How to set up system time of TP-Link cable modem routers (new logo)?

Configuration Guide
Updated 03-02-2017 12:09:19 PM
This Article Applies to: 

System time is the time displayed while the modem router is running. The system time you configure here will be used for other time-based functions like Parental Control.

You can manually set how to get the system time.

Here takes Archer CR700 as demonstration:

Follow the steps below to set your system time.

1. Log into the web-based management interface of the cable modem router. If you don’t know how to do that, please refer to How to log into the web-based management interface of TP-Link cable modem routers (new logo)?

2. Go to Advanced > System Tools > Time Settings page.

3. Select Enable SNTP.

4. Enter the IP address or domain name of Time Server 1, Time Server 2 or Time Server 3, and the router will get the time from the NTP Server automatically. In addition, the router has some common built-in NTP Servers that will synchronize automatically once it connects to the Internet.

5. Select your local time zone from the Time Zone drop-down list.

6. Click Save.

 

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.