Why the signal is not boosted after changing antennas?
User Application Requirement
Actualizado11-07-2012 15:17:52 PM
539
539 - Check whether the connector is securely connected. Loosen connection decreases the signal.
- Check whether the gain of the replaced antenna is higher than the original one. You can check the spec on www.tp-link.com for detailed gain of the bundled antennas.
- Check whether the impedance is matched. The impedance should be 50 Ohms, otherwise the signal will probably not be boosted.
- Do not use extension cable unless it is really necessary. The longer the cable is, the higher the attenuation will be.
- Try different locations. By using higher gain antennas the wireless signal will be more focused in a particular direction (Check the antenna’s radiation pattern for detail). Therefore, try adjusting the location of your wireless devices.
¿Es útil este artículo?
Tus comentarios nos ayudan a mejorar esta web.