Descarga para T1500G-10PS V2

Elige una versión de hardware:

>¿Cómo encontrar la versión del hardware en un dispositivo TP-Link?

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.

Descripción General

T1500G-10PS(TL-SG2210P)_V2_Datasheet

Documento

Preguntas Frecuentes

Troubleshooting Instruction of TP-Link switch’s SFP port 12-31-20192687
The difference between the Voice VLAN feature and Auto VOIP feature 11-04-20193847
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI? 11-04-201919874
What should I do if I cannot access the web management page of my TP-Link switch? 09-06-201972385
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI? 03-21-201910597
How to configure Port Isolation on Smart and L2 Managed Switches using the new GUI? 07-05-20188509
How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI? 06-06-201831154
How to configure MAC ACL on Smart and L2 Managed switches using the new GUI 06-06-20187072
How to configure MSTP on L2 Managed switches using the new GUI? 05-07-20187842
How to configure RSTP on TP-Link switches using the old GUI? 05-07-201834938
How to configure STP/RSTP on L2 Managed switches using the new GUI? 05-04-201810663
How to configure Access Control to block users' access to the switch using the new GUI？ 04-19-20187380
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-201819237
How to configure backup image when upgrading a firmware on TP-Link Smart/Managed Switches using the new GUI? 04-09-20187309
How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI? 03-29-201817077
How to configure Getting Time from NTP Server on TP-Link Smart & Managed Switch? 03-29-201870702
Why are some functions lost after I log in to the switch? 03-12-20185943
How to configure the default gateway of the smart and managed switches using the old GUI? 03-12-201872945
How to configure the default gateway of the smart and L2 managed switches using the new GUI? 03-12-201817244
¿Cómo cambiar la dirección IP del Switch TP-Link usando la Web GUI y CLI? 12-29-2016116097
How to change the IP address of the smart and L2 managed switches using the new GUI and CLI? 03-12-201822821
How to configure LACP on our Smart/ Managed Switch? 03-02-201872000
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 12-29-201617050
How to build up an 802.1X access authentication system using TP-Link switch? 09-02-201635070
How to build a Wireless Network for Chain Store using tp-link products? 08-30-201610819
How to choose PoE switch? 06-24-201622278
How to configure MAC ACL on Smart/Managed switch? 05-25-201619126
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser? 05-25-201630559
How to configure IGMP Snooping for IPTV network using L2 switch? 04-26-201672974
Why the Firmware Version Does Not Change after Upgrading in T Series Switches? 01-14-201612226
How to Block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 12-17-201517872
What are the differences in features and application scenarios among various serial switches? 02-05-201570413
¿Cómo Configurar un Multi-SSID (VLAN) de AP de TP-Link para trabajar con un Switch? 08-09-2012163278
How to configure 802.1q VLAN on Smart Switches？ 11-21-201347547
How to Configure Port Mirror on TP-Link Smart Switches and L2 Managed Switches? 10-28-201315316

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）
¿Cómo encontrar la versión del hardware en un dispositivo TP-Link?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T1500G-10PS(UN)-V2-20200109

Fecha de Publicación : 2020-04-20

Idioma: Inglés

Tamaño del Archivo : 9.15 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing reset option from Bootutil.
4. Add built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled.
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T1500G-10PS(UN) V2.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.

3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T1500G-10PS(UN)_v2_190509

Fecha de Publicación : 2019-07-25

Idioma: Inglés

Tamaño del Archivo : 8.84 MB

Modifications and Bug Fixes:
1. Enhanced the MVR function.
2. Support TLS 1.2.
3. Fix the bug that NTP server will be changed when set up only one NTP server and fail to get the time.
4. Fix the bug that cannot set up auto mode for fiber ports which in portchannel.
5. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
1. For T1500G-10PS(UN) 2.0.
2. If your device's Hardware Version is 1.0, after upgrading to this firmware, the old configuration will be lost.

T1500G-10PS(UN)_V2_180330

Fecha de Publicación : 2018-08-07

Idioma: Inglés

Tamaño del Archivo : 7.58 MB

First firmware released.
Notes: For T1500G-10PS(TL-SG2210P)(UN) 2.0

Usar Firmware de Terceros en los Productos de TP-Link

Algunos firmware oficiales de los productos de TP-Link pueden ser sustituidos por el firmware de terceros como DD-WRT. TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para los mismos, y no garantiza el desempeño y la estabilidad del firmware de terceros. Los daños al producto como resultado del uso de firmware de terceros, anulará la garantía del producto.

Abrir el Código Fuente Para Programadores (GPL)

La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.

Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.

Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.

Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.

Archivos MIBs

T1500G-10PS(UN)_V2_MIB_20180330
Fecha de Publicación : 2019-05-13	Idioma: Inglés	Tamaño del Archivo : 205.66 KB
Sistema de Operación : Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

Cliente 802.1X

TP-LINK_802.1X_Client_Software
Fecha de Publicación : 2017-09-05	Idioma: Inglés	Tamaño del Archivo : 5.5MB
Sistema de Operación : Win2000/XP/2003/Vista/7/8/8.1/10

Código GPL

T1500G-10PS(UN)_V2_GPL

Simuladores

Versión de Firmware	Working Mode	Idioma
180330	-	Inglés	Navegador

Q&A

Feature Configuration Guide

T2700G-28TQ License Download
License Model:	T2700G-28TQ-L1000	Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code:

Descarga para T1500G-10PS V2

Preguntas Frecuentes

Firmware

To Upgrade

Archivos MIBs

Cliente 802.1X

Código GPL

Simuladores

Q&A

Feature Configuration Guide

SuscripciónTP-Link toma en serio su privacidad. Para obtener más detalles sobre las prácticas de privacidad de TP-Link, consulte la Política de privacidad de TP-Link.

Síguenos