Vídeo de Configuração

  • How to set up a TP Link EAP via your mobile phone

    This video demonstrates how to set up a TP-Link EAP via your mobile phone. The setup consists of four steps:
    • Connect the EAP to the network
    • Download the Omada APP
    • Connect to the EAP's wireless network
    • Set up the EAP using the Omada APP

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models. (except EAP120 and EAP220)
    • A small number (1-3) of EAPs.

    Apreender mais

  • How to setup the OC200 via a web browser

    This video will demonstrate how to set up the OC200 via a web browser. The setup consists of six steps:
    • Connect the OC200 to your local network.
    • Get ready for setup.
    • Create a TP-Link ID.
    • Log into your TP-Link ID.
    • Add the OC200 to your TP-Link ID.
    • Follow the wizard to set up the OC200.

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Cloud Controller OC200
    • Mass EAPs (usually more than three)

    Apreender mais

  • How to setup the OC200 via your mobile phone

    This video will demonstrate how to set up the OC200 via your mobile phone. You need to use the Omada APP to complete the setup. The setup consists of six steps:
    • Connect the OC200 to your local network.
    • Get ready for setup.
    • Create a TP-Link ID.
    • Log into your TP-Link ID.
    • Add the OC200 to your TP-Link ID.
    • Follow the wizard to set up the OC200.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Cloud Controller OC200
    • Mass EAPs (usually more than three)

    Apreender mais

  • How to manage TP-Link EAPs centrally from a remote place via a web browser

    You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Controller Software (version 3.0.2 or above)
    • Mass EAPs (usually more than three)

    Apreender mais

  • A Quick Overview of EAP Management Methods

    This video will introduce how to choose the optimum method to manage TP-Link EAPs in your scenario.
    Here are three most common Scenarios:
    • Manage one or two EAPs locally
    • Manage three or more EAPs locally
    • Manage EAPs remotely via the cloud
    To choose the optimum management method, consider the following three questions:
    1. Choose Standalone mode or Controller mode for management?
    2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Controller Software?
    3. What kind of user interface will you use, a web browser or the Omada app?

    Apreender mais

  • How to Set up a TP-Link EAP via Web browser

    This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
    1. Connect the EAP to the network
    2. Log into the EAP (via a wired/wireless connection)
    3. Change the default SSID
    This video is suitable for users with a small number (1-3) of EAPs .

    Apreender mais

FAQs

Firmware

Atualização de firmware pode resolver problemas da versão de firmware anterior e melhorar o seu desempenho atual.

Para atualizar

IMPORTANTE: Para evitar falhas de atualização, leia o seguinte, antes de prosseguir com o processo de atualização

  • Verifique a versão de hardware do seu dispositivo para a versão de firmware correta. Atualização incorreta de firmware pode danificar o seu dispositivo e anular a garantia. ( Normalmente V1.x = V1)
    NÃO é recomendado atualizar o firmware de outra região. Por favor clique aqui escolher a sua região e efetuar o download da versão de firmware adequado. (O firmware EU (Europa) e US (Estados Unidos) dispõe de versões de hardware diferentes)
  • NÃO desligue a energia durante o processo de atualização, pode causar danos permanentes ao produto.
  • NÃO atualize o firmware através de ligações Wi-Fi, expeto nos casos onde não dispõe de portas rede LAN/Ethernet no dispositivo TP-Link.
  • Recomenda-se que os utilizadores interrompam todos os acessos à Internet ou simplesmente desconectem a ligação à Internet do dispositivo antes de efetuar a atualização.
  • Para extrair o conteúdo com o ficheiro de atualização, recomendamos a utilização de programas de descompressão, como por exemplo, WinZIP, WinRAR ou 7-Zip.
EAP225(EU)_V3_2.5.0 Build 20190404
Data de Publicação: 2019-05-05 Idioma: Inglês Tamanho: 8.81 MB

Recommended Controller Software Version: Omada Controller v3.1.x or above

 

New Feature/Enhancement:

1. Add Mesh function.

2. Add Radius Accounting to External Radius Server in standalone mode.

3. Add SSID Radius accounting to WPA-Enterprise security mode.

4. Add SSL encryption in Auto Mail of Log Settings.

5. Support the feature of merging 2.4GHz and 5GHz SSID with Controller 3.1.4.

6. Support SSID MAC Authentication to none security mode with Controller 3.1.4.

7. Support channel utilization function with Controller 3.1.4.

8. Support Layer-3 Accessibility in SSH with Controller 3.1.4.

9. Change the rule of the LED when resetting/rebooting EAP.

10. Support UTF8 in SSID character.

11. Optimize Band Steering feature.

 

Bug Fixed:

1. Fixed the bug that the client rate limit doesn't take effect under batch configuration.

2. Fixed the bug that clients cannot access tplinkeap.net in a mixed network of IPv4 and IPv6.

3. Fixed the bug that clients maybe disconnected when enabling Airtime Fairness in 2.4G frequency.

4. Fixed the bug that some SSIDs cannot broadcast when restoring the configuration on the Controller.

 

Notes:

1. For EAP225 v3 only.

2. Your device's configuration won't be lost after upgrading.

3. This version of firmware is applied to Omada APP of version 2.1.X or above.

EAP225(EU)_V3_2.4.0 Build 20181121
Data de Publicação: 2018-12-07 Idioma: Inglês Tamanho: 8.79 MB

Recommended Controller Software Version:  Omada Controller v3.0.x or above

 

New Features/Improvements:

 

1. Add Band Steering/LED Locate/Client rate limit/SSID rate limit Function in Standalone mode.

2. The SSID isolation function is promoted to the Guest Network Function. Wireless Clients connected with Guest SSID can’t communicate with each other and the local network.

3. UI optimization.

4. Add “More Client Detail Log” function at Management->Log Settings->Enable Server to output more client information, such as client MAC address, SSID and AP MAC address.

5. Change the HTTP port of Portal authentication page from 80 to 22080 in standalone mode.

 

 Bug Fixed:

1. Fixed the bug that HTTPS redirection of Portal authentication page will be inoperative when the IP address of Omada EAP and wireless clients belong to different subnet.

2. Fixed the bug that HTTPS redirection of Portal authentication page will be inoperative when Omada Controller and Omada EAP belong to different subnet.

3. Fixed the bug that when we change the IP in standalone mode, the portal authentication page may not pop up successfully.

4. Fixed the bug that the wireless clients may not be redirected to portal authentication page by surfing HTTPS website if we enable Management VLAN function.

5. Fixed the bug that wireless clients connected with 2.4G SSID of EAP may receive broadcast packets from other VLAN.

6. The rate limit of Portal function may not take effect sometimes.

 

Notes:

1. For EAP225_v3 only.

2. Your device's configuration won't be lost after upgrading.

EAP225(EU)_V3_2.3.0 Build 20180628
Data de Publicação: 2018-07-24 Idioma: Inglês Tamanho: 8.73 MB

Recommended Controller Software version: v2.7.x or above

New Feature/Enhancement :
Add support for Fast Roaming (802.11k/v) which can improve user experience when roaming between the EAPs.

Bug Fixed:
1. Fixed the bug that SSID with special characters will lead to https portal redirection failure.
2. Fixed the bug that Rouge AP detection will report AP with positive RSSI value.
3. Fixed the bug that MacBook can't open https page due to macOS doesn't support 512bit certificate key.

Notes:
1. For EAP225_v3 only.
2. Fast Roaming requires that wireless clients support 802.11k/v to take effect.
3. If you managed EAP by Omada Controller, you can't manage this EAP by Web management page, unless you have reset the EAP.
4. Your device's configuration won't be lost after upgrading.

Utilização de firmware de terceiros em produtos TP-Link

Alguns produtos TP-Link permitem a substituição de firmware oficial por firmware de terceiros (Por exemplo DD-WRT). A TP-Link não se sente obrigada a facultar assistência e suporte e não garante estabilidade nem a performance de firmwares de terceiros. Danos provocados pela utilização de firmwares de terceiros, inviabiliza automaticamente a politica de garantia dos nossos produtos.

Código Open Source para Programadores (GPL)

Nota: Os produtos TP-Link contêm parcialmente código de software desenvolvido por terceiros, incluindo software que foi submetido ao GNU General Public License ("GPL"), Versão 1/Versão 2/Versão 3 ou GNU Lesser General Public License ("LGPL"). Pode utilizar a respetiva condição de software seguindo os termos da licença GPL.

Pode rever, imprimir e efetuar o download dos respetivos termos da licença GPL aqui. Terá acesso ao Código Fonte GPL dos respetivos softwares utilizados nos produtos TP-Link para download e investigação, incluindo a lista de software TP-Link que contêm software GPL ao abrigo do Centro de Código GPL.

Os respetivos programas são distribuídos sem qualquer garantia e suporte. Reveja a licença de GNU - General Public License para mais detalhe.

Controller Software

The EAP Controller is used to manage multiple EAPs intensively.

Data de Publicação: 2019-07-04 Idioma: Inglês Tamanho: 120.29MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the process time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

Data de Publicação: 2019-07-04 Idioma: Inglês Tamanho: 124.2MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the process time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

Data de Publicação: 2019-05-28 Idioma: Inglês Tamanho: 102.8MB
Sistema operativo: Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1. Add RADIUS Accounting.

2. Add Controller migrate and Site migrate.

3. Add log for some of portal authentication results.

4. Support POST request for External Web Portal.

5. Optimize Site Management to allow you to import site.

6. Optimize the performance when batch importing MAC address in MAC Filter.

 

Notes:

1. To use Omada Controller 3.1.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.1.X from 2.4.8.

7. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.X.

Data de Publicação: 2019-05-28 Idioma: Inglês Tamanho: 129.13MB
Sistema operativo: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8

New Feature/Enhancement:

1. Add RADIUS Accounting.

2. Add Controller migrate and Site migrate.

3. Add log for some of portal authentication results.

4. Support POST request for External Web Portal.

5. Optimize Site Management to allow you to import site.

6. Optimize the performance when batch importing MAC address in MAC Filter.

 

Notes:

1. To use Omada Controller 3.1.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.1.X from 2.4.8.

7. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.X.

8. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

Data de Publicação: 2019-05-15 Idioma: Inglês Tamanho: 123.26MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add RADIUS Accounting.

2. Add Controller migrate and Site migrate.

3. Add log for some of portal authentication results.

4. Support POST request for External Web Portal.

5. Optimize Site Management to allow you to import site.

6. Optimize the performance when batch importing MAC address in MAC Filter.

7. Discovery Utility won’t be installed in Controller software installation.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.13.

2. To use Omada Controller 3.1.13 new features, you need to upgrade your EAP's firmware to the corresponding version.

3. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

4. Portal configuration will be lost after upgraded to Omada Controller 3.1.13 from 2.4.X or earlier version.

Data de Publicação: 2019-05-15 Idioma: Inglês Tamanho: 127.16MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add RADIUS Accounting.

2. Add Controller migrate and Site migrate.

3. Add log for some of portal authentication results.

4. Support POST request for External Web Portal.

5. Optimize Site Management to allow you to import site.

6. Optimize the performance when batch importing MAC address in MAC Filter.

7. Discovery Utility won’t be installed in Controller software installation.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.13.

2. To use Omada Controller 3.1.13 new features, you need to upgrade your EAP's firmware to the corresponding version.

3. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

4. Portal configuration will be lost after upgraded to Omada Controller 3.1.13 from 2.4.X or earlier version.

Data de Publicação: 2019-03-25 Idioma: Inglês Tamanho: 102.73MB
Sistema operativo: Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. To use Omada Controller 3.1.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.1.X from 2.4.8.

7. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

8. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

9. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

10. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

11. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

12. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

13. Channel utilization will take effect only with new firmware.

Data de Publicação: 2019-03-25 Idioma: Inglês Tamanho: 129.07MB
Sistema operativo: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. To use Omada Controller 3.1.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.1.X from 2.4.8.

7. This version software needs you to install manually via curl command.

8. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

9. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

10. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

11. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

12. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

13. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

14. Channel utilization will take effect only with new firmware.

 

Data de Publicação: 2019-03-08 Idioma: Inglês Tamanho: 123.6MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

2. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

3. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

4. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

5. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

6. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

7. Channel utilization will take effect only with new firmware.

Data de Publicação: 2019-03-08 Idioma: Inglês Tamanho: 127.5MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

2. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

3. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

4. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

5. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

6. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

7. Channel utilization will take effect only with new firmware.

Data de Publicação: 2018-11-08 Idioma: Inglês Tamanho: 102.25MB
Sistema operativo: Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1.  Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2.  Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3.  Prevent Operator users from viewing Device Account information.

4.  Display AP channels in the AP list.

5.  Interchange Map and Statistic page.

6.  UI Optimization

7.  Security flaw optimization: Update the third party libraries to defend the vulnerability attack.

 

Bug Fixed:

1. Fixed the bug that Omada Controller Linux may fail to self-start with system.

2. Fixed the bug that if the PC modifies the local loopback address (127.0.0.1) or some network interface without MAC address, Controller Linux cannot bind the cloud account and appears General Error.

3. Fixed the bug that Omada Controller may not display normally in IE browser.

4. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser.

5. Fixed the bug that the suffix name of the export file of Trust APs may be wrong when export it on Safari browser.

6. Fixed the bug that 2.4G radio configuration page of Mesh AP may appear channel limit selection option.

7. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

8. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8.

Data de Publicação: 2018-11-08 Idioma: Inglês Tamanho: 122.14MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3. Prevent Operator users from viewing Device Account information.

4. Display AP channels in the AP list.

5. Interchange Map and Statistic page.

6. UI Optimization

7. Security flaw optimization: Update the third party libraries to defend the vulnerability attack.

 

Bug Fixed:

1. Fixed the bug that Omada Controller may not display normally in IE browser.

2. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser.

3. Fixed the bug that the suffix name of the export file of trust AP list may be wrong when export it on Safari browser.

4. Fixed the bug that 2.4G radio configuration page may appear channel limit selection of Mesh AP.

5. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

6. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Data de Publicação: 2018-11-08 Idioma: Inglês Tamanho: 126.05MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3. Prevent Operator users from viewing Device Account information.

4. Display AP channels in the AP list.

5. Interchange Map and Statistic page.

6. UI Optimization

7. Security flaw optimization: Update the third party libraries to defend the vulnerability attack.

 

Bug Fixed:

1. Fixed the bug that Omada Controller may not display normally in IE browser.

2. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser.

3. Fixed the bug that the suffix name of the export file of trust AP list may be wrong when export it on Safari browser.

4. Fixed the bug that 2.4G radio configuration page may appear channel limit selection of Mesh AP.

5. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

6. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Data de Publicação: 2018-11-08 Idioma: Inglês Tamanho: 127.91MB
Sistema operativo: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above

New Feature/Enhancement:

1.  Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2.  Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3.  Prevent Operator users from viewing Device Account information.

4.  Display AP channels in the AP list.

5.  Interchange Map and Statistic page.

6.  UI Optimization

7.  Security flaw optimization: Update the third party libraries to defend the vulnerability attack.

 

Bug Fixed:

1. Fixed the bug that Omada Controller Linux may fail to self-start with system.

2. Fixed the bug that if the PC modifies the local loopback address (127.0.0.1) or some network interface without MAC address, Controller Linux cannot bind the cloud account and appears General Error.

3. Fixed the bug that Omada Controller may not display normally in IE browser.

4. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser.

5. Fixed the bug that the suffix name of the export file of Trust APs may be wrong when export it on Safari browser.

6. Fixed the bug that 2.4G radio configuration page of Mesh AP may appear channel limit selection option.

7. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

8. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as (!@#$%^&*).

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8.

Data de Publicação: 2018-09-30 Idioma: Inglês Tamanho: 122.11MB
Sistema operativo: Windows 7/8/10/Server

Omada_Controller_V3.0.4_Windows32bit

New Feature/Enhancement:


1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3. Prevent Operator users from viewing Device Account information.

4. Display AP channels in the AP list.

5. Interchange Map and Statistic page.

6. UI Optimization

 

Bug Fixed:

1.  Fixed the bug that Auto Backup can’t take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

2. Fix the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Data de Publicação: 2018-09-30 Idioma: Inglês Tamanho: 126.02MB
Sistema operativo: Windows 7/8/10/Server

Omada_Controller_V3.0.4_Windows64bit

New Feature/Enhancement:


1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3. Prevent Operator users from viewing Device Account information.

4. Display AP channels in the AP list.

5. Interchange Map and Statistic page.

6. UI Optimization

 

Bug Fixed:

1.  Fixed the bug that Auto Backup can’t take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

2. Fix the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Data de Publicação: 2018-09-05 Idioma: Inglês Tamanho: 102.27MB
Sistema operativo: Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1. Support Cloud Access function which allows you to manage Omada Controller remotely conveniently.

2. Support Omada APP management method. (You can manage Omada Controller with Omada APP)

3. Support EAP firmware online upgrade function.

4. Support configuration/data files auto backup function.

5. Improve the Backup & Restore function, backup files can contain configuration only or both configuration and database information in a specific time.

6. Add AP MAC, SSID parameters in the External Web Portal URL which is distributed from controller to client. (When you are using External RADIUS Server Portal function with External Web Portal)

7. Batch Upgrade function now will only take effect to EAP which belong to the current site.

8. UI Optimization. Rearranged the configuration options in Site Settings list (only take effect to current site) or Controller Settings list (take effect to all sites) according to the actual function.

9. Start Omada Controller via jsvc to realize Root Privilege separation function. (For deb installation package, it will create a non-root account called omada to run Omada Controller in default.

10. Change the default port of mongod from 27017 to 27217.

 

 

 

Bug Fixed:

1. Fixed the bug that Omada Controller may not be started successfully if modified the http.connector.port in jetty.properties.

2. Synchronously fixed the bugs of Omada Controller Windows (From 2.5.4 to 3.0.2).

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8.

Data de Publicação: 2018-09-05 Idioma: Inglês Tamanho: 128.47MB
Sistema operativo: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above

New Feature/Enhancement:

1. Support Cloud Access function which allows you to manage Omada Controller remotely conveniently.

2. Support Omada APP management method. (You can manage Omada Controller with Omada APP)

3. Support EAP firmware online upgrade function.

4. Support configuration/data files auto backup function.

5. Improve the Backup & Restore function, backup files can contain configuration only or both configuration and database information in a specific time.

6. Start Omada Controller via jsvc to realize Root Privilege separation function. (For tar.gz installation package, Omada Controller will be operated in root mode. But you can modify the OMADA_USER in bin/control.sh to assign another non-root account to run Omada Controller instead.)

7. Change the default port of mongod from 27017 to 27217.

 

 

 

Bug Fixed:

1. Fixed the bug that Omada Controller may not be started successfully if modified the http.connector.port in jetty.properties.

2. Synchronously fixed the bugs of Omada Controller Windows (From 2.5.4 to 3.0.2).

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8.

Data de Publicação: 2018-08-17 Idioma: Inglês Tamanho: 122.13MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1.Support Cloud Access function which allows you to manage Omada Controller remotely conveniently.

2.Support Omada APP management method. (You can manage Omada Controller with Omada APP)

3.Support EAP firmware online upgrade function.

4.Support configuration/data files auto backup function.

5.Improve the Backup & Restore function, backup files can contain configuration only or both configuration and database information of a specific time.

6.Add AP MAC, SSID parameters in the External Web Portal URL which is distributed from controller to client. (If you are using External RADIUS Server Portal function with External Web Portal)

7.Batch Upgrade function now will only take effect to EAP which belong to the current site.

8.UI Optimization. Rearranged the configuration options in Site Settings list (only take effect to current site) or Controller Settings list (take effect to all sites) according to the actual function.

9.Various known bug fixes.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Data de Publicação: 2018-08-17 Idioma: Inglês Tamanho: 126.04MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1.Support Cloud Access function which allows you to manage Omada Controller remotely conveniently.

2.Support Omada APP management method. (You can manage Omada Controller with Omada APP)

3.Support EAP firmware online upgrade function.

4.Support configuration/data files auto backup function.

5.Improve the Backup & Restore function, backup files can contain configuration only or both configuration and database information of a specific time.

6.Add AP MAC, SSID parameters in the External Web Portal URL which is distributed from controller to client. (If you are using External RADIUS Server Portal function with External Web Portal)

7.Batch Upgrade function now will only take effect to EAP which belong to the current site.

8.UI Optimization. Rearranged the configuration options in Site Settings list (only take effect to current site) or Controller Settings list (take effect to all sites) according to the actual function.

9.Various known bug fixes.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Data de Publicação: 2018-07-24 Idioma: Inglês Tamanho: 117.46MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add support for Mesh networking which allows you to deploy EAP wirelessly.

2. Add support for Fast Roaming (802.11 k/v) which can improve user experience when roaming between the EAPs.

3. Add "Managed by others" status for the EAP managed by other Omada Controller before in Pending list.

4. Add username/password verification when forget and readopt disconnected EAPs.

5. Change the name of EAP Discover Utility to "Omada Discover Utility".

6. Optimize the SSID Override feature in EAP private configuration page.

7. Add icons for sea wave ceiling AP, wall-plate AP and Outdoor AP.

8. Enhance the security of sensitive information like Operator Password, Twilio AuthToken, Radius Password, etc.

 

Bug Fixes:

1. Fix the bug that the database volume grows too fast.

2. Fix the bug that EAP can't be managed immediately after reboot.

3. Fix the bug that the number of wireless clients on the Omada Controller page is inconsistent.

 

Note:

1. To use Omada Controller 2.7.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 2.7.X from 2.4.X or earlier version.

Data de Publicação: 2018-07-24 Idioma: Inglês Tamanho: 121.37MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add support for Mesh networking which allows you to deploy EAP wirelessly.

2. Add support for Fast Roaming (802.11 k/v) which can improve user experience when roaming between the EAPs.

3. Add "Managed by others" status for the EAP managed by other Omada Controller before in Pending list.

4. Add username/password verification when forget and readopt disconnected EAPs.

5. Change the name of EAP Discover Utility to "Omada Discover Utility".

6. Optimize the SSID Override feature in EAP private configuration page.

7. Add icons for sea wave ceiling AP, wall-plate AP and Outdoor AP.

8. Enhance the security of sensitive information like Operator Password, Twilio AuthToken, Radius Password, etc.

 

Bug Fixes:

1. Fix the bug that the database volume grows too fast.

2. Fix the bug that EAP can't be managed immediately after reboot.

3. Fix the bug that the number of wireless clients on the Omada Controller page is inconsistent.

 

Note:

1. To use Omada Controller 2.7.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 2.7.X from 2.4.X or earlier version.

Data de Publicação: 2018-04-13 Idioma: Inglês Tamanho: 104.59MB
Sistema operativo: Windows 7/8/10/Server

New Features/Improvements:

1.Safety performance optimization.

2.Web UI optimization.

3.Optimized the format requirement and handling mechanism for Local User Account importing files.

Bug Fixed:

1.Fixed the bug that clients may lose the authorized status in the next ten minutes, after passing the Facebook Portal authentication.

2.Fixed the bug that customer can add port number except for port 1024~65535, if customer has already added http/https prefix in the URL of Free Authentication Policy.

3.Fixed the bug that Controller will still adopt the EAP, after skipping the Select Devices process in the quick setup wizard of Omada Controller.

Notes:

1. To use Omada Controller 2.6.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 2.6.X from 2.4.X or earlier version.

Data de Publicação: 2018-02-28 Idioma: Inglês Tamanho: 104.73MB
Sistema operativo: Windows 7/8/10/Server

New Features/Improvements:

1. Supports rate limit function for a single client. (If you have set SSID, Client, Voucher rate limit together, the minimum limit value will take effect.)

2. RSSI (Received Signal Strength Indication) of clients will be displayed in the clients list of Omada Controller.

3. Added Historical Data Retention function to clean history and cache files of Omada Controller periodically.

4, Improved the Portal Authentication mechanism. Users who didn’t pass the authentication cannot access local network.

5. HTTPS now supports the redirection of portal authentication page.

6. Facebook Portal now intercepts HTTPS access unless you pass the authentication.

7. Added Daily Limit function to No Authentication portal. After authentication times out, users cannot get authenticated again in one day.

8. Supports single and bulk printing of Voucher code.

9. Omada Controller will create Free Authentication Policy automatically when the External Web Portal Server or External Portal Server is configured.

10. Increased the synchronization update process on Omada Controller when the IP address of EAP is changed.

11. Added error messages that port is already occupied or another Controller is already running in the subnet when starting the Omada Controller.

12. Changed the name of EAP Controller to Omada Controller

Bug Fixed:

1. Added Term of Use function back in portal authentication page.

2. Fix the bug that cannot add Background Picture or Logo Picture in Portal login page when image size is less than 2MB.

3. Fix the bug that the Top-Level Domain of e-mail address cannot exceed 4 English characters.

4. Fix the bug that set Facebook Portal authentication failed when using Firefox browser with private mode and tracking protection function enabled.

5. Fix the bug that cannot login the portal authentication page after changing the default HTTP port (8088) of Omada Controller (you also need to upgrade the corresponding firmware of EAP which fixed this bug).

6. Fix the bug that cannot search the AP name with a blank in the Access Points and Clients list of Omada Controller.

Notes:

1. To use Omada Controller 2.6.x added new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 2.6.X from 2.4.X or earlier version.

Data de Publicação: 2018-02-01 Idioma: Inglês Tamanho: 109.2MB
Sistema operativo: Linux

New Features/Improvements:
1. Add Facebook, SMS and Local User Authentication as Portal Authentication methods.
2. Support for multiple portal policies configured in Omada Controller.
3. Support for more customized portal page, the network administrator can add advertisement on the portal pages now.
4. Add speed and traffic limit based on Voucher.
5. Support for black/white list import.
6. Support configuring DNS on Static IP mode.
7. External Portal URL supports subdirectory, for example https://portal.demo.com/1.
8. Radius password supports special characters.

Notes:

1. To use Omada Controller 2.5.x added new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
3. Portal configuration will be lost after upgraded to Controller 2.5.X from 2.4.X or earlier version.
4. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04, CentOS 6.x/7.x and Fedora 20 or above.
5. Require JRE 1.7 Java environment.

Data de Publicação: 2018-01-05 Idioma: Inglês Tamanho: 113.15MB
Sistema operativo: Windows 7/8/10/Server

New Features/Improvements:
User Interface improvements
Bug Fixed:
1. Fix: COMODO security software will cause Initialization failure of the Omada Controller
2. Fix: Logo picture with transparent background will become black when uploaded in portal login page.

Notes:

1. To use Omada Controller 2.5.x added new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
3. Portal configuration will be lost after upgraded to Controller 2.5.X from 2.4.X or earlier version.

Data de Publicação: 2017-12-07 Idioma: Inglês Tamanho: 109.2MB
Sistema operativo: Windows 7/8/10/Server

New Features/Improvements:
1. Add Facebook, SMS and Local User Authentication as Portal Authentication methods.
2. Support for multiple portal policies configured in Omada Controller.
3. Support for more customized portal page, the network administrator can add advertisement on the portal pages now.
4. Add speed and traffic limit based on Voucher.
5. Support for black/white list import.
6. Support configuring DNS on Static IP mode.
7. External Portal URL supports subdirectory, for example https://portal.demo.com/1.
8. Radius password supports special characters.

Notes:
1. To use Omada Controller 2.5.x added new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
3. Portal configuration will be lost after upgraded to Controller 2.5.X from 2.4.X or earlier version.

EAP Discovery Tool

The EAP Discovery Tool can help the EAP Controller to adopt the EAP in L3 Network, and you can also use the EAP Discovery Tool to find the EAP’s IP address.

Data de Publicação: 2019-06-14 Idioma: Inglês Tamanho: 23.54 MB
Sistema operativo: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11

Bug fixed:

1. Fixed the bug that when the Discovery Utility issues Controller_IP to EAPs which are in factory status, Controller cannot batch manage the EAPs.

2. Fixed the bug that sometimes the Discovery Utility cannot find all EAPs when running in MacOS.

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS(**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC.

Data de Publicação: 2018-07-24 Idioma: Inglês Tamanho: 84.16 MB
Sistema operativo: Mac OS X 10.7/10.8/10.9/10.10/10.11

New Feature/Enhancement:
1. Change name to "Omada Discovery Utility".
2. Update background picture during installation.
3. Limit the maximum length of controller hostname to 79.
 
Bug Fixed:
Fix the bug that searching in the search box will cause the software to hang.
 
Note:
Operating System: Mac OS X 10.7/10.8/10.9/10.10/10.11.

Apps

Omada APP

TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.

Note: To use Omada, please update your EAP's firmware to the latest version.

GPL Code

Emulators

Versão de firmware
Working Mode
Idioma
180411(EU)
-
Inglês
T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code: