Descarga para TL-WA1201 V3

Elige la versión de hardware:


>Cómo encontrar la versión de hardware en un dispositivo de TP-Link

IMPORTANTE : La disponibilidad de modelos y versiones de hardware varía según la región. Consulta el sitio web regional de TP-Link para determinar la disponibilidad del producto.

Preguntas Frecuentes


A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8);   Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
    Cómo encontrar la versión de hardware en un dispositivo de TP-Link
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TL-WA1201(EU)_V3_1.10.33 Build 240115

Fecha de Publicación: 2024-02-26 Idioma: Multilingüe Tamaño de Archivo: 2.98 MB

Modifications and Bug Fixes:
1. Fixed the bug that devices displayed in the Client list are Unknown when DHCP is disabled;
2. Fixed the bug that the client List display in Multi-SSID mode is incomplete.
3. Fixed the bug that MyQ device connection failure.

TL-WA1201(EU)_V3_1.10.32 Build 221020

Fecha de Publicación: 2022-12-27 Idioma: Multilingüe Tamaño de Archivo: 2.97 MB

Modifications and Bug Fixes:
1. Fixed the bug that when more than three APs work together, the device may work unsteadily if the aging time is specified;
2. Fixed the bug that the device may fail to connect to 2.4G wireless in a high-interference environment;
3. Fixed the bug that where wireless SSID might change under certain circumstances;
4. Fixed the bug that the DUT still sends ARP packets every 32 seconds after the client is offline;
5. Optimize 5G wireless performance;
6. Optimizing wired connection stability.

1. For TL-WA1201(EU) V3.0.


Fecha de Publicación: 2022-03-29 Idioma: Multilingüe Tamaño de Archivo: 3.08 MB

First firmware released.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.


Versión de Firmware
Modo en Uso
Range Extender
Access Point


1. El emulador es una GUI web virtual donde puede experimentar el panel de administración de productos TP-Link.

2. Es posible que los emuladores enumerados no tengan el firmware más reciente.

3. Las funciones que se muestran son para referencia y su disponibilidad puede depender de las regulaciones locales. Para obtener más información, consulte la hoja de datos o la página del producto.

De United States?

Obtener productos, eventos y servicios para su región.