How to access TP-Link router’s Web GUI setting page via HTTPS

When You Set Up
Updated 06-24-2022 06:27:08 AM 10402
Ez a leírás a következő eszköz(ök)re alkalmazható:: 

Note:

HTTPS is a web access protocol which used for secure communications during web browsing.

This article will tell you how to access the TP-Link router’s Web GUI setting page via HTTPS protocol.

Step 1: Access the Web GUI

Enter the address https://tplinkwifi.net in the URL bar on your browser.

Step 2: Allow access to the Web GUI

Click on Advanced, then click on Proceed to tplinkwifi.net (unsafe).

A warning message will show as below due to the browser requiring a signed certificate. Please don’t worry about that. The reason why browsers recognize tplinkwifi.net as “Not secure” is that tplinkwifi.net’s Certificate is a self-signed certificate. Most browsers will show this warning because tplinkwifi.net is not an authoritative CA. We can promise that the connection between your browser and the tplinkwifi.net server is secure.

For more information about the self-signed certificate and unsecure notice, please refer to the FAQ here: Why TP-Link HTTPS web interface is detected as unsecure by some web browsers?

Note 1: You must type the entire address on the URL bar of the browser, including “https://”.

Note 2: If you cannot enter the Web GUI by https://tplinkwifi.net, please try the router’s Lan IP to access such as https://192.168.0.1, which 192.168.0.1 is the LAN IP of your router.

Related FAQs

Ez a GY.I.K. hasznos volt?

Véleménye segíti az oldal fejlesztését

Recommend Products

Feliratkozás a hírlevélreA TP-Link komolyan veszi az adatok védelmét. További információért látogassa meg a TP-Link Adatvédelmi irányelvek oldalt..

From United States?

Get products, events and services for your region.