Tapo D235


Tapo Video Doorbell Camera

  • 2K 5MP Head-to-Toe View - D235’s 4:3 aspect ratio captures a 180° field of view with high resolution.
  • Smart AI Detection and Notification - Smart AI identifies people, pets, and packages, notifying users as needed.
  • 360 Days of Use - Tapo D235 supports being used for 360 days. No more worrying about missing what happens outside your door.
  • Two-Way Audio - Enables communication through a built-in microphone and speaker.
  • Powered by Hardwire or Battery - Place the doorbell anywhere you need.


Always Know Who’s There

Video Doorbell Camera

Tapo D235


    Hardwire & Battery
    Power Supply




    IP66 Water &
    Dust Resistance

work with google home icon work with amazon alexa icon work with tapo care icon
2K 5MP
Live View + Starlight Sensor
4:3 /180° filed of View
Wire-Free &
Hardwire Supported
Local and Cloud Storage
Smart AI Detection
Person / Pet / Vehicle / Package
Flexible Reply Ways
Anti-Theft Alarm
Activity Zone

2K 5MP Head-to-Toe 180° DFOV

Details matter, and with 2K 5MP clarity, Tapo D235 exceeds traditional Full HD resolution with finer details and incredible clarity. Experience the full picture with our 180° ultra-wide field of view, capturing every detail from head to toe in a single sweeping glance.


160° icon

Others brand


180° icon

Tapo D235


Various Power Supply Methods


Wire-Free with battery

The rechargeable 10000mAh battery* can largely extend your usage and gives you flexibility to place it anywhere you need.

210 Days

*The time of use includes recording and watching live views. Actual battery life may vary due to device settings, usage, router specifications, and environmental factors.


Hardwire Supported

Never miss a moment with hardwired, continuous 24/7 video recording.**


Continuous Recording

**This mode dose not support existing chime use.


Flexible Wedges, Flexible Views

Different wedge choices give users possibilities to make the doorbell suits more placement scenarios. Users can also use these wedges to adjust the views.


Local and Cloud Storage

Save recorded videos on the microSD Card (up to 512 GB, purchased separately) or use Tapo Care cloud storage services (subscribe separately).

Up to

512 GB

Smart AI Detection and Notification

Smart AI identifies people, pets, vehicles, and packages, notifying users as needed.


Flexible Reply Ways

With voice changer two-way audio or a recorded quick response, communicate directly with your deliveries through the Tapo app.

Flexible Reply Ways

With voice changer two-way audio or a recorded quick response, communicate directly with your deliveries through the Tapo app.

Two-Way Audio


Customizable Quick Responses

Hello? Your package arrived.

Two-Way Audio

Customizable Quick Responses


Indoor Chime Provided

Choose from a variety of ringtones to get alerted immediately when you are at home.


Anti-theft Alarm

Be alerted when someone trying to take the doorbell off with anti-theft alarm function.


Activity Zones

Notifies you when activity is detected in specific zones.


Voice Activated

Works with Alexa and Google Assistant to see what the doorbell sees on a supported device.


Install Your Doorbell

Step 1

Option 1: Stick to the wall

Attach the included adhesive to the back of the bracket or the wedge you have selected. If you use the wedge, affix the bracket and the wedge with screws.

3M Adhesive


Mounting Wedge

Route the wires through the bracket (if there are existing wires). Wipe off the dust from the surface using a dry cloth, stick the bracket with adhesive to the smooth wall, and press it down for 15 seconds to ensure the bracket is firmly attached.


Option 2: Mount to the wall

Route the wires (if there are existing wires) through the mounting template and stick the template. Drill two holes where indicated.

Φ=6 mm (15/64 in.)

Route the wires (if there are existing wires) through the bracket. Insert two anchors into the holes and use the screws to affix the bracket over the anchors.


Step 2    Mount the doorbell to the bracket

Option 1: Battery Powered

Mount the doorbell to the bracket.


Option 2: Hardwire Powered

Connect the wires to the doorbell and tighten the screws. Mount the doorbell to the bracket and turn on the circuit breaker.

If the wires are too short

Image Sensor 1/2.7“ Progressive Scan CMOS Sensor
Lens Focal Length: 1.18mm
Aperture: F1.8
Field of View: 170.6° (Horizontal), 140.1° (Vertical)
Night Vision 850 nm IR LED (33 ft / 10 m)
Full-Color Night Vision
Lighting Built-in Spotlights
Interface & Button 1× RESET /SYNC Button
1× Doorbell Button
1× Anti-Theft Button
1× Power ON/OFF Button
Maximum Resolution 2K 5MP (2560 × 1920px)
Frame Rate 15/20 fps
Digital Zoom 16x
Video Compression H.264
Live View Yes
Image Enhancement 3DNR
Audio Input & Output Built-in Microphone and Speaker
Audio Communication Two-Way Audio with Noise Cancellation
Siren Volume 98dB (Level measured at 4-inch/10-cm distance)
Local Storage MicroSD Card Slot on Hub (Up to 512 GB)
Cloud Storage Tapo Care Cloud Storage Services (Subscription required)
Sensor Single PIR Motion Sensor (FOV: 130° horizontal)
One Ambient Light Sensor
AI Detection Motion Detection
Person Detection
Pet Detection
Vehicle Detection
Package Detection
Activity Zones Yes
*Only works with Motion Detection.
Output Notification System Notification
System Notification with Snapshot (Tapo Care Services)
Network Connectivity IEEE 802.11b/g/n, 2.4 GHz Wi-Fi
ONVIF Connect via Wi-Fi
Security On-Device Machine Learning
128-bit AES Encryption with SSL/TLS
Power Source 10000 mAh Built-in Rechargeable Lithium-ion Battery

Hardwire charge

Hardwire supply
Input Voltage Doorbell Battery Pack Adapter Input: 100-240 V, 50/60 Hz
Output Voltage Doorbell Battery Pack Adapter Output: 5.0 V, 2.0 A
Smart Integration Google Assistant, Amazon Alexa
Weather Resistance IP66
System Requirements Tapo App: iOS 9.0 or higher, Andriod 4.4 or higher
Mounting Options Stick to a Wall
Mount to a Wall
Operating Temperature -20℃~45℃
Storage Temperature -20℃~45℃
Operating Humidity 10%~90% RH, Non-condensing
Storage Humidity 0~90% RH, Non-condensing
Charging Temperature 0-45℃
Dimensions Doorbell Dimensions: 2.13 × 1.97 × 1.52 in (150 × 50 × 38.4 mm)
Chime Dimensions:
US/JP Version: 2.87×1.85×1.71 in (73×46.9×43.5 mm)
EU Version: 2.87 × 2.15 × 1.89 in (73×54.6×48 mm)
UK Version: 2.87×2.45×1.71 in (73×62.3×43.5 mm)
KR Version: 2.87×2.46×1.71 in (73×62.4×43.5mm)
AU Version: 2.87×2.01×1.71 in (73×51×43.5 mm)
Package Contents Tapo Video Doorbell × 1
Tapo Chime × 1

Mounting Template × 1
Mounting Bracket × 1

Vertical Mounting Wedge× 1
Horizontal Mounting Wedge × 1

USB Adapter Cable × 1

Jumper for Existing Chime × 1

Extension Wires × 2

Mounting Screws and Anchors × 3

Hardwire Installation Screws × 2

Doorbell Detaching Pin × 1

Mounting Wedge Screws × 5

3M Adhesive × 1
Foam Pad × 1

Wire Nuts × 2

Quick Start Guide
Certifications CE, RoHS, RCM,R-NZ,FCC, EAC, Triman, UKCA

From United States?

Get products, events and services for your region.