TP-Link, Reliably Smart
How to add a device to the network using tpPLC Utility (new logo)?
Configuration Guide
Updated 09-06-2019 07:56:04 AM
This Article Applies to:
TL-WPA8635P KIT( V2 ) , TL-WPA4227KIT( V1 ) , TL-PA411KIT( V3 V4 ) , TL-PA8015P KIT , TL-WPA4226T KIT , TL-WPA8635P( V2 ) , TL-WPA4230P KIT , TL-PA7017 KIT , TL-PA4010P KIT , TL-PA711 KIT( V3 ) , TL-WPA4221 KIT , TL-PA4015PKIT , TL-PA7020P KIT(FR) , TL-WPA4530 KIT , TL-PA8010P , TL-PA7010P KIT(FR) , TL-WPA8630 KIT(FR)( V1 V2 ) , TL-WPA4220KIT , TL-WPA8630P( V2 V2.10 ) , TL-WPA4220T KIT , TL-WPA8630 KIT , TL-WPA9610 KIT , TL-PA7010 KIT , TL-WPA8730 KIT , TL-WPA4225 KIT , TL-WPA8630P KIT , TL-PA7010P KIT , TL-PA4010P TKIT , TL-PA9020 KIT , TL-PA9025P , TL-PA8035P KIT , TL-PA4010 KIT , TL-PA8035P , TL-PA4010 , TL-PA4022P KIT( V3 ) , TL-PA4020P KIT , TL-PA9020P KIT , TL-PA8033P KIT( V2 ) , TL-WPA4220 KIT , TL-PA7020 KIT , TL-PA7020P KIT , TL-PA8010P KIT , TL-PA9025P KIT , TL-PA4016P KIT , TL-PA4025P KIT , TL-PA4020PT KIT , TL-PA4015PT KIT , TL-PA8030P KIT , TL-WPA4220 , TL-WPA4226KIT , TL-PA8010 KIT , TL-PA4015P
To add a device to the current network, follow the steps below:
1. Write down the 16-digit powerline key printed on the device label.
2. Plug the device into a wall socket and wait until its LEDs become stable.
3. Open the utility, and click Add Device on the left column.
Please note: If the Utility hasn’t been installed yet, please refer to How to prepare for using the tpPLC Utility (new logo)?
4. On the Add a New Device page, enter the powerline key you wrote down, and click Save.
Now the new device will appear on the utility.
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
Is this faq useful?
Your feedback helps improve this site.
Your feedback helps improve this site.
Any other feedback?
How can we improve it?
- About Us
- Press
Copyright © 2019 TP-Link Technologies Co., Ltd. All rights reserved.