Tải về cho T1500G-10MPS V2

Vui lòng chọn phiên bản phần cứng:

V2

>Làm sao để biết phiên bản phần cứng của thiết bị TP-Link

QUAN TRỌNG: Tính khả dụng của kiểu máy và phiên bản phần cứng khác nhau tùy theo khu vực. Vui lòng tham khảo trang web khu vực TP-Link của bạn để xác định tình trạng sẵn có của sản phẩm.
Product Overview
Tài Liệu

MIBs Files

T1500G-10MPS(UN)_V2_MIB_20180530

Tải Về
Ngày Phát Hành: 2019-05-13 Ngôn Ngữ: English Kích cỡ tập tin: 206.21 KB
Hệ Điều Hành: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Client

TP-LINK_802.1X_Client_Software

Tải Về
Ngày Phát Hành: 2017-09-05 Ngôn Ngữ: English Kích cỡ tập tin: 5.5MB
Hệ Điều Hành: Win2000/XP/2003/Vista/7/8/8.1/10

Câu hỏi thường gặp

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8);   Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
    Làm sao để biết phiên bản phần cứng của thiết bị TP-Link
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T1500G-10MPS(UN)_V2_20200109

Tải Về
Ngày Phát Hành: 2020-04-20 Ngôn Ngữ: English Kích cỡ tập tin: 9.15 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing reset option from Bootutil.
4. Add built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled. 
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T1500G-10MPS(UN) V2.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.

3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T1500G-10MPS(UN)_V2_190424

Tải Về
Ngày Phát Hành: 2019-07-25 Ngôn Ngữ: English Kích cỡ tập tin: 8.84 MB

Modifications and Bug Fixes:
1. Enhanced the MVR function.
2. Support TLS 1.2.
3. Fix the bug that NTP server will be changed when set up only one NTP server and fail to get the time.
4. Fix the bug that cannot set up auto mode for fiber ports which in portchannel. 
5. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
1. For T1500G-10MPS(UN) 2.0.
2. If your device's Hardware Version is 1.0, after upgrading to this firmware, the old configuration will be lost.

T1500G-10MPS(UN)_V2_180530

Tải Về
Ngày Phát Hành: 2018-06-22 Ngôn Ngữ: English Kích cỡ tập tin: 7.58 MB

Modifications and Bug Fixes: First firmware released.
Notes: For T1500G-10MPS(UN) V2.0

Sử dụng Firmware của bên thứ 3 trên sản phầm TP-Link

Một số firmware chính thức của các sản phẩm TP-LINK có thể được thay thế bằng firmware của bên thứ ba chẳng hạn như DD-WRT. TP-LINK không cung cấp vấn đề hỗ trợ kĩ thuật và đảm bảo hiệu năng cũng như tính ổn định của firmware bên thứ ba. Khi sản phẩm bị hư hại do sử dụng firmware của bên thứ 3 thì chế độ bảo hành sản phẩm sẽ bị vô hiệu.

 

From United States?

Get products, events and services for your region.