Search
Search

How to reset my Tapo camera

Configuration Guide
Updated 01-15-2020 03:39:05 AM 25883
This Article Applies to: 

There are two methods to reset the Tapo camera to its default settings.

Method 1: Use the RESET button

For Tapo C200

While the camera is powered on, tilt the camera lens up, then press and hold the RESET button for at least 5 seconds until the LED blinks red. The camera will reset and reboot.

For Tapo C100

While the camera is powered on, press and hold the Reset button for at least 5 seconds until the LED blinks red. The camera will reset and reboot.

 

Method 2: Remove the camera via Tapo app

Option 1: Go to Home page

On the home page, long tap on your camera model card. Then tap Remove at the bottom to remove the camera. The camera will be removed from your TP-Link account and reset to the default settings.

 

Option 2: Go to Camera Settings page

1. On the home page, tap on your camera model card or tap Camera Preview > Manage to go to Live View page.

2. On the Live View page, tap the gear icon to enter the Camera Settings page.

3. Tap Remove Camera at the bottom to remove the camera from your TP-Link account. The camera will be removed from your account and reset to the default settings.

 

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Присъединете се към TP-Link общносттаTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.

Следвайте ни

За нас
Преса
Къде да купя
Център за обучение
Bulgaria / Български език
Copyright © 2021 TP-Link Corporation Limited. All rights reserved.

From United States?

Check products and services for your region.

Go Other Option