-
Home
Your doorway to the internet
Easy ways to expand and enhance your network
Keeping your home wired for quality connections
Equip your devices for a faster Wi-Fi
Everything else you need for a connected lifestyle
-
Smart Home
Keeping an eye on what matters
Smarten up your home devices
Light for every occasion
More than just on and off
-
Business
The smarter cloud solution for business networking
High-Speed wired networking from L3 managed to unmanaged
Professional business Wi-Fi with centralized management
Ideal for long range wireless broadband networking
Secure VPN and Load Balance gateways to the business
VIGI video surveillance is dedicated to your security
-
Service Provider
The reliable choice for home networking
A seamless, intelligent and easy-to-configure mesh network
Capable of high-speed network and integrated broadband applications
The leading technology for delivering gigabit Internet services
How to Configure WDS Bridging on TP-Link Dual Band Routers (green UI)?
A Wireless Distribution System (WDS) is a system that enables the wireless interconnection of access points in a wireless network. It allows a router’s wireless network to be expanded using multiple access points without the need for a wire to connect them, as is traditionally required.
.png)
Note:
1. LAN IP of extended router should be different but in the same subnet of the root router;
2. The DHCP Server on extended router should be disabled;
3. WDS bridging only requires the WDS setting on either the root router or the extended router, on either 2.4GHz or 5GHz; No need to setup this up on both sides or bands.
Please follow this guide to setup the WDS bridging:
Step 1:
Open the web browser and type in http://tplinkwifi.net or the IP of the router (Default it is 192.168.0.1 / 192.168.1.1) to login the Web Management Page of the extended router. The username and password are both "admin". If you are not sure about how to do this, please click here.

.jpg)
Step 3:
Log into the web page with new IP Address. Go to Wireless 2.4GHz -> Wireless Settings. Check Enable WDS Bridging. Then the page will show like below.
Note: Here we use 2.4GHz wireless network as an example, if you want to WDS bridging the 5GHz wireless network, please go to Wireless 5GHz accordingly.
.png)
.png)
.png)
.jpg)
.jpg)
.png)
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
Your feedback helps improve this site.
Sign Up for News & OffersTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.