-
Home
Create a fast and reliable Wi-Fi
Easy ways to expand and enhance your network
Keeping your home wired for quality connections
-
Smart Home
Keeping an eye on what matters
Smarten up your home devices
Light for every occasion
-
Business
High-Speed wired networking from L3 managed to unmanaged
Professional business Wi-Fi with centralized management
The smarter cloud solution for business networking
Ideal for long range wireless broadband networking
Secure VPN and Load Balance gateways to the business
-
Service Provider
Capable of high-speed network and integrated broadband applications
The reliable choice for home networking
Maintains internet access wherever you go.
The leading technology for delivering gigabit Internet services
Transforms electrical wiring to carry the network signal.
Easily expand your Wi-Fi coverage.
Boosts your business network with premium performance.
Takes your enterprise Wi-Fi to new levels.
How to set up an IPv6 Internet connection on the Wi-Fi Routers (new logo)?
144107 Your ISP provides information about one of the following IPv6 internet connection types: PPPoE, Dynamic IP (SLAAC/DHCPv6), Static IP, 6to4 tunnel, Pass-Through (Bridge).
1. Log in to the web-based interface of the router. If you don’t know how to do that, please refer to
a. How to log in to the web-based interface of Wi-Fi Routers (new logo)?
b. How to log in to the web-based interface of Wi-Fi Routers (new logo)?
2. Go to Advanced > IPv6.
3. Enable IPv6 and select the internet connection type provided by your ISP.
Tips:
If you do not know what your internet connection type is, contact your ISP or judge according to the already known information provided by your ISP.
4. Fill in information as required by different connection types. Red blanks must be filled in.
1) Static IP: Fill in blanks and click Save.
2) Dynamic IP (SLAAC/DHCPv6): Click Advanced to input further information if your ISP requires. Click Save and then click Renew.
3) PPPoE: By default, the router uses the IPv4 account to connect to the IPv6 server. Click Advanced to input further information if your ISP requires. Click Save and then click Connect.
Note:
If your ISP provides two separate accounts for the IPv4 and IPv6 connections, please untick the Use the same session with IPv4 connection checkbox and manually enter the username and password for the IPv6 connection.
4) 6to4 Tunnel: An IPv4 internet connection type is a prerequisite for this connection type. Click Advanced to input further information if your ISP requires. Click Save and then click Connect.
5) Pass-Through (Bridge): Click Save and skip to step 6.
5. Configure LAN ports. Windows users are recommended to choose from the first two types. Fill in Address Prefix provided by your ISP, and click Save.
6. Click Status to check whether you have successfully set up an IPv6 connection. The following figure is an example of a successful PPPoE configuration.
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
Your feedback helps improve this site.
SubscriptionTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.