How to Configure OneMesh Wireless Network on TP-Link Wireless Dual Band 4G LTE Router Archer MR600

Configuration Guide
Updated 07-20-2021 03:50:43 AM 106659
This Article Applies to: 

TP-Link OneMesh extender will automatically join the router’s OneMesh network once connected. Check on the router‘s web management page to see if the OneMesh network is well-configured.


Case 1: If the extender is connected to this router:


1. Visit, and log in with the password. Please refer to How to log into the web-based management interface of TP-Link Wireless Dual Band 4G LTE Router?

2. Go to BasicOneMesh or AdvancedOneMesh.

3. When an extender joins the OneMesh network, it will be listed in the Devices in

OneMesh Network list. Otherwise, you need to find it in the Available OneMesh

Devices list and click Add to add it to the OneMesh network.



Now your router and extenders successfully form one OneMesh network!


It is recommended to enable Smart Connect feature on WirelessWireless Settings to enjoy a seamless connection between dual-band networks. With Smart Connect enabled, the router’s 2.4GHz and 5GHz share the same SSID (network name) and password.


Case 2: If the extender is not connected to this router:


1. Connect one or more OneMesh extenders to this router by following the setup

Instructions in the extenders’ manuals.

Note: To check full list of TP-Link OneMesh extenders or other devices, visit

2. Follow case 1 to add range extender into OneMesh network.


Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Related FAQs

Looking for More

Is this faq useful?

Your feedback helps improve this site.

Recommend Products

From United States?

Get products, events and services for your region.