Λήψεις για VIGI NVR1004H-4P V1

Βίντεο Εγκατάστασης

• How to Setup Tapo Wireless Camera with VIGI NVR

  00:00 - Introduction 00:08 - Connection Diagram 00:13 - Setting up the Tapo camera ONVIF account 00:37 - Adding the Tapo camera in the VIGI NVR 02:36 - Fix Tapo camera IP address on router 03:00 - Controlling the Tapo camera from the NVR

  More Fold

Φίλτρο Χαρακτηριστικών: Όλα VIGI CameraVIGI OthersVIGI AppVIGI NVRVIGI Security Manager

Συχνές ερωτήσεις

• How Can I View 24-hour Recordings of VIGI Cameras? 08-22-20232411
• How to Share Your VIGI Devices with Your Families and Employees 08-22-20232422
• How to get started with the TP-Link VIGI app 08-14-202321555
• How to avoid IP address conflicts in a surveillance system 08-14-202336935
• How to choose a suitable HDD for VIGI NVR 07-04-202311195
• How to set up record and playback on the computer via VIGI Security Manager 06-28-202220553
• How to upgrade the firmware of VIGI NVR 06-27-202215291
• How to reset VIGI NVR to factory defaults 06-27-202224086
• How to change the password and Reset Password Email of the VIGI NVR 06-27-202222988
• What should I do if I forgot the password of VIGI NVR 07-17-202019956

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

• Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
• Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8);   Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
  How to find the hardware version on a TP-Link device
• Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
• To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
• It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
• Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

Εξομοιωτές