-
Hogar
Adaptadores
Placa de red y Receptor de señal Wi-Fi: USB o PCle
Accesorios
Bluetooth, USB, Powerbank, Type-C, etc.
-
Cámaras Tapo
Cámaras Cloud
Cámaras Inteligentes para Interior y Exterior
-
Negocios
JetStream Switches
Las redes cableadas de alta velocidad de L3 lograron no administradas
Omada EAP
Professional business Wi-Fi with centralized management
Omada Cloud SDN
The smarter cloud solution for business networking
Pharos Wireless Broadband
Ideal para redes inalámbricas de largo alcance y banda ancha
SafeStream Router
VPN segura y puertas de enlace de equilibrio de carga para el negocio
-
Proveedor de Servicios
DSL
Capable of high-speed network and integrated broadband applications
LTE/3G
Maintains internet access wherever you go.
PON
The leading technology for delivering gigabit Internet services
Powerline Adapter
Transforms electrical wiring to carry the network signal.
Range Extender
Easily expand your Wi-Fi coverage.
Switches
Boosts your business network with premium performance.
Business Wireless
Takes your enterprise Wi-Fi to new levels.
- CURSOS
How do I install TL-WR820N to work with a Cable Modem?
Advanced Preparations:
Please refer to the QIG in the packet to connect the hardware.
Note: please make sure you are able to access internet with a direct connection from the main computer to your cable modem. If the direct connection doesn’t work, please contact your Internet Service Provider.
If you are unable to access the internet please do the following:
Step 1
Log in to the router’s web-based interface, to get some help, please refer to the article
How do I log in web-based management interface/utility of TL-WR820N?
Step 2
Go to Network for basic WAN settings, or go to Advanced > Network > WAN Settings for advanced WAN settings. Select Dynamic IP as the Internet/WAN Connection.
Step 3
Wait for a few minutes and check the Internet part on the Status page, if it shows any IP address, which means the connection between the Router and the Modem is established. If there is no IP address, please move to step 4.
Step 4
If there is still no IP address, please do the following:
- Restart the router first, wait for about 10 seconds, and connect your end-device like computer, laptop to the router.
- Power off the modem, and unscrew the coaxial cable
- Power on the modem, Check LEDs on the Router, make certain WAN/Internet LED is on.
- Reconnect the coaxial cable to the modem and check if you can access to the internet.
Note: Some cable modem has a back-up battery inside. To completely restart the cable modem, please take the battery out, and then unplug the power supply.
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
Your feedback helps improve this site.