How to set Access Control of 11N Range Extender (new logo)

Configuration Guide
Updated 06-28-2022 02:23:58 AM 50445
This Article Applies to: 

Access Control allows you to permit or block specific devices from accessing the internet for a specific period.

Here takes TL-WA820RE as demonstration:

1. Log into the Web GUI of the range extender. If you don’t know how to do that, please refer to How to log into the Web GUI of my 11N Range Extender (new logo)?

2. Go to Settings > Advanced Settings > Access Control.

3. Enable Access Control.

To block specific device(s):

Note: Devices connected to the extender via an Ethernet cable cannot be blocked.

1. Select Blacklist and click Save.

2. Select the device to be blocked in the Online Devices table by ticking the corresponding checkbox.

3. Click Block and the selected device(s) will be added to the Devices in Blacklist table.

4. Click in the Devices in Blacklist table to set the Effective Time for a certain entry as needed.

5. Click OK.

To permit specific device(s):

1. Select Whitelist and click Save.

2. Click Add in the Devices in Whitelist table. Enter the Device Name and MAC Address. And you can set the Effective Time for a certain entry as needed.

3. Click OK.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Looking for More

Полезен ли беше този ЧЗВ?

Вашите отзиви помагат за подобряване на този сайт.

Препоръчани продукти

From United States?

Get products, events and services for your region.