-
Σπιτι
Modems/ Gateways
Η πόρτα σας στο Διαδίκτυο
Επέκταση Δικτύου
Εύκολοι τρόποι επέκτασης και βελτίωσης του δικτύου σας
SOHO Switches
Διατηρώντας το σπίτι σας ενσύρματο για ποιοτικές συνδέσεις
Αντάπτορες
Εξοπλίστε τις συσκευές σας για ταχύτερο Wi-Fi
Αξεσουάρ
Όλα όσα χρειάζεστε για έναν συνδεδεμένο τρόπο ζωής
-
Εξυπνο Σπιτι
Ασφάλεια Σπιτιού
Παρακολουθώντας ότι έχει σημασία
Έξυπνες Πρίζες
Κάντε τις οικιακές σας συσκευές πιο έξυπνες
Έξυπνες Λάμπες
Φως για κάθε περίσταση
-
Επιχειρησεις
JetStream Switches
High-Speed ενσύρματη δικτύωση από L3 managed μέχρι unmanaged
Σειρά Omada EAP
Επαγγελματικό επιχειρηματικό Wi-Fi με κεντρική διαχείριση
Omada Cloud SDN
Η πιο έξυπνη λύση cloud για επιχειρηματική δικτύωση
Pharos Wireless Broadband
Ιδανικό για ασύρματη ευρυζωνική δικτύωση μεγάλης εμβέλειας
-
Παροχοι Ιντερνετ
DSL
Δυνατότητα υψηλής ταχύτητας δικτύου και ολοκληρωμένων ευρυζωνικών εφαρμογών
Powerline Αντάπτορας
Μετατρέπει την ηλεκτρική καλωδίωση για να μεταφέρει το σήμα δικτύου.
Range Extender
Επεκτείνετε εύκολα την κάλυψη Wi-Fi.
Switches
Ενισχύει το επιχειρηματικό σας δίκτυο με εξαιρετική απόδοση.
Επαγγελματικό Ασύρματο
Μεταφέρει το εταιρικό σας Wi-Fi σε νέα επίπεδα.
Why my TP-Link Router gets a WAN IP from the modem but no internet access?
Make sure Internet is working by connecting the computer directly to the modem and, bypassing the TP-Link router.
Problem Description:
No internet access after setup, even though the router has been given a valid IP address.
Note: If you are not sure how to log into the router's web interface to check the WAN IP Address, please click here.
Solution 1:Set up manual DNS Servers for the router.
- Click on DHCP -> DHCP settings, then put 8.8.8.8 into the Primary DNS field, click Save.
8.8.8.8 is a free and safe public DNS server provided by Google.
- Reboot the router to finish the settings.
Go to System Tools -> Reboot, click on “Reboot” button to finish the settings.
|
|
Solution 2: Power Cycle the modem and the TP-Link router.
- Power off your modem and TP-Link router, leave them off for 1 minute.
- Unplug the modem’s power cord and unscrew the coaxial cable.
- Connect the modem to the Router’s WAN port and make sure the Router is powered on.
- Plug the power cord for the modem back in, but leave the coaxial cable disconnected.
- Wait 3-5 minutes and reconnect the coaxial cable.
- Wait for modem to reconnect and then check for IP and service.
Solution 3: Reset the router and reconfigure it manually.
- Hold the Reset button for more than 10 seconds to reset the router.
- Reconfigure the router manually through Quick Setup.
Your feedback helps improve this site.