Vídeo de Configuração

  • How to set up a TP Link EAP via your mobile phone

    This video demonstrates how to set up a TP-Link EAP via your mobile phone. The setup consists of four steps:
    • Connect the EAP to the network
    • Download the Omada APP
    • Connect to the EAP's wireless network
    • Set up the EAP using the Omada APP

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models. (except EAP120 and EAP220)
    • A small number (1-3) of EAPs.

    Apreender mais

  • How to setup the OC200 via a web browser

    This video will demonstrate how to set up the OC200 via a web browser. The setup consists of six steps:
    • Connect the OC200 to your local network.
    • Get ready for setup.
    • Create a TP-Link ID.
    • Log into your TP-Link ID.
    • Add the OC200 to your TP-Link ID.
    • Follow the wizard to set up the OC200.

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Cloud Controller OC200
    • Mass EAPs (usually more than three)

    Apreender mais

  • How to setup the OC200 via your mobile phone

    This video will demonstrate how to set up the OC200 via your mobile phone. You need to use the Omada APP to complete the setup. The setup consists of six steps:
    • Connect the OC200 to your local network.
    • Get ready for setup.
    • Create a TP-Link ID.
    • Log into your TP-Link ID.
    • Add the OC200 to your TP-Link ID.
    • Follow the wizard to set up the OC200.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Cloud Controller OC200
    • Mass EAPs (usually more than three)

    Apreender mais

  • How to manage TP-Link EAPs centrally from a remote place via a web browser

    You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Controller Software (version 3.0.2 or above)
    • Mass EAPs (usually more than three)

    Apreender mais

  • A Quick Overview of EAP Management Methods

    This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
    Here are 3 most common scenarios and their corresponding methods:
    • Manage 1 or 2 EAPs locally
    • Manage 3 or more EAPs locally
    • Manage 3 or more EAPs remotely
    When choosing the method, consider the following questions:
    1. Standalone Mode or Controller Mode?
    2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
    3. What kind of user interface will you use, a web browser or the Omada app?

    Apreender mais

  • How to Set up a TP-Link EAP via Web browser

    This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
    1. Connect the EAP to the network
    2. Log into the EAP (via a wired/wireless connection)
    3. Change the default SSID
    This video is suitable for users with a small number (1-3) of EAPs .

    Apreender mais

FAQs

Firmware

Atualização de firmware pode resolver problemas da versão de firmware anterior e melhorar o seu desempenho atual.

Para atualizar

IMPORTANTE: Para evitar falhas de atualização, leia o seguinte, antes de prosseguir com o processo de atualização

  • Verifique a versão de hardware do seu dispositivo para a versão de firmware correta. Atualização incorreta de firmware pode danificar o seu dispositivo e anular a garantia. ( Normalmente V1.x = V1)
    NÃO é recomendado atualizar o firmware de outra região. Por favor clique aqui escolher a sua região e efetuar o download da versão de firmware adequado. (O firmware EU (Europa) e US (Estados Unidos) dispõe de versões de hardware diferentes)
  • NÃO desligue a energia durante o processo de atualização, pode causar danos permanentes ao produto.
  • NÃO atualize o firmware através de ligações Wi-Fi, expeto nos casos onde não dispõe de portas rede LAN/Ethernet no dispositivo TP-Link.
  • Recomenda-se que os utilizadores interrompam todos os acessos à Internet ou simplesmente desconectem a ligação à Internet do dispositivo antes de efetuar a atualização.
  • Para extrair o conteúdo com o ficheiro de atualização, recomendamos a utilização de programas de descompressão, como por exemplo, WinZIP, WinRAR ou 7-Zip.
EAP115(EU)_V4_3.3.0 Build 20190301
Data de Publicação: 2019-04-11 Idioma: Inglês Tamanho: 5.70 MB

Recommended Controller Software Version: Omada Controller v3.1.x or above

 

New Feature/Enhancement:

1. Add Radius Accounting to External Radius Server in standalone mode.

2. Add SSID Radius accounting to WPA-Enterprise security mode.

3. Add SSL encryption in Auto Mail of Log Settings.

4. Support the feature of merging 2.4GHz and 5GHz SSID with Controller 3.1.4.

5. Support SSID MAC Authentication to none security mode with Controller 3.1.4.

6. Support channel utilization function with Controller 3.1.4.

7. Support Layer-3 Accessibility in SSH with Controller 3.1.4.

8. Change the rule of the LED when resetting/rebooting EAP.

 

Notes:

1. For EAP115 v4 only.

2. Your device's configuration won't be lost after upgrading.

3. This version of firmware is applied to Omada APP of version 2.1.X or above.

EAP115(EU)_V4_3.2.0 Build 20181211
Data de Publicação: 2018-12-29 Idioma: Inglês Tamanho: 7.12 MB

Recommended Controller Software Version: Omada Controller v3.0.x or above

 

New Feature/Enhancement:

1. Add Band Steering/LED Locate/Client rate limit/SSID rate limit Function in Standalone mode.

2. The SSID isolation function is promoted to the Guest Network Function. Wireless Clients connected with Guest SSID can’t communicate with each other and the local network.

3. Change the HTTP port of Portal authentication page from 80 to 22080 in standalone mode.

4. Add More Client Detail Log in standalone mode.

5. UI optimization.

 

Bug Fixed:

1. Fixed the bug that HTTPS redirection of Portal authentication page will be inoperative when Omada Controller and Omada EAP belong to different subnet.

2. Fixed the bug that we may fail to change the configuration of portal function in standalone mode, if we uncheck Term of Use function in portal configuration page.

3. Fixed the bug that HTTPS redirection of Portal authentication page will be inoperative when the IP address of Omada EAP and wireless clients belong to different subnet.

 

Notes:

1. For EAP115_v4 only.

2. Your device's configuration won't be lost after upgrading.

 

EAP115(EU)_(V4)_3.1.0 Build 20180418
Data de Publicação: 2018-04-28 Idioma: Inglês Tamanho: 7.06 MB

Recommended Controller Software Version:  Omada Controller v 2.6.x or above

 

New Features/Improvements:

1. Management mechanism changing: In standalone mode, only one user is allowed to login the management page of the EAP at the same time.

2. Supports HTTPS redirection of portal authentication page.

3. Facebook Portal now intercepts HTTPS access unless you pass the authentication.

4. Omada Controller will create Free Authentication Policy for the External Web Portal Server   and External Portal Server automatically.

5. Supports rate limit function for a single client. (If you have set SSID, Client, Voucher rate limit at the same time, and the minimum limit value will take effect.)

6. Restricts local resources access of wireless clients which did not pass the authentication.

7. Decreased the synchronization update time of Omada Controller when the IP address of EAP is changed.

8. EAP will report Client RSSI information to Omada Controller.

9. Optimized Rouge AP detection process.

10. Changed the selecting range of auto channel of 2.4G radio to non-overlapping channel 1/6/11

 

Bug Fixed:

1. Fixed the incorrect IP address displaying of some clients in Omada Controller.

2. Fixed the bug that clients may still be able to connect with EAP after blocking the clients in clients list.

3. Fixed the bug that SSID rate limit configuration may not take effect if it is configured when wireless radio is turned off.

 

Notes:

1. For EAP115 (EU)_V4 only.

2. If you managed EAP by Omada Controller, you can’t manage this EAP by Web management page, unless you have reset the EAP.

3. Your device's configuration won't be lost after upgrading.

Utilização de firmware de terceiros em produtos TP-Link

Alguns produtos TP-Link permitem a substituição de firmware oficial por firmware de terceiros (Por exemplo DD-WRT). A TP-Link não se sente obrigada a facultar assistência e suporte e não garante estabilidade nem a performance de firmwares de terceiros. Danos provocados pela utilização de firmwares de terceiros, inviabiliza automaticamente a politica de garantia dos nossos produtos.

Código Open Source para Programadores (GPL)

Nota: Os produtos TP-Link contêm parcialmente código de software desenvolvido por terceiros, incluindo software que foi submetido ao GNU General Public License ("GPL"), Versão 1/Versão 2/Versão 3 ou GNU Lesser General Public License ("LGPL"). Pode utilizar a respetiva condição de software seguindo os termos da licença GPL.

Pode rever, imprimir e efetuar o download dos respetivos termos da licença GPL aqui. Terá acesso ao Código Fonte GPL dos respetivos softwares utilizados nos produtos TP-Link para download e investigação, incluindo a lista de software TP-Link que contêm software GPL ao abrigo do Centro de Código GPL.

Os respetivos programas são distribuídos sem qualquer garantia e suporte. Reveja a licença de GNU - General Public License para mais detalhe.

Controller Software

The EAP Controller is used to manage multiple EAPs intensively.

Data de Publicação: 2019-11-08 Idioma: Inglês Tamanho: 99.4MB
Sistema operativo: Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1. Add “Select Page” feature on voucher management page.

2. Change default status of “Terms of Service” on default portal page to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

Data de Publicação: 2019-11-08 Idioma: Inglês Tamanho: 123.35MB
Sistema operativo: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

New Feature/Enhancement:

1. Add “Select Page” feature on the management page of vouchers.

2. Change the default status of “Terms of Service” to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

Data de Publicação: 2019-11-08 Idioma: Inglês Tamanho: 120.52MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add “Select Page” feature on the voucher management page.

2. Change the default status of “Terms of Service” on default portal page to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

4. You are recommended to create a backup before upgrading, or you will not be permitted to install this version of Omada Controller.

Data de Publicação: 2019-11-08 Idioma: Inglês Tamanho: 124.43MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add “Select Page” feature on the voucher management page.

2. Change the default status of “Terms of Service” on default portal page to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

4. You are recommended to create a backup before upgrading, or you will not be permitted to install this version of Omada Controller.

Data de Publicação: 2019-07-26 Idioma: Inglês Tamanho: 99.23MB
Sistema operativo: Ubuntu 14.04/16.04/17.04/18.04.

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the processing time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

 

Data de Publicação: 2019-07-26 Idioma: Inglês Tamanho: 123.15MB
Sistema operativo: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the processing time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

Data de Publicação: 2019-07-04 Idioma: Inglês Tamanho: 120.29MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the process time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

Data de Publicação: 2019-07-04 Idioma: Inglês Tamanho: 124.2MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the process time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

Data de Publicação: 2019-05-28 Idioma: Inglês Tamanho: 102.8MB
Sistema operativo: Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1. Add RADIUS Accounting.

2. Add Controller migrate and Site migrate.

3. Add log for some of portal authentication results.

4. Support POST request for External Web Portal.

5. Optimize Site Management to allow you to import site.

6. Optimize the performance when batch importing MAC address in MAC Filter.

 

Notes:

1. To use Omada Controller 3.1.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.1.X from 2.4.8.

7. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.X.

Data de Publicação: 2019-05-28 Idioma: Inglês Tamanho: 129.13MB
Sistema operativo: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8

New Feature/Enhancement:

1. Add RADIUS Accounting.

2. Add Controller migrate and Site migrate.

3. Add log for some of portal authentication results.

4. Support POST request for External Web Portal.

5. Optimize Site Management to allow you to import site.

6. Optimize the performance when batch importing MAC address in MAC Filter.

 

Notes:

1. To use Omada Controller 3.1.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.1.X from 2.4.8.

7. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.X.

8. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

Data de Publicação: 2019-05-15 Idioma: Inglês Tamanho: 123.26MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add RADIUS Accounting.

2. Add Controller migrate and Site migrate.

3. Add log for some of portal authentication results.

4. Support POST request for External Web Portal.

5. Optimize Site Management to allow you to import site.

6. Optimize the performance when batch importing MAC address in MAC Filter.

7. Discovery Utility won’t be installed in Controller software installation.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.13.

2. To use Omada Controller 3.1.13 new features, you need to upgrade your EAP's firmware to the corresponding version.

3. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

4. Portal configuration will be lost after upgraded to Omada Controller 3.1.13 from 2.4.X or earlier version.

Data de Publicação: 2019-05-15 Idioma: Inglês Tamanho: 127.16MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add RADIUS Accounting.

2. Add Controller migrate and Site migrate.

3. Add log for some of portal authentication results.

4. Support POST request for External Web Portal.

5. Optimize Site Management to allow you to import site.

6. Optimize the performance when batch importing MAC address in MAC Filter.

7. Discovery Utility won’t be installed in Controller software installation.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.13.

2. To use Omada Controller 3.1.13 new features, you need to upgrade your EAP's firmware to the corresponding version.

3. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

4. Portal configuration will be lost after upgraded to Omada Controller 3.1.13 from 2.4.X or earlier version.

Data de Publicação: 2019-03-25 Idioma: Inglês Tamanho: 102.73MB
Sistema operativo: Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. To use Omada Controller 3.1.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.1.X from 2.4.8.

7. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

8. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

9. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

10. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

11. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

12. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

13. Channel utilization will take effect only with new firmware.

Data de Publicação: 2019-03-25 Idioma: Inglês Tamanho: 129.07MB
Sistema operativo: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. To use Omada Controller 3.1.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.1.X from 2.4.8.

7. This version software needs you to install manually via curl command.

8. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

9. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

10. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

11. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

12. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

13. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

14. Channel utilization will take effect only with new firmware.

 

Data de Publicação: 2019-03-08 Idioma: Inglês Tamanho: 123.6MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

2. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

3. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

4. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

5. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

6. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

7. Channel utilization will take effect only with new firmware.

Data de Publicação: 2019-03-08 Idioma: Inglês Tamanho: 127.5MB
Sistema operativo: Windows 7/8/10/Server

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

2. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

3. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

4. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

5. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

6. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

7. Channel utilization will take effect only with new firmware.

Data de Publicação: 2018-09-30 Idioma: Inglês Tamanho: 122.11MB
Sistema operativo: Windows 7/8/10/Server

Omada_Controller_V3.0.4_Windows32bit

New Feature/Enhancement:


1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3. Prevent Operator users from viewing Device Account information.

4. Display AP channels in the AP list.

5. Interchange Map and Statistic page.

6. UI Optimization

 

Bug Fixed:

1.  Fixed the bug that Auto Backup can’t take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

2. Fix the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Data de Publicação: 2018-09-30 Idioma: Inglês Tamanho: 126.02MB
Sistema operativo: Windows 7/8/10/Server

Omada_Controller_V3.0.4_Windows64bit

New Feature/Enhancement:


1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3. Prevent Operator users from viewing Device Account information.

4. Display AP channels in the AP list.

5. Interchange Map and Statistic page.

6. UI Optimization

 

Bug Fixed:

1.  Fixed the bug that Auto Backup can’t take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

2. Fix the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

EAP Discovery Tool

The EAP Discovery Tool can help the EAP Controller to adopt the EAP in L3 Network, and you can also use the EAP Discovery Tool to find the EAP’s IP address.

Data de Publicação: 2019-08-06 Idioma: Inglês Tamanho: 25.85 MB
Sistema operativo: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11

Bug fixed:

1. Fixed the bug that the Discovery Utility may fail to find EAPs.

2. Fixed the bug that the Cancel button may overlap with the display box after managing APs.

 

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC first.

Data de Publicação: 2019-06-14 Idioma: Inglês Tamanho: 23.54 MB
Sistema operativo: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11

Bug fixed:

1. Fixed the bug that when the Discovery Utility issues Controller_IP to EAPs which are in factory status, Controller cannot batch manage the EAPs.

2. Fixed the bug that sometimes the Discovery Utility cannot find all EAPs when running in MacOS.

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS(**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC.

Data de Publicação: 2018-07-24 Idioma: Inglês Tamanho: 84.16 MB
Sistema operativo: Mac OS X 10.7/10.8/10.9/10.10/10.11

New Feature/Enhancement:
1. Change name to "Omada Discovery Utility".
2. Update background picture during installation.
3. Limit the maximum length of controller hostname to 79.
 
Bug Fixed:
Fix the bug that searching in the search box will cause the software to hang.
 
Note:
Operating System: Mac OS X 10.7/10.8/10.9/10.10/10.11.

Data de Publicação: 2018-01-05 Idioma: Inglês Tamanho: 3.39MB
Sistema operativo: WinXP/Vista/7/8/8.1/10/Server2008/Server2012

Apps

Omada APP

TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.

Note: To use Omada, please update your EAP's firmware to the latest version.

GPL Code

Emulators

Versão de firmware
Working Mode
Idioma
180418(EU)
-
Inglês
T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code: