Search
Search

How to add another powerline adapter to the existing powerline network with pair button?

Configuration Guide
Updated 09-06-2019 07:55:21 AM 108960
This Article Applies to: 

I want to:

Add a new powerline adapter into the existing powerline network to extend my network.

For example, I’ve already set up a powerline network using powerline devices, but the network does not reach everywhere I need it to. I purchased another one to further extend my network.

How can I do that? Here takes TL-PA9020P KIT as demonstration.

1. Plug the new powerline adapter into a wall outlet near one of the existing powerline devices.

2. Wait for a minute, and check whether the Powerline LED  stays on. If it’s on, skip to step 3. If it’s not, continue with step 2 to pair the new powerline adapter into the secured powerline network.

a. Press the Pair button on one of the existing powerline devices for 1 second. Its Power LED  starts blinking.

b. Within two minutes, press the Pair button on the new powerline adapter for 1 second. Its Power LED starts blinking. When the Powerline LED  stays on and solid, the pairing process is complete.

3. Relocate the new powerline adapter to the place where wired Internet access is needed.

Done!

Enjoy the Internet through your extended network!

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Iscriviti alla newsletter TP-Link prende la Privacy seriamente. Per maggiori informazioni sul trattamento dei tuoi dati consulta l'Informativa Privacy.

Seguici

L'azienda
Stampa
Dove Acquistare
Partner Program
Learning Center
Italia / Italiano
Copyright © 2021 TP-Link Corporation Limited. Tutti i diritti riservati.

From United States?

Check products and services for your region.

Go Other Option