How to Install Kasa Smart Thermostatic Radiator Valve

KE100 KIT , KE110 , KE100
Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device, and check either the Datasheet or the firmware section for the latest improvements added to your product. Please note that product availability varies by region, and certain models may not be available in your region.
Follow the instructions below to install your Kasa Smart Thermostatic Radiator Valve.
Note: There are two types of valves: The thermostatic and Manual.
Kasa Smart Thermostatic Radiator Valve is only compatible with the thermostatic valve.
Install Requirements
- Install the valve first before powering it up.
- No need to shut off the water before changing the radiator valve. Water will not leak.
- Avoid installing the valve in the same room where you have installed the boiler thermostat.
- Install the valve within range of your Kasa smart hub if you wish to control it using the Kasa Smart app.
Start Installation
- Remove your existing valve.
- Install the new valve.
- For M30x15mm Connector
Screw your new valve onto the radiator directly. The ▲ the bottom of the valve indicates the position of the display.
- For Non-M30x15mm Connector
Fit the suitable adapter onto your radiator connector. Then screw the valve onto the adapter. The ▲ at the bottom of the valve indicates the position of the display.
- Power on your valve.
Remove the cover of the valve by rotating counterclockwise using the provided cover-opener.
Open the battery cover and insert two AA LR6 Alkaline batteries. Make sure the positive and negative terminals face the correct direction.
*Do NOT use rechargeable batteries or 1.2V AA batteries.
Set Up the Valve
If you want to remotely control/manage the valve, you need to add a Kasa smart hub first.
- Set up a Kasa smart hub in the Kasa Smart app if you haven’t already done so. You can get the Kasa Smart app from the App Store or Google Play.
- Use the provided cover-opener to press and hold the SYNC/RESET button for 5 seconds to reset the valve.
- Open the Kasa Smart app, tap + and select Smart Thermostats. Follow the app instructions to pair the valve and complete setup.
Note: If you don’t have a hub, you can adjust the temperature manually. After inserting the batteries, the valve is ready to use. Rotate the valve to increase/decrease temperature.
Compatible Batteries:
Battery Type |
Battery Voltage |
Work Temperature |
AA LR6 alkaline battery |
1.5V |
0℃-40℃ |
Note: Do NOT use rechargeable batteries or 1.2V AA batteries.
Ez a GY.I.K. hasznos volt?
Véleménye segíti az oldal fejlesztését
What’s your concern with this article?
- Dissatisfied with product
- Too Complicated
- Confusing Title
- Does not apply to me
- Too Vague
- Other
Thank you
We appreciate your feedback.
Click here to contact TP-Link technical support.
Recommend Products
Ez a weboldal cookie -kat használ a weboldal navigációjának javítása, az online tevékenységek elemzése és a felhasználók számára a legjobb élmény biztosítása érdekében. A cookie -k használata ellen bármikor tiltakozhat. További információt az adatvédelmi irányelveinkben talál.
Your Privacy Choices
Ez a weboldal cookie -kat használ a weboldal navigációjának javítása, az online tevékenységek elemzése és a felhasználók számára a legjobb élmény biztosítása érdekében. A cookie -k használata ellen bármikor tiltakozhat. További információt az adatvédelmi irányelveinkben talál.
Ezek a cookie -k a webhely működéséhez szükségesek, és nem tilthatók le a rendszereiben.
TP-Link
accepted_local_switcher, tp_privacy_banner, tp_privacy_base, tp_privacy_marketing, tp_top-banner, tp_popup-bottom, tp_popup-center, tp_popup-right-middle, tp_popup-right-bottom, tp_productCategoryType
Youtube
id, VISITOR_INFO1_LIVE, LOGIN_INFO, SIDCC, SAPISID, APISID, SSID, SID, YSC, __Secure-1PSID, __Secure-1PAPISID, __Secure-1PSIDCC, __Secure-3PSID, __Secure-3PAPISID, __Secure-3PSIDCC, 1P_JAR, AEC, NID, OTZ
Az elemző cookie -k lehetővé teszik számunkra, hogy elemezzük weboldalunkon végzett tevékenységeit, hogy javítsuk és módosítsuk webhelyünk működését.
Hirdetési partnereink a weboldalunkon keresztül marketing cookie -kat állíthatnak be annak érdekében, hogy érdeklődési körének profilját, és hogy releváns hirdetéseket jelenítsen meg más webhelyeken.
Google Analytics & Google Tag Manager
_gid, _ga_<container-id>, _ga, _gat_gtag_<container-id>
Google Ads & DoubleClick
test_cookie, _gcl_au
Meta Pixel
_fbp
Crazy Egg
cebsp_, _ce.s, _ce.clock_data, _ce.clock_event, cebs
lidc, AnalyticsSyncHistory, UserMatchHistory, bcookie, li_sugr, ln_or