How to fill the water tank for the Robot Vacuum

Further Assistance
Updated 05-17-2024 03:00:56 AM 17901
This Article Applies to: 

Before You Start

• Fill with cool/room temperature water only. Be careful not to wet the metal contacts.

• Use only cleaning agents specified by Tapo. Others may corrode the water tank.

RV10/RV20 Mop

1. Take out the dustbin and water tank.

2. Remove the rubber plug and add water to the water tank.

3. Re-install the dustbin and water tank.

RV10 Plus/RV20 Mop Plus

1. Take out the dustbin and water tank.

2. Remove the rubber plug and add water to the water tank.

3. Re-install the dustbin and water tank.

RV30

1. Take out the dustbin and water tank.

2. Remove the rubber plug and add water to the water tank.

3. Re-install the dustbin and water tank.

RV30 Plus

1. Take out the dustbin and water tank.

2. Remove the rubber plug and add water to the water tank.

3. Re-install the dustbin and water tank.

RV30 Max Plus

1. Take out the dustbin and water tank.

2. Remove the rubber plug and add water to the water tank.

Note: To prevent corrosion, do NOT add any cleaning agents. Only use cool or room temperature water and be careful not to wet the metal contacts.

3. Wipe the water tank with a clean, dry cloth.

4. Re-install the dustbin and water tank.

Is this faq useful?

Your feedback helps improve this site.

Recommend Products

Community

TP-Link Community

Still need help? Search for answers, ask questions, and get help from TP-Link experts and other users around the world.

Visit the Community >

From United States?

Get products, events and services for your region.