Your browser does not support JavaScript. Please turn it on for the best experience.
T3700G-52TQ
詳しくは
T3700G-28TQ
T2600G-52TS
T2600G-28TS
T2600G-28MPS
T2600G-28SQ
新製品
T1700X-16TS
T1700G-28TQ
T1600G-28TS
T1600G-28PS
T1500G-10MPS
TL-SG2008P
TL-SG1016PE
TL-SG1016DE
TL-SG116E
TL-SG108E
TL-SG105E
TL-SG1218MPE
TL-SF1005D
TL-SG108
TL-SG1016D
TL-SX105
TL-SG1024D
TL-SG1048
TL-POE150S
人気
TL-POE10R
TL-SM311LS
OC300
OC200
EAP660 HD
EAP245
EAP225-Outdoor
EAP235-Wall
EAP225-Wall
TL-SG2428P
TL-SG2008
TL-SG2210MP
TL-SG2210P
Archer MR400
M7200
発売予定
CPE710
CPE510
TL-ER6120
TL-ER6020
TL-R600VPN
ER7206
TL-ER5120
TL-R480T+
TL-R470T+
OmadaクラウドSDN
Omadaはスイッチやゲートウェイを管理し、アクセスポイントをSDN（Software Defined Networking）へ統合するスマートプラットフォームです。100％集中型のクラウド管理を提供し、拡張性の高いネットワークを作成 — 1つの管理画面から全てを操作できます。
Omada WiFi 6 (802.11ax)
高密度環境下で安定したWiFiを展開されたい場合は、Omada WiFi 6テクノロジーを是非ご検討ください。 より多くのデバイスに、より早く・広い範囲を提供し、高密度環境でのパフォーマンスを大幅に向上させます。
Pharos 長距離無線
WiFiを長距離または遠隔地へ届けたい場合は、Pharosのワイヤレスソリューションがおすすめです。 PharosはTP-Linkの次世代アウトドア用シリーズで、WISP・エンタープライズブリッジ（P2P）・ワイヤレス監視（PtMP）等のアプリケーションに、長距離の屋外無線ネットワーキングソリューションを提供します。
MAXtream
屋外無線ブロードバンドを使用する際のバッファリングが心配な場合は、TP-Link MAXtreamテクノロジーを是非お試しください。 画期的なTDMA技術であるMAXtreamは、屋外APをよりスムーズにし、より効率的な通信を実現します。
MU-MIMO
複数デバイス接続時に発生する遅延にイライラしていませんか？そんな時は TP-Link MU-MIMOテクノロジーが活躍します！ MU-MIMOは、複数のユーザーへ同時に複数のデータストリームを提供することで、この問題を解決します。
PoE
監視カメラを展開する際、TP-Link PoEテクノロジーなら、1本のLANケーブルから電力とデータを送信できます。
LiteWaveアンマネージスイッチ
自宅で作業をしたり、有線接続を拡張したりされたい場合は、TP-Link LiteWaveスイッチをお試しください！ TP-Link LiteWaveアンマネージスイッチは、プラグ＆プレイで手軽に有線ネットワークを拡張可能です。
導入事例
導入事例はこちら
製品
戻る
テクノロジー
サポート
サポート一覧
設定ガイド
ダウンロードセンター
テクニカルサポート
FAQ
交換・保証について
TP-Linkエミュレータ
GPLコードセンター
機能フィルター: すべて トラブルシューティング
ファームウェアアップデートにより、過去のバージョンと比較しパフォーマンス向上や不具合等が修正される可能性がございます。
注意: アップグレードエラーを防ぐために、アップグレードして頂く前にご覧ください。
Modifications and Bug Fixes: 1. Optimize the performance to avoid memory allocation failure. 2. Fix the problem that the switch will broadcast the unicast the packets when multiple features are sending packets at the same time. 3. Fix the problem that TCP keep-alive packets cannot be sent out due to the probability of resource occupation during the firmware upgrading. 4. Enhance the stability of the POE/Speed button.
Notes: 1. For TL-SG3210XHP-M2(UN) 1.0 only 2. This firmware is only compatible with the Omada controller v4.1.5 or above. If you are using old Omada controller and plan to upgrade firmware for EAP, you must upgrade the Omada controller as well, and please follow Omada Controller Upgrade Guide to upgrade the Omada controller.
Modifications and Bug Fixes: 1. First firmware released for TL-SG3210XHP-M2(UN) 1.0. 2. Fully adapt to Omada SDN controller.
Notes: 1. For TL-SG3210XHP-M2(UN) 1.0 only 2. This firmware is only compatible with the Omada controller v4.1.5 or above. If you are using an old Omada controller and plan to upgrade firmware for EAP, you must upgrade the Omada controller as well, and please follow Omada Controller Upgrade Guide to upgrade the Omada controller.
いくつかのTP-LINKの公式ファームウェアはサードパーティーファームウェア（DD-WRT等）に置き換えることが出来ますが、TP-Linkは非公式ファームウェアのメンテナンスやサポートは致しません。またサードパーティー製のファームウェアのパフォーマンスや安定性の保証は致しません。 サードパーティー製のファームウェアを使用して製品に万が一不具合等が生じしてしまった場合、保証対象外になり、弊社はその責任を一切負わないものとします。
こちらは主にプログラマーの方への情報であり、大多数のTP-Linkホームユーザーには必要ございません。
一部のTP-LINKのソフトウェアコードはサードパーティーのコードを含みます。 GNU General Public Licence(“GPL“)のソフトウェアのタイトル、Version 1/Version 2/Version 3、またはGNU Lesser General Public License("LGPL")等("LGPL"). それぞれのGPLライセンス規約下において、各ソフトウェアをご利用できます。
GPL licence規約の印刷、閲覧、ダウンロードはこちらからできます。 ダイレクトダウンロードや情報詳細のために、TP-LINK製品で使用されているGPLソースコードを受理することになります、 ※TP-LINKソフトウェアGPLソフトウェアコード（GPLコードセンター下）を含む GPL Code Center.
この配布されたプログラムは保証がございません。 商業可能性の保証や特定目的への適合性は、言外に示されたものも 含め、全く存在しません。詳しくはGNU 一般公衆利用許諾書をご覧ください。 個々のGNUライセンスをご覧ください。
The EAP Controller is used to manage multiple EAPs intensively.
If you are planning to upgrade from the old controller(v3.2.14 or below) to this version, please read the: Omada Controller Upgrade Guide
Some new functions of the Controller require device firmware support, and the supporting firmware for routers and switches will be released soon.
Supported device models and firmware:
EAP:
EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above
EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above
EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above
EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above
EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above
EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above
EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above
EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above
EAP265 HD, EAP230-Wall, EAP235-Wall, EAP660 HD, EAP620 HD
Switch:
TL_SG3428MP, TL_SG3428, SG3428X, TL_SG3428XMP, TL-SG3452P, TL-SG3452,
TL-SG3210XHP-M2, TL-SG3210_V3, TL-SX3008F,
TL-SG2428P, TL-SL2428P_V4.2, TL-SG2210MP, TL-SG2210P_V3.20, TL-SG2218,
TL-SG2008P, TL-SG2008
Gateway:
ER605, ER7206
New Feature/Enhancement:
1. Add daylight saving time function.
2. Portal supports multiple entries. Local user accounts and voucher codes support binding to different portal entries.
3. Add daily/weekly/monthly limit in Voucher/Local User traffic limit function.
4. Add rate limit templates for SSID and Client rate limit modules.
5. Cancel the site administrator's authority for global configuration, such as controller general and maintenance settings.
For Router:
6. Add IPv6 function.
7. Add L2TP/PPTP interface in the static routing and policy routing function.
8. Add Firewall-State timeout at Settings-Network Security.
9. Add Router Table, Dynamic DNS, VPN Status, Port Forwarding Status in the Insight list.
10. Add ISP Load card and VPNs card in the Dashboard.
For Switch:
11. Add layer-3 function for L2+ switches.
12. Add ethertype value for switch ACL.
13. Add Switch Status in the Insight list.
14. Optimize the configuration logic for Switch STP and loopback detection function.
15. Add PoE utilization card in the Dashboard.
16. Add switch S/N information at Devices-Details-Overview
For EAP:
17. Add AI-Roaming function.
18. Add RADIUS DM function in portal RADIUS authentication.
19. Add dynamic VLAN feature in RADIUS profile.
20. Add OFDMA switch button for AX EAP.
Bug Fixed:
1. Fixed the bug that the local user can still access the Internet after re-authenticating, though it has reached the upper traffic limit.
2. Fixed the bug that the PoE scheduler may not take effect.
3. Fixed the bug that the Omada Controller frequently prints roaming logs in the log list.
4. Fixed the bug that the settings of PAP and CHAP authentication mode are inverse in the Controller.
5. Fixed the bug that we may not be able to configure or disable the portal authentication (with general error occurs) sometimes.
6. Fixed the bug that we can’t set VPN servers in different Controller sites in the meantime.
7. Fixed the bug that the SDN Controller does not support spaces character and Nordic script.
8. Fixed the bug that the Controller may not restore the backup file successfully if the backup file is too large (80MB or above).
Notes:
1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.
2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.
3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to an earlier version.
4. This version of the controller is applied to Omada APP of version 3.0.X or above.
5. Controller needs Java 8 and MongoDB 3.0-3.6 environment for running.
6. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian.
7. You may need to save the backup file and uninstall the old Omada Controller before installing this software.
6. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian.
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
6. Upgrade the MongoDB database version from 3.4.20 to 3.4.23.
7. Add IPv6 function.
8. Add L2TP/PPTP interface in the static routing and policy routing function.
9. Add Firewall-State timeout at Settings-Network Security.
10. Add Router Table, Dynamic DNS, VPN Status, Port Forwarding Status in the Insight list.
11. Add ISP Load card and VPNs card in the Dashboard.
12. Add layer-3 function for L2+ switches.
13. Add ethertype value for switch ACL.
14. Add Switch Status in the Insight list.
15. Optimize the configuration logic for Switch STP and loopback detection function.
16. Add PoE utilization card in the Dashboard.
17. Add switch S/N information at Devices-Details-Overview
18. Add AI-Roaming function.
19. Add RADIUS DM function in portal RADIUS authentication.
20. Add dynamic VLAN feature in RADIUS profile.
21. Add OFDMA switch button for AX EAP.
2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of the Omada Controller Upgrade Guide.
3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.14 or below.
4. This version of the controller is applied to the Omada APP of version 3.0.X or above.
EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1
TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1, TL-SG3452P_V1, TL-SG3452_V1, TL-SG3428MP_V1, TL-SG3210_V3, TL-SG2218_V1, TL-SL2428P_V4.2
TL-R605_V1, TL-ER7206_V1
1. Fixed the bug that the IPSec and L2TP over IPSec VPN cannot be set on the same WAN port at the same time.
2. Fixed the bug that the speedtest in the dashboard may display general error and internet Capacity and Gateway are still displayed as N/A.
3. Fixed the bug that we may not be able to re-adopt the Mesh AP if we failed to adopt it with the wrong password for the first time.
4. Fixed the bug that the wireless client will be displayed as a wired client (LAN) on the controller.
5. Fixed the bug that the controller's band steering range is inconsistent with the actual supported range of EAP, resulting in the configuration not taking effect.
6. Fixed the bug that the wired clients that have passed portal authentication may display 0 traffic data in the Authorized Clients list.
7. Fixed the bug that the wired clients that have passed portal authentication may have lower traffic statistics.
8. Fixed the bug that the Controller may show a general error if we forget an EAP and then delete an SSID.
9. Fixed the bug that the wired clients that have passed RADIUS portal authentication may have higher RADIUS accounting traffic statistics.
3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below.
5. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian.
6. You may need to save the backup file and uninstall the old Omada Controller before installing this software.
5. Controller needs Java 8 and MongoDB 3.0-3.6 for running. And there are no built-in JRE and MongoDB, so you need to install them by yourself.
TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1
1. Support to manage TL-SL2428P(UN) 4.20.
2. Optimize the protocol for the device reporting information of rate/duplex capability.
3. Optimize the password retrieval mechanism. If multiple local accounts are bound to one mailbox, you can choose which account to reset the password.
4. Add the batch cancelling of devices migration in the migration function.
5. Vulnerability optimization
1. Fixed the bug that the device will move to the upper left corner when you visit again if the device location is locked in the MAP.
2. Fixed the bug that uplink signal strength of Mesh EAP is not displayed accurately on the devices private configuration page.
3. Fixed the bug that the user without device permission may display that it still has permission in the account settings.
4. Fixed the bug that the function of Log Server/Alert Email may not take effect after restoring the backup file of Controller.
5. Fixed the bug that you may unsuccessfully import the local user account in the Hotspot Manager.
6. Fixed the bug that the “Last Seen” time in the private configuration page of the switch is the last uptime (not the last disconnected time) after the switch disconnects from Omada Controller.
7. Fixed the bug that the expiration time of Facebook authentication in “->authorized clients” is inconsistent with the actual expiration time.
8. Fixed the bug that the Controller may generate lots of roaming logs if clients leave from one EAP to another EAP implicitly since clients still send auth frame to the previous EAP.
Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1
Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1,TL-SL2428P(UN) 4.2
Gateway: TL-R605_V1, TL-ER7206_V1
New Feature/Enhancement: 1. Support to manage TL-SL2428P(UN) 4.20. 2. Optimize the protocol for the device reporting information of rate/duplex capability. 3. Optimize the password retrieval mechanism. If multiple local accounts are bound to one mailbox, you can choose which account to reset the password. 4. Add the batch cancelling of devices migration in the migration function. 5. Vulnerability optimization
Bug Fixed: 1. Fixed the bug that the device will move to the upper left corner when you visit again if the device location is locked in the MAP. 2. Fixed the bug that uplink signal strength of Mesh EAP is not displayed accurately on the devices private configuration page. 3. Fixed the bug that the user without device permission may display that it still has permission in the account settings. 4. Fixed the bug that the function of Log Server/Alert Email may not take effect after restoring the backup file of Controller. 5. Fixed the bug that you may unsuccessfully import the local user account in the Hotspot Manager. 6. Fixed the bug that the “Last Seen” time in the private configuration page of the switch is the last uptime (not the last disconnected time) after the switch disconnects from Omada Controller. 7. Fixed the bug that the expiration time of Facebook authentication in “hotspot->authorized clients” is inconsistent with the actual expiration time. 8. Fixed the bug that the Controller may generate lots of roaming logs if clients leave from one EAP to another EAP implicitly since clients still send auth frame to the previous EAP.
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide before upgrading the controller.
1. Support to import the SSL certificate of PFX format.
2. Support to create of up to 1000 sites.
3. Support arbitrary adjustment of logo display and closing logo.
4. Support to paste the IP address for everywhere there is IP setting.
5. Support to restore the site privilege setting for cloud users when backup and restore for the same controller.
6. Support to print all unused voucher codes.
7. Support to delete the archived alert log and event log.
8. Support to export device list, client list, etc. in Export Data function.
9. Support to drag and drop card adjust the dashboard display.
10. Add the Hostname/IP setting which will be used for the controller URL in the notification email.
11. Add Past Connection page in the Insight menu.
12. Improve the MAP topology display.
1. Fixed the bug that the Limited Online Users voucher code still can be used after expired.
2. Fixed the bug that cannot use the website subpath in The Promotional URL settings of portal function.
3. Fixed the bug that cannot import the picture in MAP and Portal settings if access controller with cloud access.
4. Fixed the bug that the cutout logo will show a black background.
5. Fixed the bug that auto backup and schedule function cannot work if the time zone uses summertime.
ニュース＆オファーTP-Linkはプライバシーを重要視しています。TP-Linkのプライバシーポリシーは TP-Link's Privacy Policyを御覧ください。
TP-Linkのニュースや製品アップグレード・プロモーション等、最新情報を入手する。
フォームに記入すると、あなたが弊社の プライバシーポリシーを理解・同意したこととみなされます。
登録
フォロー
From United States?
Check products and services for your region.