Business
Search
Business
Search

Scarica per TL-SG2008 V3

Si prega di scegliere la versione hardware:

V3

>Come identificare modello e versione hardware di un prodotto TP-Link?

ATTENZIONE
Modelli e versioni variano a seconda dell'area geografica.
Per prodotti in uso in Italia, utilizzare solo risorse presenti sul sito
http://www.tp-link.it .
È strettamente necessario verificare modello e versione hardware prima di scaricare ed installare ogni firmware.
Product Overview
Documento
Switch Smart Desktop con 8 Porte Gigabit | Jetstream by Omada
TL-SG2008

Feature Filter: Tutto TroubleshootingConfiguration GuideUser Application Requirement

FAQs

Firmware

Un aggiornamento firmware può risolvere problemi, aumentare le performance o introdurre nuove funzionalità.

Come aggiornare

  • È strettamente necessario verificare modello e versione hardware prima di scaricare ed installare ogni firmware.
  • È possibile installare solamente firmware creati per modello e versione hardware in uso.
  • Il caricamento di un firmware non appropriato può danneggiare irrimediabilmente il dispositivo e ne invalida la garanzia.
  • Assicurarsi di non interrompere l’alimentazione del dispositivo e del computer durante l’aggiornamento.
  • I firmware sono scaricabili esclusivamente in formato compresso: è necessario estrarre il firmware aprendo l’archivio compresso tramite un software di decompressione e salvandolo sul desktop.

 

 

TL-SG2008(UN)_V3_20200730
Data di pubblicazione: 2020-09-15 Lingua: English Dimensioni file: 8.44 MB

Notes:
1. First firmware released for TL-SG2008(UN) V3.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
 

Codice Open Source (GPL)

I prodotti TP-LINK contengono software sviluppato da terze parti, incluso software distribuito con licenza GPL (GNU General Public Licence versione 1, 2 o 3) o con licenza LGPL (GNU Lesser General Public License): l'utilizzo di questo software è possibile entro limiti e condizioni stabiliti dalla tipologia di licenza con la quale è distribuito e specificate a questo link. È possibile ottenere il codice sorgente soggetto a GPL e la lista dei prodotti che utilizzano tale codice all'interno del Centro sorgenti GPL.

I relativi software sono distribuiti con formula di TOTALE ESCLUSIONE DI GARANZIA; non sono pertanto garantite COMMERCIABILITÀ e/o IDONEITÀ PER QUALSIASI UTILIZZO SPECIFICO.

Per ulteriori informazioni consultare il testo GNU General Public License.

Controller Software

The EAP Controller is used to manage multiple EAPs intensively.

: 2021-05-07 Lingua: English Dimensioni file: 60.90 MB
: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian.

If you are planning to upgrade from the old controller(v3.2.14 or below) to this version, please read the: Omada Controller Upgrade Guide 

Some new functions of the Controller require device firmware support, and the supporting firmware for routers and switches will be released soon.

 

Supported device models and firmware:

EAP:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD, EAP230-Wall, EAP235-Wall, EAP660 HD, EAP620 HD

Switch:

TL_SG3428MP, TL_SG3428, SG3428X, TL_SG3428XMP, TL-SG3452P, TL-SG3452,

TL-SG3210XHP-M2, TL-SG3210_V3, TL-SX3008F,

TL-SG2428P, TL-SL2428P_V4.2, TL-SG2210MP, TL-SG2210P_V3.20, TL-SG2218,

TL-SG2008P, TL-SG2008

Gateway:

ER605, ER7206

 

New Feature/Enhancement:

1. Add daylight saving time function.

2. Portal supports multiple entries. Local user accounts and voucher codes support binding to different portal entries.

3. Add daily/weekly/monthly limit in Voucher/Local User traffic limit function.

4. Add rate limit templates for SSID and Client rate limit modules.

5. Cancel the site administrator's authority for global configuration, such as controller general and maintenance settings.

For Router:

6. Add IPv6 function.

7. Add L2TP/PPTP interface in the static routing and policy routing function.

8. Add Firewall-State timeout at Settings-Network Security.

9. Add Router Table, Dynamic DNS, VPN Status, Port Forwarding Status in the Insight list.

10. Add ISP Load card and VPNs card in the Dashboard.

For Switch:

11. Add layer-3 function for L2+ switches.

12. Add ethertype value for switch ACL.

13. Add Switch Status in the Insight list.

14. Optimize the configuration logic for Switch STP and loopback detection function.

15. Add PoE utilization card in the Dashboard.

16. Add switch S/N information at Devices-Details-Overview

For EAP:

17. Add AI-Roaming function.

18. Add RADIUS DM function in portal RADIUS authentication.

19. Add dynamic VLAN feature in RADIUS profile.

20. Add OFDMA switch button for AX EAP.

 

Bug Fixed:

1. Fixed the bug that the local user can still access the Internet after re-authenticating, though it has reached the upper traffic limit.

2. Fixed the bug that the PoE scheduler may not take effect.

3. Fixed the bug that the Omada Controller frequently prints roaming logs in the log list.

4. Fixed the bug that the settings of PAP and CHAP authentication mode are inverse in the Controller.

5. Fixed the bug that we may not be able to configure or disable the portal authentication (with general error occurs) sometimes.

6. Fixed the bug that we can’t set VPN servers in different Controller sites in the meantime.

7. Fixed the bug that the SDN Controller does not support spaces character and Nordic script.

8. Fixed the bug that the Controller may not restore the backup file successfully if the backup file is too large (80MB or above).

 

Notes:

1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to an earlier version. 

4. This version of the controller is applied to Omada APP of version 3.0.X or above.

5. Controller needs Java 8 and MongoDB 3.0-3.6 environment for running.

6. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian.

7. You may need to save the backup file and uninstall the old Omada Controller before installing this software.
: 2021-05-07 Lingua: English Dimensioni file: 59.39 MB
: Ubuntu 14.04/16.04/17.04/18.04/Debian

If you are planning to upgrade from the old controller(v3.2.14 or below) to this version, please read the: Omada Controller Upgrade Guide 

Some new functions of the Controller require device firmware support, and the supporting firmware for routers and switches will be released soon.

 

Supported device models and firmware:

EAP:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD, EAP230-Wall, EAP235-Wall, EAP660 HD, EAP620 HD

Switch:

TL_SG3428MP, TL_SG3428, SG3428X, TL_SG3428XMP, TL-SG3452P, TL-SG3452,

TL-SG3210XHP-M2, TL-SG3210_V3, TL-SX3008F,

TL-SG2428P, TL-SL2428P_V4.2, TL-SG2210MP, TL-SG2210P_V3.20, TL-SG2218,

TL-SG2008P, TL-SG2008

Gateway:

ER605, ER7206

 

New Feature/Enhancement:

1. Add daylight saving time function.

2. Portal supports multiple entries. Local user accounts and voucher codes support binding to different portal entries.

3. Add daily/weekly/monthly limit in Voucher/Local User traffic limit function.

4. Add rate limit templates for SSID and Client rate limit modules.

5. Cancel the site administrator's authority for global configuration, such as controller general and maintenance settings.

For Router:

6. Add IPv6 function.

7. Add L2TP/PPTP interface in the static routing and policy routing function.

8. Add Firewall-State timeout at Settings-Network Security.

9. Add Router Table, Dynamic DNS, VPN Status, Port Forwarding Status in the Insight list.

10. Add ISP Load card and VPNs card in the Dashboard.

For Switch:

11. Add layer-3 function for L2+ switches.

12. Add ethertype value for switch ACL.

13. Add Switch Status in the Insight list.

14. Optimize the configuration logic for Switch STP and loopback detection function.

15. Add PoE utilization card in the Dashboard.

16. Add switch S/N information at Devices-Details-Overview

For EAP:

17. Add AI-Roaming function.

18. Add RADIUS DM function in portal RADIUS authentication.

19. Add dynamic VLAN feature in RADIUS profile.

20. Add OFDMA switch button for AX EAP.

 

Bug Fixed:

1. Fixed the bug that the local user can still access the Internet after re-authenticating, though it has reached the upper traffic limit.

2. Fixed the bug that the PoE scheduler may not take effect.

3. Fixed the bug that the Omada Controller frequently prints roaming logs in the log list.

4. Fixed the bug that the settings of PAP and CHAP authentication mode are inverse in the Controller.

5. Fixed the bug that we may not be able to configure or disable the portal authentication (with general error occurs) sometimes.

6. Fixed the bug that we can’t set VPN servers in different Controller sites in the meantime.

7. Fixed the bug that the SDN Controller does not support spaces character and Nordic script.

8. Fixed the bug that the Controller may not restore the backup file successfully if the backup file is too large (80MB or above).

 

Notes:

1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to an earlier version.

4. This version of the controller is applied to Omada APP of version 3.0.X or above.

5. Controller needs Java 8 and MongoDB 3.0-3.6 environment for running.

6. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian.

7. You may need to save the backup file and uninstall the old Omada Controller before installing this software.
: 2021-04-27 Lingua: English Dimensioni file: 91.11 MB

New Omada SDN Firmware
 

Se si prevede di aggiornare dalla vecchia versione (v3.2.14 o precedente) alla versione SDN, leggere attentamente la seguente guida Omada Controller Upgrade Guide contenuta nel pacchetto di installazione prima di aggiornare il controller.

Alcune nuove funzionalità della nuova versione richiedono l'aggiornamento firmware anche dei dispositvi come Access Point, Switch e Gateway.

 

Supported device models and firmware:

EAP:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1

Switch:

TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1, TL-SG3452P_V1, TL-SG3452_V1, TL-SG3428MP_V1, TL-SG3210_V3, TL-SG2218_V1, TL-SL2428P_V4.2

Gateway:

ER605_V1, ER7206_V1

 

New Feature/Enhancement:

1. Add AI-Roaming function.

2. Add daily/weekly/monthly limit in Voucher/Local User traffic limit function.

3. Add layer-3 function for L2+ switches.

4. Add IPv6 function.

5. Add daylight saving time function.

6. Portal supports multiple entries. Local user accounts and voucher codes support binding to different portal entries.

7. Add RADIUS DM function in portal RADIUS authentication.

8. Add dynamic VLAN feature in RADIUS profile.

9. Add rate limit templates for SSID and Client rate limit modules.

10. Add ethertype value for switch ACL.

11. Add Switch Status, Router Table, Dynamic DNS, VPN Status, Port Forwarding Status in the Insight list.

12. Optimize the configuration logic for Switch STP and loopback detection function.

13. Cancel the site administrator's authority for global configuration, such as controller general and maintenance settings.

14. Upgrade the MongoDB database version from 3.4.20 to 3.4.23.

 

Bug Fixed:

1. Fixed the bug that the local user can still access the Internet after re-authenticating, though it has reached the upper traffic limit.

2. Fixed the bug that the PoE scheduler may not take effect.

3. Fixed the bug that the Omada Controller frequently prints roaming logs in the log list.

4. Fixed the bug that the settings of PAP and CHAP authentication mode are inverse in the Controller.

5. Fixed the bug that we may not be able to configure or disable the portal authentication (with general error occurs) sometimes.

6. Fixed the bug that we can’t set VPN servers in different Controller sites in the meantime.

7. Fixed the bug that the SDN Controller does not support spaces character and Nordic script.

8. Fixed the bug that the Controller may not restore the backup file successfully if the backup file is too large (80MB or above).

9. Add L2TP/PPTP Interface in static routing function.

10. Add L2TP/PPTP WAN Interface in policy routing function.

 

Notes:

1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of the Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 

4. This version of the controller is applied to the Omada APP of version 3.0.X or above.

MIBs Files

: 2021-03-24 Lingua: English Dimensioni file: 197.41 KB
: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux
T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code:

Iscriviti alla newsletter TP-Link prende la Privacy seriamente. Per maggiori informazioni sul trattamento dei tuoi dati consulta l'Informativa Privacy.

Seguici

L'azienda
Stampa
Dove Acquistare
Partner Program
Learning Center
Italia / Italiano
Copyright © 2021 TP-Link Corporation Limited. Tutti i diritti riservati.

From United States?

Check products and services for your region.

Go Other Option