Download voor TL-ER6120 V2

Selecteer uw hardware versie:

V2

>Hoe vind ik de hardware versie van een TP-Link product?

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Product Overview
Document

FAQs

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
    Hoe vind ik de hardware versie van een TP-Link product?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
TL-ER6120(UN)_V2_20200313
Publicatiedatum: 2020-06-28 Taal: Engels Bestandsgrootte: 15.22 MB

New Feature/Enhancement:

1.  Upgrade webserver's HTTPS encryption suite TLS version to 1.2.

2.  Add support DHCP Option 66, Option 150, Option 159, Option 160, Option 176 and Option 242.

3.  One-to-One NAT supports the loopback function of the WAN port.

4.  Add HTTPS web server enable/disable button.

5.  Support to obtain SNMP information through WAN port and VPN connection.

6.  Support forward IPv4 Local Scope IP address as 239.255.0.0/16.

7.  Optimize the mechanism of the session limit function.

8.  Firewall optimization for PCI DSS vulnerability scanning.

9.  Optimized the MAC address (WAN/LAN port) modification mechanism. If the MAC address in the backup file is not modified, the device will keep the default MAC address after restoring the backup file.

10.  Optimize the DHCP Server mechanism, LAN devices can obtain IP addresses faster.

11.  UPnP supports adding random codes to URL to prevent DNS Rebinding attacks.

12.  Daylight saving time is adjusted from GMT to UTC.

13.  Security vulnerability optimization.

 

Bug Fixed:

1.  Fix the bug that URL Filtering is unsuccessful when accessing a website subdirectory with “/”.

2.  Fix the bug that the backup WAN port will not restore PPPoE dialing automatically when deleting the Link Backup entries.

3.  Fix the bug that LAN PC may not be able to upload data to an external server.

4.  Fix the bug that the UPnP NewExternalIPAddress interface cannot correctly obtain the IP address of WAN port.

5.  Fix the bug that VPN cannot be used after creating multiple IPSec VPN entries.

6.  Fix the bug that the VPN cannot be used normally after opening the DMZ function.

7.  Fix the bug that the VPN clients at both ends of the IPSec VPN may not be able to communicate with each other after restarting the router or modifying the WAN mode.

 

Notes:

1. For TL-ER6120 (UN) 2.0 only.

2. Your device's configuration won't be lost after upgrading.

TL-ER6120(UN)_V2_20180929
Publicatiedatum: 2018-12-26 Taal: Engels Bestandsgrootte: 15.18 MB

Modifications and Bug Fixes:

1. Enhanced contents of System Log module;
2. Enhance the Firewall module for VPN;
3. Fix the bug that it cannot establish L2TP over IPsec VPN connection when NAT exists;
4. Fix the bug that DHCP server will hang when modifying it after assigning IP to clients with the same name;
5.Fix the bug that backup WAN cannot take effect when primary WAN dial up successfully but is offline.
6. Add multi WANs selection for NAT/Policy Routing/primary WAN of Link Backup;
7. Add Only, Priority two modes for Policy Routing feature;
8. Add two sub-modes of Failover mode for Link Backup feature;

9. Add the support of DNS proxy based TCP;
10. IP-MAC Binding entries will no longer take effect when ARP Spoofing Defense is disabled. 

11. DDNS can create entries for different domain names with the same account;

12. Web filtering changes to case-insensitive;

13. HTTPS web management can be disable.

Notes:

For TL-ER6120(UN) V2

TL-ER6120(UN)_V2_20180117
Publicatiedatum: 2018-02-09 Taal: Engels Bestandsgrootte: 15.05 MB

Modifications and Bug Fixes:
1. Fixed the security hole of zero-day flaws and dnsmasq;
2. Enhanced the function of Virtual Server;
3. Add the bulk import option in ARP scanning;
4. Add the conflict detection mechanism of IPSec VPN Local Subnet and Remote Subnet;
5. Fix the problem of static routing via LAN interface;
6. Enhanced the Traffic Statistics;
7. Enhanced the stability of Load Balancing/VPN;
8. Fix the DDNS problem which will update the wrong WAN IP;
9. Fix some save config issue on the page.

Notes:
For TL-ER6120 V2

Gebruik van Firmware van Derde Partijen in TP-Link Producten 

Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen. 

Open Source Code voor Programmeerders (GPL)

 

Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.

U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.

De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.

IPSec VPN Client Software

Publicatiedatum: 2012-04-24 Taal: Engels Bestandsgrootte: 5.81 MB
Besturingssysteem: Win2000/XP/2003/Vista/7

Notes:

  1. The VPN Client software, Download tool and User Guide are in this folder. You can click TheGreenBow VPN Client to install the VPN Client or click TP-LINK VPN Client to download the latest software, what's more, please refer to IPSec VPN Client User Guide for the detailed using instructions.
  2. The IPsec VPN Client recommended by TP-LINK is a trial version. Please purchase full license from TheGreenBow through the link on the software, if required: http://thegreenbow.com/tplink

GPL Code

Emulatoren

Firmwareversie
Working Mode
Taal
170406
-
Engels
T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code:

AbonneerTP-Link hecht veel waarde aan privacy. Voor meer informatie over ons privacybeleid kan je onze Privacy Policy bekijken.

Krijg updates over nieuwe producten, samenwerkingen en ander interessant nieuws

From United States?

Check products and services for your region.