300Mbps AV600 Wi-Fi Powerline Extender Starter Kit
- One Touch Super Range Extension - Wi-Fi Clone Button simplifies your Wi-Fi configuration and helps build a seamless unified home network
- HomePlug AV standard providing up to 600Mbps1 high speed data transmission over a home’s existing electrical wiring, ideal for lag-free HD or 3D video streaming and online gaming
- Extend 300Mbps wireless connections to previously hard-to-reach areas of your home and office
Wired or Wireless? Why not Both!
Internet Goes Further
with Your Home's Electricity System
300Mbps AV600 Wi-Fi Powerline
Extender Starter Kit
Extend Wired and Wireless Network to Any Room Using Existing Powerline
Based on the Powerline technology, your network extension is never limited to the primary coverage of your router. With advanced HomePlug AV600, the TL-WPA4220 KIT transforms your home’s existing electrical circuit into a high-speed network with no need for new wires or drilling and brings wired and wireless network to anywhere there is a power outlet.
AV600 Speeds and 300 Meters Range
Using advanced HomePlug AV technology, TL-WPA4220 KIT provides stable and high-speed data transmissions of up to 600 Mbps* for ranges up to 300 meters where there is a power outlet. No interference on electrical or electronic equipment. Stream in HD, game online and download large files without interruption thanks to reliable powerline links.
Up to 300 Meters
*Listed HomePlug AV speed refers to the theoretical maximum physical-layer data transfer rate. Actual data speeds vary and are limited by the product’s Ethernet port and other network conditions such as data traffic, electrical noise, and wiring issues.
Plug and Play with No Configuration Required
Ditch the complicated setup process for good. Get started with powerline in just two steps :
- Step1 : connect TL-PA4010 to your router.
- Step2 : plug in TL-WPA4220 wherever you need wired and wireless internet service.
Pair for more security
Press the “Pair” button on each adapter to create a more secure network.
Wi-Fi Auto-Sync for Unified Wi-Fi Network
Wi-Fi Auto-Sync creates a simple, intuitive powerline experience. Pressing the Wi-Fi Clone button instantly copies your network name and password from your router for easy setup. Wi-Fi Move automatically applies any settings changes across the network. Your existing Wi-Fi settings will be synchronized to the new extender automatically.
Two Ethernet Ports for Wired Connections
With two Ethernet ports, the TL-WPA4220 Kit can run multiple high-speed and reliable wired connections at the same time for devices like smart TVs, PCs, and game consoles. Two Ethernet cables are included in the box.
Powerline Management on Your Smartphone
The tpPLC Utility and tpPLC app make it easy to control wireless network settings, set schedules for Wi-Fi availability and even control the LED indicators on your adapters from any iOS or Android device. You can download the tpPLC app for iOS and Android devices. You can download the intuitive new tpPLC Utility for your PC at www.tp-link.com/en.
|Plug Type||EU, UK, US, AR|
|Standards and Protocols||HomePlug AV, IEEE802.3, IEEE802.3u, IEEE802.11b/g/n|
|Interface||2*10/100Mbps Ethernet Port|
|Button||Pair, Reset, Wi-Fi/Wi-Fi Clone|
|Power Consumption||Maximum: 7.608W (220V/50Hz)
Typical: 7.216W (220V/50Hz)
Standby: 4.610W (220V/50Hz)
|LED Indicator||PWR, PLC, ETH, Wi-Fi/Wi-Fi Clone|
|Dimensions ( W x D x H )||3.7 x 2.1 x 1.6 in. (94×54×40mm)|
|Range||300 Meters over electrical circuit|
|Signal Rate||11n: Up to 300Mbps(dynamic)
11g: Up to 54Mbps(dynamic)
11b: Up to 11Mbps(dynamic)
|Reception Sensitivity||270M: -68dBm@10% PER
130M: -68dBm@10% PER
108M: -68dBm@10% PER
54M: -68dBm@10% PER
11M: -85dBm@8% PER
6M: -88dBm@10% PER
1M: -90dBm@8% PER
|Wireless Security||64/128-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK|
|Advanced Functions||Enable/DisableWireless Radio,WMM, Wireless Statistics|
|Modulation Technology||OFDM (PLC)|
WEP, WPA/WPA2, WPA-PSK/WPA2-PSK Encryption
|Certification||CE, FCC, RoHS|
|Package Contents||Powerline Ethernet Adapter TL-WPA4220 & TL-PA4010
6.5 ft. (2 m) Ethernet cable (RJ45)
Quick Installation Guide
|System Requirements||Windows 2000/XP/2003/Vista, Windows 7/8, Mac, Linux|
|Environment||Operating Temperature: 0°C~40°C (32°F ~104°F)
Storage Temperature: -40°C~70°C (-40°F ~158°F)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
*1. The theoretical maximum channel data transfer rate is derived from HomePlug AV specifications. Actual data transfer rate will vary from network environment including: distance, network traffic, noise on electrical wires, building material and construction, quality of electrical installation and other adverse conditions.
*2. Compatible with all HomePlug AV and AV2 Standard Powerline adapters. This product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or are non-standard or outdated.
*3. Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection, quality, and client condition.