How to install TD-W8950N(D) , TD-W8960N(D/B), TD-8810/8840, TD-W8910G/8920G, TD-W8968 V3 to work with IPoA or Static IP
Ez a leírás a következő eszköz(ök)re alkalmazható::
Note: For the configuration, you should know the IP parameters, connection type, VPI/VCI number. If you are not sure about the information, contact your ISP to double check it first.
Open the web browser and type the IP address of the device in the address bar (default is http://192.168.1.1, you can check it on the bottom label of the device). Then press Enter.
Input username and password in the login page, the default username and password both are admin, click OK to login the web page.
Click on Quick Setup on the left side.
Input the correct VPI and VCI value (provided by your ISP). Click on Next .
Select IP over ATM(IPoA), and then click on Next.
Enter WAN IP address, WAN subnet mask, Default Gateway and DNS Server, and then go to next.
All the information in this page is very important and can´t be incorrect. If you are not sure, please call your ISP to have a check.
Click on Next.
If your ADSL2+ modem router does not support wireless function, you can skip this step.
If you want to connect to it via wireless,select Enable Wireless and set up your wireless network:
SSID: Create your wireless network name.
Wireless Security: Choose Disable Security to leave it unsecured or WPA-PSK/WPA2-PSK to secure your wireless network and create yourpassword in the Network Key box.
Click Save/Reboot to save the settings and restart the router.
Ez a GY.I.K. hasznos volt?
Véleménye segíti az oldal fejlesztését