How to log into the web management page of 3G 4G Wireless N Router (new logo)?

Configuration Guide
Updated 04-23-2020 02:00:55 AM 1866
This Article Applies to: 

The web-based management page is a built-in internal web server that does not require internet access.  It does however require you device to be connected to the TP-Link router.  This connection can be wired or wireless.

Note: Low version of your web browser may cause compatibility problem with the web-based interface (management page) of your device, such as unable to log into the interface, display incomplete features etc. It is strongly recommended to use a wired connection if you are going to change the router’s wireless settings or upgrade the firmware version of the router.

Follow the steps below:

Here takes TL-MR3420 as demonstration.

1. Connect your computer to the router.

Method 1: Wired

Connect your computer’s Ethernet port to one of the LAN ports on Archer MR200 via an Ethernet cable.

Method 2: Wirelessly

Use the default SSID (Wireless Network Name) and Wireless Password printed on the product label of the router to connect wirelessly.

2. Launch a web browser and type in http://tplinkwifi.net. Set a strong password using 1-15 characters and click Save.

https://static.tp-link.com/image001_1505381029180c.png

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Підписатись на розсилкуTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.

From United States (English)?

Check products and services for your region.