How to Configure the AP Mode on the TL-WR702N(Another case)

User Application Requirement
Updated 05-25-2016 05:41:59 AM 61082
Ez a leírás a következő eszköz(ök)re alkalmazható:: 
Note: This FAQ is only suitable for TL-WR702N with firmware version 130528 or later.
Definition:The TL-WR702N is connected to a wired network and transforms the wired Internet access into wireless so that multiple devices can share the Internet.
Application:
1.     Office, hotel and places where only wired network is available.
2.     LAN gaming party, small meeting and other situations where a temporary wireless network is needed.
Step1
Connect thecomputer to the TL-WR702N with an Ethernet cable. Open the web browser and type the IP address  http://192.168.0.254  into the address bar and then Press Enter.
 
Step 2
Type the username and password into the boxes of the login page, the default username and password both are admin, then press Enter.
 
Step 3
 Go to Quick Setup-> Click Next
Step 4
Select AP-> Click Next
Step 5
Customize your wireless name (SSID) and password
 
Wireless Radio: Enable
SSID: (Rename Your Wireless Name)
Region:(Select Your Current Location)
Channel: Auto
Mode: 11bgn mixed
Channel Width: Auto
Security Options: WPA-PSK/WPA2-PSK
PSK Password: (Create a Private Password)
Step 6
Click Reboot, and wait until it goes to 100%
 
Step 7
Relocate the TL-WR702N
You may now connect the TL-WR702N directly into your Wired Ethernet Network Connection as displayed on the picture below.
Congratulations! All your Wi-Fi enabled devices can connect to the customized wireless network.

If it doesn't work, please feel free to contact us(support@tp-link.com). 

 

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Ez a GY.I.K. hasznos volt?

Véleménye segíti az oldal fejlesztését

From United States?

Get products, events and services for your region.