How to configure Router Mode of High Power Wireless N Router? (new logo)
This mode enables multiple users to share internet connection via ADSL/Cable Modem.
Here we take TL-WR941HP for demonstration.
1. Follow the steps below to connect your router. If your internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the router’s WAN port, and then follow Step 4 and 5 to complete the hardware connection.
1) Turn off the modem, and remove the backup battery if it has one.
2) Connect the modem to the WAN port on your router with an Ethernet cable.
3) Turn on the modem, and then wait about 2 minutes for it to restart.
4) Connect the power adapter to the router and turn on the router.
5) Verify that the hardware connection is correct by checking these LEDs.
Tips: If the Wi-Fi LED is off, press and hold the Wi-Fi On/Off button until it is on.
2. Log into the router. If you don’t know how to do that, please refer to
After successful login, follow the step-by-step instructions to complete the initial configuration.
2. Choose Region and Time Zone. Click Next.
3. Select Router. Click Next.
4. Select WAN Connection Type. If you are not sure, contact your ISP or click Auto Detect. Click Next.
5. Fill in the parameters accordingly. If you don’t know what to enter, contact your ISP. Click Next.
6. Either keep the default Wireless Network Name and Password or customize. Click Next.
7. Confirm your settings. Click Save.
Wait for the router to reboot.
8. Click Finish.
For wireless devices, you may have to reconnect to the wireless network if you have customized the SSID (network name) and password during the configuration.
Get to know more details of each function and configuration, please go to Download Center to download the manual of your product.
Is this faq useful?
Your feedback helps improve this site.