How to configure the Wireless AP/Client Router in Repeater mode?

Configuration Guide
Updated 04-27-2017 01:59:43 AM 13031
Este artículo se aplica a: 

Here takes TL-WR843N_V3 as demonstration.

1. Log into the router’s web management page:

How do I log into the web-based Utility (Management Page) of TP-Link wireless router?

2. Go to Quick Setup and click Next to start.

3. Check Control the system mode by software, choose Repeater mode you need and then click Next.

Note: When the box for Control the system mode by software is checked, the operation mode switch on the router will be disabled. If you want to enable it, please log in to the web management page and go to Working Mode to uncheck the box for Control the system mode by software.

4. Click Survey to find your host network and click Connect. Enter the host network’s password in the Wireless Password field, and then click Next.

5. Select the LAN IP type of the router or leave the default setting Smart IP for most cases, and then click Next.

6. Click Reboot to complete the configuration.

7. Relocate the router about halfway between your host AP and the Wi-Fi dead zone. The extended network shares the same SSID (network name) and password as those of your host network.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

SuscripciónTP-Link se toma en serio su privacidad. Para obtener más detalles sobre las prácticas de privacidad de TP-Link, consulte la Política de privacidad de TP-Link .

Desde United States?

Obtenga productos, eventos y servicios para su región.