How to Upgrade TP-Link Wireless 11AC Access Point?
Notices for upgrading:
1.Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）
For how to check the hardware version of the device please refer to here .
2.After you download the firmware from TP-Link website, please use unzip tools such as WinZIP or WinRAR to extract the firmware file to a folder on your computer;
3.It’s recommended to upgrade the firmware via Ethernet cable connection but not wireless connection;
4.Do NOT turn off the power or unplug the Ethernet cable during upgrade process.
Steps for Upgrading:
Connect your computer to the Ethernet port of the device by Ethernet cable. Make sure your network card is set to DHCP.
1.Open a web browser (such as Internet Explorer, Firefox) and input 192.168.0.254 or http://tplinkap.net into the address bar, then press Enter.
2.Type in the Username and Password (both admin by default) and click Login.
Go to Advanced->System Tools->Firmware Upgrade, click Browse button to choose the firmware file you have unzipped before and click Upgrade.
The device will reboot automatically after upgrading successfully, please wait for 2~3 minutes.
Is this faq useful?
Your feedback helps improve this site.
Iscriviti alla newsletter TP-Link prende la Privacy seriamente. Per maggiori informazioni sul trattamento dei tuoi dati consulta l'Informativa Privacy.