How to configure TP-Link Router in Access Point mode(case2)

Configuration Guide
Actualizado06-27-2022 07:04:44 AM 1354021
Este artículo se aplica a: 

In this mode, your router connects to your existing router via an Ethernet cable and extends the wireless coverage of your existing network. Advanced functions like NAT, Parental Controls, and QoS are not supported in this mode.

Note: Old firmware may not support Access Point mode. If you don’t see this mode, please upgrade the firmware.

Here we take Archer C2300 for demonstration.

1. Connect the router’s Internet/WAN port to the existing network using an Ethernet cable.

2. Visit, and log in with your TP-Link ID or the password you set for the router.

3. Go to Advanced > Operation Mode, select Access Point and click Save. Log in to the router via after the router reboots.

4. Go to Quick Setup or Settings > Wireless > Wireless Settings and set the SSIDs and passwords for the wireless network. Click Next/Save to finish the setting.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

¿Es útil esta faq?

Sus comentarios nos ayudan a mejorar este sitio.

Productos recomendados

De United States?

Obtener productos, eventos y servicios para su región.