Beállítási videó

  • How to manage TP-Link EAPs centrally via the Software Controller

    This video demonstrates how to manage TP-Link EAPs centrally via the Software Controller. The setup consists of three steps:
    • Install the Software
    • Configure Discovery Utility (If your EAPs and the Controller Host are on different subnets)
    • Configure Software Controller

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Software Controller
    • Mass EAPs (usually more than three)

    Learn More

  • How to set up a TP Link EAP via your mobile phone

    This video demonstrates how to set up a TP-Link EAP via your mobile phone. The setup consists of four steps:
    • Connect the EAP to the network
    • Download the Omada APP
    • Connect to the EAP's wireless network
    • Set up the EAP using the Omada APP

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models. (except EAP120 and EAP220)
    • A small number (1-3) of EAPs.

    Learn More

  • How to setup the OC200 via a web browser

    This video will demonstrate how to set up the OC200 via a web browser. The setup consists of six steps:
    • Connect the OC200 to your local network.
    • Get ready for setup.
    • Create a TP-Link ID.
    • Log into your TP-Link ID.
    • Add the OC200 to your TP-Link ID.
    • Follow the wizard to set up the OC200.

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Cloud Controller OC200
    • Mass EAPs (usually more than three)

    Learn More

  • How to setup the OC200 via your mobile phone

    This video will demonstrate how to set up the OC200 via your mobile phone. You need to use the Omada APP to complete the setup. The setup consists of six steps:
    • Connect the OC200 to your local network.
    • Get ready for setup.
    • Create a TP-Link ID.
    • Log into your TP-Link ID.
    • Add the OC200 to your TP-Link ID.
    • Follow the wizard to set up the OC200.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Cloud Controller OC200
    • Mass EAPs (usually more than three)

    Learn More

  • How to manage TP-Link EAPs centrally from a remote place via a web browser

    You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Controller Software (version 3.0.2 or above)
    • Mass EAPs (usually more than three)

    Learn More

  • A Quick Overview of EAP Management Methods

    This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
    Here are 3 most common scenarios and their corresponding methods:
    • Manage 1 or 2 EAPs locally
    • Manage 3 or more EAPs locally
    • Manage 3 or more EAPs remotely
    When choosing the method, consider the following questions:
    1. Standalone Mode or Controller Mode?
    2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
    3. What kind of user interface will you use, a web browser or the Omada app?

    Learn More

  • How to Set up a TP-Link EAP via Web browser

    This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
    1. Connect the EAP to the network
    2. Log into the EAP (via a wired/wireless connection)
    3. Change the default SSID
    This video is suitable for users with a small number (1-3) of EAPs .

    Learn More

GYIK

Firmware

A firmware frissítés megoldást kínál olyan problémákra, amikkel az előző verzió esetleg rendelkezett, ill. egyes funkciók hozzáadását és fejlesztését teszi lehetővé.

Frissítés

FONTOS: A frissítéskor legyen körül tekintő, hogy elkerülje a készülék használhatatlanná válását, és kövesse az alábbi útmutatót a helyes frissítési folyamathoz:

  • Kérjük, ellenőrizze a készülék hardver verzióját a megfelelő firmware verzió eléréséhez. A helytelen firmware frissítés károsíthatja a készüléket, és érvényteleníti a garanciát. (Általában v1.x = V1);
    Nem ajánlatos ezzel a firmware-rel frissíteni olyan készülékez, aminek régió megjelölése eltérő. Kérjük, keresse ki itt az ön régióját a legmegfelelőbb firmware kiválasztásához. (Pl.: az EU és a US megjelölésű firmware-ek eltérnek egymástól)
  • NE kapcsolja ki a készüléket a frissítés ideje alatt, mert ezzel visszafordíthatatlan károsodást okoz.
  • NE frissítse a firmware-t vezeték nélküli (Wi-Fi) kapcsolattal, kivéve ha TP-LINK készülék csak a vezeték nélküli kapcsolattal rendelkezik.
  • Javasolt, hogy a frissítés megkezdése előtt közvetlenül a felhasználó minden, az internet kapcsolatot használó alkalmazást leállítson a számítógépen, vagy egyszerűen húzza ki az internetet szolgáltató kábelt a TP-LINK készülékből.
  • Használjon a frissítéshez letöltött tömörített fájlok kicsomagolásához például WinZip vagy WinRAR szoftvert.
  • A letölthető frissítést tartalmazó tömörített fájlt (jellemzően .zip), valamint kicsomagoláskor a frissítést tartalmazó fájlt (jellemzően .bin) olyan helyre mentse a PC/Laptopon, ahol könnyen megtalálja (javasolt az Asztal/Desktop megadása mint mentési hely, ha lehetséges).
EAP110(EU)_V4_3.20.0 Build 20200525
Kiadás dátuma: 2020-07-07 Nyelv: Angol Fájlméret: 5.37 MB

This firmware is fully adapted Omada SDN platform but only compatible with Omada controller v4.1.5 or above.

If you are using old Omada controller and plan to upgrade firmware for EAP, then you must upgrade Omada controller as well, and please follow Upgrade Guide to upgrade Omada controller.

If your EAP is working standalone, please note that the EAP will be reset after upgrading to this firmware and you need to re-configure your EAP.

 

New Feature/Enhancement:

1. Fully adapt to Omada SDN controller.

The following points 2-8 are effective on Omada SDN controller.

2. Add URL-Filter function.

3. Add IP-Port/IP Profile function.

4. Add 802.11 Rate Control function.

5. Add MAC-Based Authentication function.

6. Support to show association failures statistics on the dashboard interface of Omada SDN controller.

7. Support SNMP V3.

8. Optimize Access Controller function.

9. Support to skip SSID settings during Quick Setup process.

10. Add Layer-3 Accessibility settings for HTTPS and SSH features.

11. Add Cloud-Based Controller Management switch and Controller URL settings.

12. Optimize the performance of connecting multiple clients.

Bug Fixed:

1. Fixed the bug that guest network will not take effect for some IP address of 10.x.x.x.

2. Fixed the bug that client entry will disappear if click the client interface continuously.

3. Fixed the bug that failed to save portal settings if set specific Term of User content.

4. Fixed the bug that failed to pop up portal page if SSID contains ~!@#$%^&*()_+{}:"|<>?/.,;'\[]-=`.

5. Fixed the bug that cannot access the management web if APP is accessing the Radio interface of the EAP.

6. Fixed the bug that failed to access Redirect URL after passing portal authentication.

Notes:

1. For EAP110 v4 only.

2. Your device's configuration will be lost after upgrading and you need to re-configure your devices because some new features are not compatible with the old version. Suggest to back up your configuration before upgrading and please note the new version doesn't support to restore the old configuration file.

3. This version of firmware is applied to Omada APP of version 2.1.X or above.

4. You cannot downgrade if you upgrade from the firmware released in 2018 or earlier to this version directly.

5. This firmware is only compatible with Omada controller v4.1.5 or above. If you are using old Omada controller and plan to upgrade firmware for EAP, you must upgrade Omada controller as well, and please follow Omada Controller Upgrade Guide to upgrade Omada controller.

EAP110(EU)_V4_3.5.0 Build 20200113
Kiadás dátuma: 2020-03-04 Nyelv: Angol Fájlméret: 5.91 MB

Recommended Controller Software Version: Omada Controller v3.2.6 or above

 

New Feature/Enhancement:

1. Change the mechanism that the IP configuration in Standalone mode will be retained after the EAP is adopted by the Controller.

2. Add anti-brute force cracking mechanism that you cannot login to the EAP via SSH or webserver in two hours if you fail to login up to 30 times in half an hour.

3. Optimize NTP server to support domain name.

4. Change the “Term of Service” of portal settings page in standalone mode as unchecked by default.

5. Optimize the UI of SSID and Free Authentication Policy in Standalone mode.

6. Optimize the DNS resolution process of EAP to avoid parsing wrong IP.

7. Reduce the time interval to 5s and limit the size to 2k bytes of the More Client Detail Log in Log Settings.

8. Change the OpenSSL version to 1.0.2q.

9. Optimize UI, including character optimization and display error correction.

10. Update the time zone of Caracas from GMT-4:30 to GMT-4:00.

 

Bug Fixed:

1. Fixed the bug that client devices can pass the portal authentication after disconnected from the Controller.

2. Fixed the bug that untagged packets can be transferred to SSIDs with different VLANs.

3. Fixed the bug that packets with VLAN tag can be forwarded to the SSID without wireless VLAN setting.

4. Fixed the bug that External Radius Server portal page may not pop up in some clients.

5. Fixed the bug that when adding an SSID with no password and change the encryption mode to WPA on Omada APP, the clients can still connect to the SSID without password.

6. Fixed the bug that the management page may not be accessed after EAP is disconnected from the Controller.

7. Fixed the bug that when APs are disconnected from Controller, the rate limit configuration will be not issued to these APs after they are back to connected again.

8. Fixed the bug that the EAP may hang after clicking save in wireless VLAN page in Standalone mode.

9. Fixed the bug that the EAP may hang if scanning rogue AP in high frequency.

10. Fixed the bug that when the time of EAP is synchronized with PC, it will be the same as PC’s time not considering different time zones.

 

Notes:

1. For EAP110 v4 only.

2. Your device's configuration won't be lost after upgrading.

3. This version of firmware is applied to Omada APP of version 2.1.X or above.

4. You cannot downgrade if you upgrade from the firmware released in 2018 or earlier to this version directly.

EAP110(EU)_V4_3.4.0 Build 20191014
Kiadás dátuma: 2020-01-14 Nyelv: Angol Fájlméret: 5.70 MB

Recommended Controller Software Version: Omada Controller v3.2.x or above

Bug Fixed:
1. Fixed the bug that the CPU usage of EAP may be high when EAPs are deployed densely.
2. Fixed the bug that EAP may disconnect from Omada Controller when EAPs are deployed densely. 

Notes:
1. For EAP110 v4 only.
2. Your device's configuration won't be lost after upgrading.
3. This version of firmware is applied to Omada APP of version 2.1.X or above.

4. You cannot downgrade if you upgrade from 2018 or older firmware to this version directly.

Harmadik fél által fejlesztett firmware használata TP-Link termékkel

Néhány hivatalos TP-Link termék firmware-e helyettesíthető harmadik fél által fejlesztett firmware verzióval, mint pl.: DD-WRT. Ilyen esetekben a TP-Link nem nyújt támogatást a készülékhez, és annak használata nem garantálja a teljesítményt és a stabil működést. A harmadik fél által készített firmware okozta készülékkárosodásért a TP-Link nem vállal felelősséget, és a készülékre vonatkozó garancia teljes elvesztésével jár. Kérjük, ezeket a firmware verziókat a fentiek figyelembe vételével, és csak is saját felelősségre használja!

Nyílt forráskód programozóknal (GPL)

Az alábbi információk a programozóknak szól, a legtöbb otthoni felhasználót nem érinti.

A TP-LINK termékek részben tartalmaznak harmadik fél által fejlesztett szoftverkódot, beleértve a GNU General Public License ("GPL"), 1-es verzió/2-es verzió/3-as verzió vagy GNU General Public License ("LGPL") alátartozó szoftvert kódokat.

A megfelelő GPL licenc feltételeket megnézheti, kinyomtathatja és letöltheti innen.Ezzel a TP-LINK egy ingyenesen letölthető példányt biztosít a megfelelő szoftver forráskóddal az adott a TP-LINK termékhez, valamint információt, hogy mely termékek rendelkeznek GPL szoftverkóddal, amit a GPL Code Center alatt is megtekinthet.

A vonatkozó programok GARANCIA NÉLKÜL kerülnek terjesztésre; a felhasználó saját felelősségre használhatja azokat, a ROSSZ FELHASZNÁLÁSBÓL eredő károkért a TP-LINK nem vállal felelősséget. Tekintse meg a vonatkozó GNU General Public License további részleteit.

Vezérlőprogram

The EAP Controller is used to manage multiple EAPs intensively.

Kiadás dátuma: 2020-11-10 Nyelv: Angol Fájlméret: 59.89 MB
Operációs rendszer: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Fedora 20 (or above) and Debian 8/9

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide before upgrading the controller.

 

Supported device models and firmware:

EAP:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1

Switch:

TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1

Gateway:

TL-R605_V1, TL-ER7206_V1

 

New Feature/Enhancement:

1. Support to import the SSL certificate of PFX format. 

2. Support to create of up to 1000 sites.

3. Support arbitrary adjustment of logo display and closing logo.

4. Support to paste the IP address for everywhere there is IP setting.

5. Support to restore the site privilege setting for cloud users when backup and restore for the same controller.

6. Support to print all unused voucher codes. 

7. Support to delete the archived alert log and event log.

8. Support to export device list, client list, etc. in Export Data function. 

9. Support to drag and drop card adjust the dashboard display.

10. Add the Hostname/IP setting which will be used for the controller URL in the notification email.

11. Add Past Connection page in the Insight menu.

12. Improve the MAP topology display.  

 

Bug Fixed:

1. Fixed the bug that the Limited Online Users voucher code still can be used after expired.

2. Fixed the bug that cannot use the website subpath in The Promotional URL settings of portal function.

3. Fixed the bug that cannot import the picture in MAP and Portal settings if access controller with cloud access.

4. Fixed the bug that the cutout logo will show a black background.

5. Fixed the bug that auto backup and schedule function cannot work if the time zone uses summertime.

 

Notes:

1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to an earlier version. 

4. This version of the controller is applied to Omada APP of version 3.0.X or above.

5. Controller needs Java 8 and MongoDB 3.0-3.6 for running. And there are no built-in JRE and MongoDB, so you need to install them by yourself.

 

Kiadás dátuma: 2020-11-03 Nyelv: Angol Fájlméret: 90.09 MB
Operációs rendszer: Win2000/XP/2003/Vista/7/8/8.1/10

 

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

 

Supported device models and firmware:

EAP:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1

Switch:

TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1

Gateway:

TL-R605_V1, TL-ER7206_V1

 

New Feature/Enhancement:

1. Support to import the SSL certificate of PFX format. 

2. Support to create of up to 1000 sites.

3. Support arbitrary adjustment of logo display and closing logo.

4. Support to paste the IP address for everywhere there is IP setting.

5. Support to restore the site privilege setting for cloud users when backup and restore for the same controller.

6. Support to print all unused voucher codes. 

7. Support to delete the archived alert log and event log.

8. Support to export device list, client list, etc. in Export Data function. 

9. Support to drag and drop card adjust the dashboard display.

10. Add the Hostname/IP setting which will be used for the controller URL in the notification email.

11. Add Past Connection page in the Insight menu.

12. Improve the MAP topology display.  

 

Bug Fixed:

1. Fixed the bug that the Limited Online Users voucher code still can be used after expired.

2. Fixed the bug that cannot use the website subpath in The Promotional URL settings of portal function.

3. Fixed the bug that cannot import the picture in MAP and Portal settings if access controller with cloud access.

4. Fixed the bug that the cutout logo will show a black background.

5. Fixed the bug that auto backup and schedule function cannot work if the time zone uses summertime.

 

Notes:

1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 

4. This version of the controller is applied to Omada APP of version 3.0.X or above.

Kiadás dátuma: 2020-07-13 Nyelv: Angol Fájlméret: 55.11 MB
Operációs rendszer: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

If you are planning to upgrade from the old controller to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

 

Supported device models and firmware:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1

EAP230-Wall_V1

EAP235-Wall_V1

 

New Feature/Enhancement:

1. Omada SDN software controller provides a unified approach to configuring enterprise networks comprised of routers, switches, and wireless access points.

2. Brand new UI and style to provide high-efficiency, rapid and comprehensive network settings and maintenance function.

 

3. Add brand new Dashboard interface to monitor network operation in real time.

4. Add Statistics interface to monitor devices and show the statistics of network operation data.

5. Add Topology interface to generate the network topology automatically.

6. Add Insight interface to view the detailed network history data.

7. Add Logs interface that supports 100+ types of logs and custom warning level of logs.

8. Support to configure for gateway, including Internet, LAN Network, ACL, URL Filtering, VPN, Routing, NAT, Session Limit, Bandwidth Control, Portal and so on.

9. Support to configure for switch, including 802.1Q VLAN, ACL, 802.1x, IGMP Snooping, STP and so on.

10. Add Reboot Schedule and PoE Schedule and support to set different schedules for each device.

 

Notes:

1. Omada SDN Controller can configure and manage only the certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

4. This version of controller is applied to Omada APP of version 3.0.X or above.

5. Controller needs Java 8 and MongoDB 3.0.15-3.6.18 for running. And there are no built-in JRE and MongoDB, so you need to install them by yourself.

Kiadás dátuma: 2020-07-13 Nyelv: Angol Fájlméret: 56.54 MB
Operációs rendszer: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

If you are planning to upgrade from the old controller to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

 

Supported device models and firmware:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1

EAP230-Wall_V1

EAP235-Wall_V1

 

New Feature/Enhancement:

1. Omada SDN software controller provides a unified approach to configuring enterprise networks comprised of routers, switches, and wireless access points.

2. Brand new UI and style to provide high-efficiency, rapid and comprehensive network settings and maintenance function.

 

3. Add brand new Dashboard interface to monitor network operation in real time.

4. Add Statistics interface to monitor devices and show the statistics of network operation data.

5. Add Topology interface to generate the network topology automatically.

6. Add Insight interface to view the detailed network history data.

7. Add Logs interface that supports 100+ types of logs and custom warning level of logs.

8. Support to configure for gateway, including Internet, LAN Network, ACL, URL Filtering, VPN, Routing, NAT, Session Limit, Bandwidth Control, Portal and so on.

9. Support to configure for switch, including 802.1Q VLAN, ACL, 802.1x, IGMP Snooping, STP and so on.

10. Add Reboot Schedule and PoE Schedule and support to set different schedules for each device.

 

Notes:

1. Omada SDN Controller can configure and manage only the certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

4. This version of controller is applied to Omada APP of version 3.0.X or above.

5. Controller needs Java 8 and MongoDB 3.0.15-3.6.18 for running. And there are no built-in JRE and MongoDB, so you need to install them by yourself.

Kiadás dátuma: 2020-07-06 Nyelv: Angol Fájlméret: 86.72 MB
Operációs rendszer: Windows 7/8/10/Server

If you are planning to upgrade from the old controller to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

 

Supported device models and firmware:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1

EAP230-Wall_V1

EAP235-Wall_V1

 

New Feature/Enhancement:

1. Omada SDN software controller provides a unified approach to configuring enterprise networks comprised of routers, switches, and wireless access points.

2. Brand new UI and style to provide high-efficiency, rapid and comprehensive network settings and maintenance function.

3. Add brand new Dashboard interface to monitor network operation in real time.

4. Add Statistics interface to monitor devices and show the statistics of network operation data.

5. Add Topology interface to generate the network topology automatically.

6. Add Insight interface to view the detailed network history data.

7. Add Logs interface that supports 100+ types of logs and custom warning level of logs.

8. Support to configure for gateway, including Internet, LAN Network, ACL, URL Filtering, VPN, Routing, NAT, Session Limit, Bandwidth Control, Portal and so on.

9. Support to configure for switch, including 802.1Q VLAN, ACL, 802.1x, IGMP Snooping, STP and so on.

10. Add Reboot Schedule and PoE Schedule and support to set different schedules for each device.

 

Notes:

1. Omada SDN Controller can configure and manage only the certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

4. This version of controller is applied to Omada APP of version 3.0.X or above.

Kiadás dátuma: 2020-04-20 Nyelv: Angol Fájlméret: 120.54MB
Operációs rendszer: Windows 7/8/10/Server

New Feature/Enhancement:

1. Added the feature that the system logs can be exported.

2. Changed the priority that non-administrator role cannot change the history data retention settings.

3. Optimized the UI of Statistics in Omada Controller.

 

Bug Fixed:

1. Fixed the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters.

2. Fixed the bug that the Cloud Access cannot be displayed normally in the low version of Firefox.

3. Fixed the bug that Omada Controller allow any user to read the files of controller.

4. Fixed the bug that controller will report an error when Top Usage data is empty.

 

Notes:

1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.

Kiadás dátuma: 2020-04-20 Nyelv: Angol Fájlméret: 124.46MB
Operációs rendszer: Windows 7/8/10/Server

New Feature/Enhancement:

1. Added the feature that the system logs can be exported.

2. Changed the priority that non-administrator role cannot change the history data retention settings.

3. Optimized the UI of Statistics in Omada Controller.

 

Bug Fixed:

1. Fixed the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters.

2. Fixed the bug that the Cloud Access cannot be displayed normally in the low version of Firefox.

3. Fixed the bug that Omada Controller allow any user to read the files of controller.

4. Fixed the bug that controller will report an error when Top Usage data is empty.

 

Notes:

1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.

Kiadás dátuma: 2020-04-20 Nyelv: Angol Fájlméret: 99.4MB
Operációs rendszer: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

Bug Fixed:

1. Fixed the bug that Omada Controller allow any user to read the files of controller.

2. Fixed the bug that controller will report an error when Top Usage data is empty. 

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

Kiadás dátuma: 2020-04-20 Nyelv: Angol Fájlméret: 125.64MB
Operációs rendszer: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

Bug Fixed:

1. Fixed the bug that Omada Controller allow any user to read the files of controller.

2. Fixed the bug that controller will report an error when Top Usage data is empty. 

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

Kiadás dátuma: 2020-04-09 Nyelv: Angol Fájlméret: 99.39MB
Operációs rendszer: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

New Feature/Enhancement:

1. Add the feature that the system logs can be exported.

2. Change the priority that non-administrator role cannot change the history data retention settings.

3. Optimize the UI of Statistics in Omada Controller.

 

Bug Fixed:

1. Fix the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters.

2. Fix the bug that the Cloud Access cannot be displayed normally in the low version of Firefox.

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

Kiadás dátuma: 2020-04-09 Nyelv: Angol Fájlméret: 123.36MB
Operációs rendszer: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

New Feature/Enhancement:

1. Add the feature that the system logs can be exported.

2. Change the priority that non-administrator role cannot change the history data retention settings.

3. Optimize the UI of Statistics in Omada Controller.

 

Bug Fixed:

1. Fix the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters.

2. Fix the bug that the Cloud Access cannot be displayed normally in the low version of Firefox.

 

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

Kiadás dátuma: 2019-11-08 Nyelv: Angol Fájlméret: 99.4MB
Operációs rendszer: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

New Feature/Enhancement:

1. Add “Select Page” feature on voucher management page.

2. Change default status of “Terms of Service” on default portal page to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

Kiadás dátuma: 2019-11-08 Nyelv: Angol Fájlméret: 123.35MB
Operációs rendszer: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

New Feature/Enhancement:

1. Add “Select Page” feature on the management page of vouchers.

2. Change the default status of “Terms of Service” to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

Kiadás dátuma: 2019-11-08 Nyelv: Angol Fájlméret: 120.52MB
Operációs rendszer: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add “Select Page” feature on the voucher management page.

2. Change the default status of “Terms of Service” on default portal page to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

4. You are recommended to create a backup before upgrading, or you will not be permitted to install this version of Omada Controller.

Kiadás dátuma: 2019-11-08 Nyelv: Angol Fájlméret: 124.43MB
Operációs rendszer: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add “Select Page” feature on the voucher management page.

2. Change the default status of “Terms of Service” on default portal page to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

4. You are recommended to create a backup before upgrading, or you will not be permitted to install this version of Omada Controller.

Kiadás dátuma: 2019-07-04 Nyelv: Angol Fájlméret: 120.29MB
Operációs rendszer: Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the process time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

Kiadás dátuma: 2019-07-04 Nyelv: Angol Fájlméret: 124.2MB
Operációs rendszer: Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the process time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

Kiadás dátuma: 2019-03-08 Nyelv: Angol Fájlméret: 123.6MB
Operációs rendszer: Windows 7/8/10/Server

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

2. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

3. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

4. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

5. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

6. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

7. Channel utilization will take effect only with new firmware.

Kiadás dátuma: 2019-03-08 Nyelv: Angol Fájlméret: 127.5MB
Operációs rendszer: Windows 7/8/10/Server

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

2. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

3. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

4. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

5. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

6. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

7. Channel utilization will take effect only with new firmware.

EAP felderítő

The EAP Discovery Tool can help the EAP Controller to adopt the EAP in L3 Network, and you can also use the EAP Discovery Tool to find the EAP’s IP address.

Kiadás dátuma: 2020-11-09 Nyelv: Angol Fájlméret: 33.16 MB
Operációs rendszer: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

New Feature/Enhancement:

1. Support to discover the gateway and switch that support Omada SDN platform.

2. Add timeout mechanism during adopting the devices.

 

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC first.

4. Omada Controller and Discover Utility cannot run on the same computer at the same time.

Kiadás dátuma: 2020-07-07 Nyelv: Angol Fájlméret: 31.11 MB
Operációs rendszer: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11

New Feature/Enhancement:

1. Fully adapted to Omada SDN Controller v4.1.4.

2. Support to discover the gateway and switch that support Omada SDN platform.

 

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC first.

4. Omada Controller and Discover Utility cannot run on the same computer at the same time.

Kiadás dátuma: 2019-06-14 Nyelv: Angol Fájlméret: 23.54 MB
Operációs rendszer: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11

Bug fixed:

1. Fixed the bug that when the Discovery Utility issues Controller_IP to EAPs which are in factory status, Controller cannot batch manage the EAPs.

2. Fixed the bug that sometimes the Discovery Utility cannot find all EAPs when running in MacOS.

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS(**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC.

Kiadás dátuma: 2018-07-24 Nyelv: Angol Fájlméret: 84.16 MB
Operációs rendszer: Mac OS X 10.7/10.8/10.9/10.10/10.11

New Feature/Enhancement:
1. Change name to "Omada Discovery Utility".
2. Update background picture during installation.
3. Limit the maximum length of controller hostname to 79.
 
Bug Fixed:
Fix the bug that searching in the search box will cause the software to hang.
 
Note:
Operating System: Mac OS X 10.7/10.8/10.9/10.10/10.11.

Alkalmazás

Omada APP

TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.

Note: To use Omada, please update your EAP's firmware to the latest version.

T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code:

Feliratkozás a hírlevélreA TP-Link komolyan veszi az adatok védelmét. További információért látogassa meg a TP-Link Adatvédelmi irányelvek oldalt..

From United States (English)?

Check products and services for your region.