobile device.
For Android users: Recommended Tether version 4.1.23 or later
For iOS users: Recommended Tether version 4.1.11 or later
|
|
Archer BE800(US)_V1_1.0.2 Build 20230509
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2023-05-18
|
Language: Multi-language
|
File Size: 48.45 MB
|
New Features/Enhancement:
1. Improved the performance and stability of the wireless network;
2. Optimized the wireless channel automactic selection feature.
Bug Fixed:
1. Fixed some security bugs;
2. Fixed some bugs related to the HomeShield feature;
3. Fixed compatibility issues with OnePlus11 smartphones;
3. Fixed the bug that online client list doesn't work properly in some special cases.
|
|
Archer BE800(US)_V1_1.0.1 Build 20230423
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2023-05-06
|
Language: Multi-language
|
File Size: 48.19 MB
|
This update optimizes performance & function to improve the user experience and it is recommended for all Archer BE800 users.
New Features/Enhancement:
1. Enhanced system stability;
2. Optimized wireless performance;
3. Optimized EasyMesh function;
4. Optimized UI display;
Bug Fixed:
1. Fixed the bug that the WiFi signal could not be found in some cases;
2. Fixed the bug that the EasyMesh function could not find the device on occasion;
3. Fix the bug that MLO network is not visible in some cases;
4. Fix the bug of occasionally inaccurate traffic statistics;
5. Fix the bug that the auto-update function does not take effect in some cases;
|
|
Archer BE800(US)_V1_1.0.0 Build 20230322
|
Download
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
Published Date: 2023-04-25
|
Language: Multi-language
|
File Size: 48.19 MB
|
Note:
First firmware released.
|
More
Fold
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-LINK partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-LINK products for direct download and further information, including a list of TP-LINK software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- TP-Link Tether
TP-Link Tether provides the easiest way to access and manage your network with your iOS or Android devices. Learn more about TP-Link Tether and Compatible Devices
Note: To use Tether, please update your TP-Link device's firmware to the latest version.
Emulators
Firmware Version |
Working Mode |
Language |
|
20190321 |
- |
English |
|
Note:
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.
BE19000 Tri-Band Wi-Fi 7 Router
