-
РЕШЕНИЯ ЗА ДОМА
Your doorway to the internet
Решения за разширение на мрежата
Easy ways to expand and enhance your network
Keeping your home wired for quality connections
Everything else you need for a connected lifestyle
-
Умен ДОМ
Keeping an eye on what matters
Smarten up your home devices
Light for every occasion
Extend Wi-Fi and manage with Kasa app
-
Бизнес решения
High-Speed wired networking from L3 managed to unmanaged
Точки за достъп под управлението на софтуер контролер
Professional business Wi-Fi with centralized management
The smarter cloud solution for business networking
Pharos Бизнес Oudoor Wireless Broadband
Ideal for long range wireless broadband networking
Secure VPN and Load Balance gateways to the business
VIGI video surveillance is dedicated to your security
-
ДОСТАВЧИЦИ НА УСЛУГИ
Capable of high-speed network and integrated broadband applications
Сигурен достъп до интернет в движение.
The leading technology for delivering gigabit Internet services
Трансформират електрическата инсталация за пренос на мрежов сигнал.
Easily expand your Wi-Fi coverage.
Увеличават производителността на вашата бизнес мрежа.
Увеличават производителността на вашата Wi-Fi бизнес мрежа
How to do troubleshooting from the system log when PPPoE connection fails?
This FAQ is for the users who have a DSL bridge modem with PPPoE service and need to do PPPoE connection on the TP-link router. If you are using Cable Modem, please ignore the article.
The PPPoE connection includes two phases: PPPoE Discovery phase and PPPoE Session phase. There are four steps to the Discovery stage: PADI, PADO, PADR, PADS and three steps to the Session stage: LCP, Authentication(includes two types: CHAP and PAP) and IPCP.
The three cases below are about how to read the system log of the router to find out why the PPPoE connection fails.
Case 1.
If the PPPoE connection is successful, it will get through the PPP Discovery phase and Session phase, then shows PPPoE connected.
The the system log is as below:
Case 2.
If the username or password is incorrect, it can get through the PPP Discovery stage, but in the PPP Session stage, there would be an error message: Failed to authenticate ourselves to peer. In this case, you need to check the username and password with your Internet service Provider.
The system log is as below:
Case 3.
If the WAN port is unplugged, it cannot get through the PPP Discovery Stage. It repeats sending PADI packets, but never succeeds. In this case, you need to check whether you have correctly plugged your modem into the WAN(Internet) port of the router.
The system log is as below:
Note:
You need to log in the router’s web management page, go to “System Tools→System Log” to read/save the log. If you do not know how to log in the web management page, please refer to FAQ 87.
Your feedback helps improve this site.
Присъединете се към TP-Link общносттаTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.