¿Qué debo hacer si el HS220 no puede atenuar la luz correctamente?
Nota: la bombilla inteligente TP-Link no puede funcionar con el HS220 , el LED regulable que puede funcionar con el HS220 debe ser el LED que puede atenuarse con el interruptor de hardware, la bombilla inteligente TP-Link solo puede ser controlada por la aplicación Kasa, que no puede atenuarse con el interruptor de hardware.
You may encounter some problems when trying to dim the light via the HS220. Here are some tips for your reference.
Case 1 You can turn on/off the light via the HS220, but cannot adjust the brightness of the light.
- Confirm if the light is a dimmable light that can be dimmed by the hardware switch. If it’s not, then it cannot be dimmed by the HS220.
- Check the dimmer type of the light. The HS220 only supports dimmable incandescent and LED lights based on TRIAC and forward-phase-control, while it doesn’t support lamps based on PWM(pulse width module) or ELV(electronic low voltage)dimming.
Case2 The HS220 can only dim one bulb properly. When there are more than one bulbs, there may be a flickering issue during the dimming process, or the bulbs can only be turned on/off but cannot be dimmed.
Este caso se debe principalmente a que la bombilla se basa en el método de atenuación PWM o ELV, que no es compatible con el HS220. Se sugiere contactar al soporte de la lámpara para confirmar el tipo de atenuación de la bombilla. Se sugiere contactar con el soporte de la lámpara para verificar el tipo de atenuación de la bombilla.
Nota: HS220 admite luces incandescentes y LED regulables basadas en control de fase directa (basado en TRIAC ) y no admite bombillas basadas en atenuación PWM (modulación de ancho de pulso) y ELV (baja tensión electrónica).
Caso 3 La luz sigue siendo muy brillante incluso cuando ha puesto un 1% de brillo o muy tenue incluso si ha puesto un 100% de brillo.
El atenuador inteligente KASA funciona bien con LED regulables y bombillas incandescentes. Sin embargo, todas las bombillas varían y algunas se apagan cuando se atenúan por debajo de niveles moderados. La calibración de atenuación le permite establecer el brillo más bajo posible para sus bombillas para garantizar que obtenga la mejor experiencia de atenuación posible. Se sugiere probar la función de calibración de atenuación. ¿Qué es la calibración de atenuación y cómo funciona? para calibrar el rango de atenuación y ver cómo va.
¿Es útil este artículo?
Tus comentarios nos ayudan a mejorar esta web.