Search
Search

How to set up QoS for RTSP in TD-8816/8817,TD-W8961ND/W8951ND/W8151N/W8901G/W8901N?

User Application Requirement
Updated 05-25-2015 02:32:02 AM 13142
This Article Applies to: 

Please make sure Internet is OK first, and then configure QoS as below:

Suppose the topology is as following, please follow the steps to make RTSP data have the highest priority for the whole network.

Configuration for QoS:

Step 1 Open your browser and enter 192.168.1.1 in your address bar, then press "Enter".

Step 2  Enter the username and password of your modem. By default it will be Username: "admin" and Password: "admin" or if you have changed this, please enter the new username and password.

Step 3  Click on "Advanced Setup" on the top menu and click on "QoS",

Set following parameters as below.

Note:If QoS is applied in some single computer, please set the Source IP Address with Subnet Mask or Source MAC address in the rule.

At last click add button to finish adding the rule.

Now you can test RTSP QoS with the settings.

Note: For further information of the options, please refer User Guide coming with the product.

 

SuscripciónTP-Link toma en serio su privacidad. Para obtener más detalles sobre las prácticas de privacidad de TP-Link, consulte la Política de privacidad de TP-Link.

Síguenos

Acerca de Nosotros
Prensa
Dónde Comprar
Centro de Aprendizaje
Argentina / Español
Copyright © TP-Link Corporation Limited. 2021. Todos los derechos reservados

From United States?

Check products and services for your region.

Go Other Option