TP-Link, Reliably Smart
How to Leave a Powerline network by Pair Button?
User Application Requirement
Updated 12-19-2016 00:54:08 AM
This Article Applies to:
TL-WPA4227KIT , TL-PA7020P , TL-PA551KIT , TL-PA511 , TL-PA511KIT , TL-PA411KIT , TL-WPA4226T KIT , TL-PA111KIT , TL-PA210 , TL-PA4010P , TL-PA4010P KIT , TL-PA211 , TL-PA2030KIT , TL-PA251 , TL-WPA4221 KIT , TL-PA111 , TL-PA8010P( V1 V2 ) , TL-WPA2220 , TL-PA4020P , TL-WPA4220KIT , TL-PA250KIT , TL-PA250 , TL-WPA4220T KIT , TL-PA7017P KIT , TL-PA6010KIT , TL-PA2010 , TL-PA201 , TL-PA101 , TL-WPA271 , TL-PA411 , TL-WPA271KIT , TL-PA210KIT , TL-PA551 , TL-PA6010 , TL-WPA2220KIT , TL-PA2010KIT , TL-PA251KIT , TL-PA4030KIT , TL-PA7020 , TL-PA4010 KIT , TL-PA2010P , TL-PA4010 , TL-PA4020P KIT , TL-PA4020 KIT , TL-WPA4220 KIT , TL-WPA281KIT , TL-PA201KIT , TL-WPA281 , TL-PA101KIT , TL-PA2030 , TL-PA7020 KIT , TL-PA7020P KIT , TL-PA8010P KIT( V1 V2 ) , TL-PA211KIT , TL-PA4030 , TL-PA8030P KIT , TL-WPA4226KIT , TL-WPA4220
As the figure shown below, Powerline adapter A, B and C have formed a HomeplugAV Network. The user wants to remove one device (Powerline adapter C) from this network.
Step 1 Press and hold the Pair button on Powerline adapter C for at least 10 seconds. Powerline adapter C will restart.( The PWR LED of Powerline adapter C will momentarily extinguish and flash during restarting then illuminate steadily.)
Note:For homeplugAV2 like TL-PA8010P, TL-PA8030P,TL-PA7020P KIT please press and hold the pair button for 8 seconds to leave a Powerline network.
Step 2 Wait for the restart process to complete. After this, Adapter C is removed from this network.
Is this faq useful?
Your feedback helps improve this site.
Your feedback helps improve this site.
Any other feedback?
How can we improve it?
- About Us
Copyright © 2019 TP-Link Technologies Co., Ltd. All rights reserved.