Descarga para XX230v V1

IMPORTANTE : La disponibilidad de modelos y versiones de hardware varía según la región. Consulta el sitio web regional de TP-Link para determinar la disponibilidad del producto.
Visión General
Manual

Utilidad

AginetConfig 3.0.2

Descarga
Fecha de Publicación: 2023-05-01 Idioma: Inglés Tamaño de Archivo: 127.79 MB
Sistema Operativo: Windows/Mac OS/Linux
  • Aplicación para aplicar configuración por lotes en dispositivos Aginet.

Agile Config 2.0

Descarga
Fecha de Publicación: 2022-01-01 Idioma: Inglés Tamaño de Archivo: 5.47 MB
Sistema Operativo: Windows/Mac OS/Linux
  • Aplicación para aplicar configuración por lotes en dispositivos Aginet.

Software de gestión de red

XX230v_DataModel

Descarga
Fecha de Publicación: 2023-10-12 Idioma: Inglés Tamaño de Archivo: 99.61 KB
Sistema Operativo: ACS
  • Plantilla TR-069/TR-098 (ACS) compatibles con genieACS u otros sistemas de aprovisionamiento.

  • Plantilla de configuración de OLT

  • DataModel XML

Vídeo de configuración

  • Configurar ONT en OLT Huawei

    Como dar de alta una ONT de TP-Link en una OLT marca Huawei

    Más Carpeta
  • Autoconfiguración de dispositivos mediante la Opción 66 del DHCP Agile Config 2 0

Preguntas Frecuentes

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. 
    Cómo encontrar la versión de hardware en un dispositivo de TP-Link
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

XX230vv1_0.3.0 3.0.0 v6066.0 Build 240403 Rel.32510n

Descarga
Fecha de Publicación: 2024-04-30 Idioma: Inglés Tamaño de Archivo: 26.64 MB

SOLO COMPATIBLE CON MODELO XX230v (ES),
Si tu dispostivo es XX230v (EU), deberas primero actualizar con el FW(trans) para convertir tu unidad de EU a ES, despues podras actualizar a esta version. Por favor contacta con el Soport Tecnico.

Release Notes:

1.- Interface WAN por defecto modificada a VLAN 20
2.- TR-069, Nodo: InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.Line.1.SIP.URI , permite enviar valor “null” para eliminar la configuración de VoIP.
3.- Cuando el dispositivo se configura como Router (ETH4), el LED PON se desactiva.
4.- Se añade informacion del numero de serie en Advanced > System Tools > Firmware Upgrade
5.- Se corrige un problema detectado con algunos Televisores antiguos con tarjeta 2.4Ghz que provocaban un error en el servidor DHCP.
6.- Se corrige un problema detectado de compatibilidad con OLT DS-P7001

Homologación en red de Adamo Wholesale.

XX230vv1_0.1.0 3.0.0 v6066.0 Build 231010 Rel.18434n

Descarga
Fecha de Publicación: 2023-10-10 Idioma: Multilingüe Tamaño de Archivo: 26.64 MB

SOLO COMPATIBLE CON MODELO XX230v (ES),
Si tu dispostivo es XX230v (EU), deberas primero actualizar con el FW(trans) para convertir tu unidad de EU a ES, despues podras actualizar a esta version. Por favor contacta con el Soport Tecnico.

Release Notes:

1. Support Platform multi-language
2. InternetGatewayDevice.DeviceInfo.ProductClass >>> XX230v
3. Default Wan Connection (IPoE, VLAN100)
4. default tr069 data model is TR-098
5. Fixed OEMID as B5C690E5A92515024C861680640F9B61
6. Fixed Wireless Channel and Power CE
7. Time Zone East one, Region Spain
8. Support GenieACS to set the following parameters through TR098 node:
  a. Add WAN connection
  b. Add Voice account
  c. Setting up remote access and configuring remote ICMP can be done at the same time
  d. Set up DMZ
  e. Factory state can be enabled by ACS and set the password of advanced account and common account
9. The default CPEID of CWMP is GPONSN.
10. Automatically replace GPONSN prefix with HWTC when switching to H Mode.
11. The WAN connection issued by IPhost command binds CWMP service by default.
12. WAN connections issued by IPhost command with the same configuration (plugging/unplugging optical fiber or rebooting the sample) do not trigger the deletion-recreating process of WAN connections.
13. Normal restoration of factory settings will not restore OLTMODE settings.
14. Maximum ACL rule is 10.
15. Add access privilege settings for telephony,3g/4g Settings,Qos,Security,Systemtools,cloud General account, advanced account can be configured.
16. When the ServiceType of WAN connection is VOIP, synchronize the Bound Interface of Telephone Numbers page to this WAN connection.
17. Other WAN connections that are not Internet connections (CWMP) can be pinged by PCs that are not on the same network segment.
18. HTTP/HTTPS remote access parameters can be set at the same time.
19. The UpTime of WAN connection is added to the page (synchronized with the page modification of DSL and routing models).
20. The LAN Settings page displays the LAN connection status, and the LAN/WAN multiplexing port is displayed as "LAN4/WAN" in the table on the LAN Settings page and the table on the Status page.
21. Disable the upgrade and wan editing function of normal account by default.
22. Update ProductID to 0x77c88d01("2009632001").
23. Fix the problem that ISP customers can not answer successfully after the phone call is called in, as feedback from the front line. (The first codec of SDP is telephone-event 101, which leads to negotiation failure)

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

De United States?

Obtener productos, eventos y servicios para su región.