How to access USB storage device on the TP-Link Routers from Windows or MacOS

Configuration Guide
Updated 06-29-2022 02:29:35 AM 166776
This Article Applies to: 

This article tells you how to access the USB storage device on the Windows and macOS via Samba, FTP locally and remotely.

Router Settings

1. Plug the USB storage device into the USB port of the TP-Link router.

2. Log in to the router’s webpage. You may refer to the FAQ How do I log into the web-based Utility (Management Page) of the TP-Link wireless router?

3. Go to USB settings. (Advanced->USB->USB storage Device). If the router recognizes the USB storage device, it will show in the status.

4. Considering the safety, we suggest you enable the“Secure Sharing” option to prevent others from accessing your USB drive without login.

Access the USB drive on Windows and macOS.

There are 2 options to visit the USB drive. Please make sure the corresponding services are enabled.

Option 1. Access USB drive locally

1). Windows.

SMB(Samba):

Open File explorer. Type \\tplinkwifi.net or \\192.168.0.1

Note:192.168.0.1 is the LAN IP of the router. If you have changed it, please use the current LAN IP of our router.

Type in the username and password above to log in.

FTP:

Open File explorer, type ftp://tplinkwifi.net or ftp://192.168.0.1. Type in the username and password above to log in.

2) MacOS.

Open Finder, select “Go”, then click “Connect to Server...”

SMB(Samba):

Type smb://tplinkwifi.net or smb://192.168.0.1 .(192.168.0.1 is the LAN IP of router)

FTP:

Type ftp://tplinkwifi.net or ftp://192.168.0.1

Type the username and password above to login.

Option 2. Access USB drive remotely.

Please attention that only FTP is supported to access the USB drive remotely. Check “Internet FTP”, then click save to enable the Internet FTP service. Using the address in the screenshot to visit the USB remotely.

1). Windows.

Open File explorer. Type in ftp://WAN IP

Remind:

The IP address 10.10.10.13 in this example is the WAN IP of your router. (Find the WAN IP via Advanced >- Status)

2).MacOS.

Open Finder, select “Go”, then click “Connect to Server...”.Type in ftp://WAN IP to access the USB drive remotely. Type in your username and password to log in.

If you need to access a USB storage device from the phone, please refer to the FAQ:

How to access my USB storage device on the TP-Link Routers from my Android and IOS phone?

To get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Is this faq useful?

Your feedback helps improve this site.

SubscriptionTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.

From United States?

Get products, events and services for your region.