Search
Search

What can I do if I forget the login username/password of my DSL modem/router?

User Application Requirement
Updated 11-25-2020 07:03:29 AM 1240290
This Article Applies to: 
The default login username and password both are admin.If you or someone had changed them but you forget them now, the only way to access the modem/router is to reset the router to factory default settings.
Note: If you reset the device, the device will return to factory defaults, you will lose all your settings.
 
Step 1 Turn off the router.
Step 2 Press and hold the reset button on the rear panel with a pin, then turn on the router.  (Do not release the reset button when you turn on the router and Please keep holding the button for about 6~10 seconds after turning on the router).

Step 3 Release the reset button and wait for the device to reboot.
 
Note:
1. Make certain that the router is powered on before it restarts completely. 2. The default IP address is 192.168.1.1, and the default login username and password both are admin (all lower case).
3.  Ensure that the IP address of your computer is in the same subnet with the device.  It means that your computer should have an IP address 192.168.1.X (X is in range of 2~253), and the subnet mask is 255.255.255.0, the default gateway should be 192.168.1.1 which is the IP address of the router.For your reference:

https://www.tp-link.com/support/faq/841/

 
 

Sign Up for News & OffersTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.

Follow Us

About Us
Press
Learning Center
Worldwide / English
Copyright © 2020 TP-Link Corporation Limited. All rights reserved.

From United States (English)?

Check products and services for your region.

Go Other Option