Tải về cho TL-R600VPN | TP-Link Việt Nam

Câu hỏi thường gặp

How to set up Port Forwarding feature on TP-Link SMB Router (new UI) 04-03-2025191361
Why virtual server (port forwarding) feature is not working on your TP-Link Business router? 07-23-2024128666
What to do if you cannot access the remote network through Client-to-LAN/Site VPN tunnel 07-23-2024144921
How to check the link status and data traffic statistics of TP-Link Business Routers with SNMP 07-23-202497832
How to access the internet by using VPN Server as a proxy gateway 07-23-2024229722
Why cannot I get multi-wan bandwidth aggregation test effect via speedtest.net by SMB router? 07-23-2024144702
How to limit specific IP to access to internal server by TP-LINK SMB router 07-23-2024152982
Why your tested throughput is different from our NAT Throughput? 07-01-202492345
How to configure PPTP/L2TP client on remote PC 01-10-2024241885
How to configure Policy Routing on Dual WAN Router using the new GUI 12-27-2023169062
Cách cài đặt router SafeStream ở chế độ độc lập 01-19-2023119110
Cách định cấu hình Sao lưu liên kết trên Router Dual WAN bằng GUI mới 08-09-2022310956
Cách định cấu hình Phát hiện trực tuyến để kiểm tra liên kết WAN bằng GUI mới 08-09-2022112791
Làm cách nào để mở port trên Router TP-Link của bạn 07-06-20121118722
Làm sao để giới hạn phiên làm việc (Session) trên router TP-Link 07-05-2012344467
Làm thế nào cấu hình Domain Filtering(blocking) trên router TP-Link. 07-10-2012337785
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022380180
How to configure IPSec LAN to LAN VPN for multiple subnets using the new GUI 06-27-2022129630
How to configure remote management on SMB router using the new GUI 06-27-2022141318
How to configure One-to-One NAT on Safestream routers using the new GUI 06-27-2022134900
How to configure Session Limit and Bandwidth Control to control traffic on SafeStream routers using the new GUI 06-27-2022108279
How to establish PPTP Server by SMB VPN Router using the new GUI 06-27-202297745
How to establish L2TP Server by SMB VPN Router using the new GUI 06-27-2022115701
How to configure WOL (Wake On LAN) on TP-Link SafeStream Router using the new GUI 06-27-2022259412
How to configure LAN-to-LAN IPsec VPN on TP-Link Router using the new GUI 06-27-2022285677
How to configure GreenBow IPsec VPN Client with a TP-Link VPN Router using the new GUI 06-27-202291877
How to configure Shrew Soft VPN Client with a TP-Link VPN Router using the new GUI 06-27-202293893
How to configure 802.1Q VLAN on TP-Link Load Balance and VPN routers using the new GUI 06-27-2022225550
How to set up access rules for TP-Link SMB router? 09-28-2021118601
How to configure MAC Filtering on TP-Link SMB Routers (New UI) 09-26-202166268
Làm thế nào để cấu hình MAC Filtering Router TP-Link 07-26-2012462800
Thiết lập Site- to- Site IPsec VPN trên Router TP-Link 07-13-2012492757

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Làm sao để biết phiên bản phần cứng của thiết bị TP-Link
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TL-R600VPN(UN)_v4_4.0.4 Build 20200313

Tải Về

Ngày Phát Hành: 2020-05-12

Ngôn Ngữ: English

Kích cỡ tập tin: 9.99 MB

New Feature/Enhancement:

1. Add DHCP Option 66, Option 150, Option 159, Option 160, Option 176 and Option 242.

2. One-to-One NAT supports the loopback function of the WAN port.

3. Support to obtain SNMP information through WAN port and VPN connection.

4. Support IPv4 Local Scope IP address 239.255.0.0/16.

5. Optimize the mechanism of the session limit function.

6. Firewall optimization for PCI DSS vulnerability scanning.

7. Optimize the DHCP Server mechanism, LAN devices can obtain IP addresses faster.

8. UPnP supports adding random codes to URL to prevent DNS Rebinding attacks.

9. Daylight saving time is adjusted from GMT to UTC.

10. Security vulnerability optimization.

Bug Fixed:

1. Fix the bug that URL Filtering is unsuccessful when accessing a website subdirectory with“/”.

2. Fix the bug that the backup WAN port will not restore PPPoE dialing automatically when deleting the Link Backup entries.

3. Fix the bug that VPN cannot be used after creating multiple IPSec VPN entries.

4. Fix the bug that LAN PC may not be able to upload data to an external server.

5. Fix the bug that the VPN clients at both ends of the IPSec VPN may not be able to communicate with each other after restarting the router or modifying the WAN mode.

6. Fix the bug that the VPN cannot be used normally after opening the DMZ function.

7. Fix the bug that the UPnP NewExternalIPAddress interface cannot correctly obtain the IP address of WAN port.

Notes:

1. For TL-R600VPN (UN) 4.0 only.

2. Your device's configuration won't be lost after upgrading.

TL-R600VPN(UN)_v4_20190227

Tải Về

Ngày Phát Hành: 2019-03-22

Ngôn Ngữ: English

Kích cỡ tập tin: 9.98 MB

1. Update HTTPS encryption suite to TLS1.2
2. Support PCI DSS Scanning
3. Support enable and disable HTTPS Server.
4. Disable telnet function in default Setting.
5. Increase Apple Time Server to default NTP Server.
6. Optimize session limit function
7. Optimize the rules for modifying the MAC address of router when exporting or importing configuration file.
8. Fix the problem that the Rate Control function does not work after the router is restarted;
9. Fix the problem that the link backup function does not work when working in Timing mode;
10. Fix abnormal routing problem in Link Backup function;
11. Fix the problem that can not build Client to LAN and LAN to LAN IPSec VPN when configuring the same Local Subnet.

TL-R600VPN(UN)_v4_20180530

Tải Về

Ngày Phát Hành: 2018-06-28

Ngôn Ngữ: English

Kích cỡ tập tin: 9.93 MB

Modifications and Bug Fixes:
1. Fix DHCP server will hang when modifying it after assigning IP to clients with the same name;
2. Enhance the Firewall module for VPN;
3. Fix bugs that it cannot establish L2TP over IPsec VPN connection when NAT exists;
4. Enhanced contents of System Log module;
5. Improve Dynamic DNS could create multi domain entries for one account;
6. Enhance the stability and speed up the dial process of WAN;
7. Add multi WANs selection for NAT/Policy Routing/primary WAN of Link Backup;
8. Add Only, Priority two modes for Policy Routing feature;
9. Add two sub-modes of Failover mode for Link Backup feature;
10. IP-MAC Binding entries will no longer take effect when ARP Spoofing Defense is disabled.
Notes:
For TL-R600VPN V4.0

Sử dụng Firmware của bên thứ 3 trên sản phầm TP-Link

Một số firmware chính thức của các sản phẩm TP-LINK có thể được thay thế bằng firmware của bên thứ ba chẳng hạn như DD-WRT. TP-LINK không cung cấp vấn đề hỗ trợ kĩ thuật và đảm bảo hiệu năng cũng như tính ổn định của firmware bên thứ ba. Khi sản phẩm bị hư hại do sử dụng firmware của bên thứ 3 thì chế độ bảo hành sản phẩm sẽ bị vô hiệu.

GPL Code

TL-R600VPN(UN)_V4_GPL

Giả lập

Phiên Bản Firmware	Working Mode	Ngôn Ngữ
171128	-	English	Browse

Lưu ý:

1. Trình giả lập là một Giao Diện Người Dùng (GUI) Web ảo, nơi bạn có thể trải nghiệm bảng quản lý sản phẩm TP-Link.

2. Các trình giả lập được liệt kê có thể không có firmware mới nhất.

3. Các tính năng được hiển thị mang tính chất tham khảo và tính khả dụng của chúng có thể phụ thuộc vào các quy định của địa phương. Để biết thêm thông tin, vui lòng tham khảo biểu dữ liệu (datasheet) hoặc trang sản phẩm.

Tải về cho TL-R600VPN V4

Câu hỏi thường gặp

Firmware

To Upgrade

Sử dụng Firmware của bên thứ 3 trên sản phầm TP-Link

GPL Code

Giả lập

Feature Configuration Guide