Click to skip the navigation bar

How to set up IP & MAC Binding Function on AC VDSL/ADSL Modem Router

User Application Requirement
Updated 08-22-2025 03:30:51 AM Number of views for this article57182
This Article Applies to:

User’s Application Scenario:

IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind network device’s IP address to its MAC address. This will prevent ARP spoofing and other ARP attacks by denying network access to a device with matching IP address in the Binding list, but unrecognized MAC address.

How can I do that?

Follow the steps below:

Archer VR2600 is used for demonstration in this article.

Step 1

Please login to the management page referring to How to log into the web-based interface of the AC VDSLADSL Modem Router.

Step 2

Go to Advanced > Security > IP & MAC Binding and enable IP & MAC Binding.

Enable IP & MAC Binding.

Step 3

Bind your device(s) according to your needs.

To bind the connected device(s).

(1) Select the device(s) to be bound in the ARP List.

(2) Click Bind to add to the Binding List.

To bind the unconnected device

(1) Click Add.

Click Add.

(2) Enter the MAC address and IP address that you want to bind.

Please click How to check the MAC address of your computer for detailed instruction.

(3) Select the check box to enable the entry and click OK.

Now you don’t need to worry about ARP spoofing and ARP attacks.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Questa faq è utile?

Your feedback helps improve this site.

Recommend Products