How to install TD-W8950N(D) , TD-W8960N(D/B), TD-8810/8840, TD-W8910G/8920G, TD-W8968 V3 to work with IPoA or Static IP

User Application Requirement
Mis à jour06-29-2022 01:51:58 AM 53682
Ce document concerne les modèles suivants : 

Note: For the configuration, you should know the IP parameters, connection type, VPI/VCI number. If you are not sure about the information, contact your ISP to double check it first.

Step 1
Open the web browser and type the IP address of the device in the address bar (default is http://192.168.1.1, you can check it on the bottom label of the device). Then press Enter.
Step 2
Input username and password in the login page, the default username and password both are admin, click OK to login the web page.
Step 3
Click on Quick Setup on the left side.
Step 4
Input the correct VPI and VCI value (provided by your ISP). Click on Next .
Step 5
Select IP over ATM(IPoA), and then click on Next.
Step 6
Enter WAN IP address, WAN subnet mask, Default Gateway and DNS Server, and then go to next.
All the information in this page is very important and can´t be incorrect. If you are not sure, please call your ISP to have a check.
Step 7
Click on Next.
Step 8
If your ADSL2+ modem router does not support wireless function, you can skip this step.
If you want to connect to it via wireless,select Enable Wireless and set up your wireless network:
SSID: Create your wireless network name.
Wireless Security: Choose Disable Security to leave it unsecured or WPA-PSK/WPA2-PSK to secure your wireless network and create yourpassword in the Network Key box.
Step 9
Click Save/Reboot to save the settings and restart the router.

Est-ce que ce FAQ a été utile ?

Vos commentaires nous aideront à améliorer ce site.

Produits Recommandés

De United States?

Infos produits, événements, services pour votre pays.