Download voor T1700G-28TQ V3

Selecteer uw hardware versie:

>Hoe vind ik de hardware versie van een TP-Link product?

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)

Product Overview

T1700G-28TQ(UN)_V3_Datasheet

Manual

MIBs Files

T1700G-28TQ(UN)_V3_MIB_20190108

Download

Publicatiedatum: 2019-05-13

Taal: Engels

Bestandsgrootte: 202.51 KB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

FAQs

How to configure LACP on our Smart/ Managed Switch 10-29-2024279698
How to Block Unknown Devices to Access the Switch by Using IP Source Guard 08-09-202495313
Why the firmware version does not change after upgrading in T Series switches? 08-09-202479159
How to configure the default gateway of the smart and managed switches using the old GUI 08-09-2024308580
How to set up an Enterprise VPN using tp-link products 08-02-202488859
Troubleshooting Instruction of TP-Link switch’s SFP port 07-23-2024110921
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024413142
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-2024108355
How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202498890
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022156831
How to Configure Port Mirror on TP-Link Smart Switches and L2 Managed Switches 06-29-2022104032
How to configure 802.1q VLAN on Smart Switches 06-29-2022167225
How to limit the port rate of the incoming traffic via ACL function 06-28-202275571
How to test the Jumbo Frame pass-through feature on TP-Link switches 06-28-2022215909
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022379686
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022370713
How to configure MAC ACL on Smart/Managed switch 06-28-2022106433
How to configure the DHCP Relay in TP-Link Switch 06-27-2022287259
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-2022110360
How to achieve AAA Authentication through TACACS + server on the switch 11-22-202183329
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018158865
How to configure Extended IP ACL 04-28-2012107410

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Hoe vind ik de hardware versie van een TP-Link product?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T1700G-28TQ(UN)_V3_190108

Download

Publicatiedatum: 2019-02-26

Taal: Engels

Bestandsgrootte: 14.50 MB

Modifications and Bug Fixes:
First firmware released.

Notes:
1. For T1700G-28TQ V3.0
2. If your device's Hardware Version is 2.0, after upgrading to this firmware, the old configuration will be lost.

Gebruik van Firmware van Derde Partijen in TP-Link Producten

Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.

Open Source Code voor Programmeerders (GPL)

Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.

U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.

De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.

GPL Code

T1700G-28TQ(UN)_V3_GPL

Emulators

Firmware versie	Working Mode	Taal
181024(UN)	-	Engels	Browsen

Note:

1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.

2. The listed emulators might not have the latest firmware.

3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.