AC1200 Mesh Wi-Fi Range Extender
- Eliminate weak signal areas with whole home WiFi coverage.
- 2.4 GHz (300 Mbps) and 5 GHz (867 Mbps) dual-band WiFi connection ensures more stable wireless experience.†
- Creates a Mesh network by connecting to a TP-Link OneMesh™ router for seamless whole-home coverage.‡
- Adaptive Path Selection – connects to the fastest connection path to the router automatically and runs at top-speed.
- High Speed Mode – maximizes speed by using one WiFi band as dedicated backhaul, ideal for HD streaming and gaming.
- AP Mode – create a new Wi-Fi access point to enhance your wired network with Wi-Fi capability.
- Smart signal indicator helps to find the best location for optimal Wi-Fi coverage by showing the signal strength.
- Push the WPS button to easily connect to the router and you can uniformly manage from the Tether app or Web UI.
- Works with any Wi-Fi router or wireless access point.§
Expand Dual Band WiFi Everywhere
AC1200 Mesh WiFi Extender
Why get a Mesh WiFi Extender?
Can’t get WiFi in your bedroom, balcony, bathroom?
Lose connection while walking around the house?
Thick walls and floors weaken your WiFi signal?
Get tired of too many network cables?
Boost Whole Home WiFi with Your Existing Router
A single router has limited WiFi coverage and always causes WiFi dead zones. RE315 wirelessly connects to your existing router and expands its WiFi signal into areas it can’t reach on its own. Enjoy your stable network experience wherever you are at home.
Any WiFi Router
WiFi keeps Strongest for Unlimited Moving
With TP-Link Mesh Technology, it’s easy to form a Mesh network with a single WiFi name for seamless whole home coverage. Just connect RE315 to a OneMeshTM router. Always enjoy the strongest WiFi when you’re walking around with no need to search around for a stable connection.
Smart Roaming‡Uninterrupted streaming when moving around your home
One WiFi NameNo more switching WiFi network names
Easy CreationOneMesh™ Router + OneMesh™ Range Extender
Unified ManagementManage the whole unified network all in one Tether app
Traditional Router with Extender
OneMesh™ Router + Range Extender
Enjoy a Mesh Network with Your Existing Router
Want a Mesh network? Hesitate on whether to replace your existing router and buy a Mesh set?
TP-Link OneMesh™ resolves your dilemma.
Faster Dual Band WiFi up to 1200 Mbps
RE315 delivers dual band (2.4 GHz and 5 GHz) to transmit WiFi signals, doubling the performance of each band. It enables you to keep more devices connected at the same time with its 300 Mbps 2.4 GHz and 867 Mbps 5 GHz dual bands. Use the 2.4 GHz band to send email and browse the web and the 5 GHz band for gaming and HD streaming.†
Adaptive Path Selection: Keeps Itself Working at Top Speed
Adaptive Path Selection keeps your network running at optimal speeds by automatically choosing the fastest connection path to the router. Always keep your devices fast and stable—ideal for network environments crowded with many devices and applications.
High Speed Mode: Maximized Speed with Dedicated Backhaul
Uses one dedicated WiFi band as backhaul and another dedicated WiFi band as an access point to maximize the bandwidth on the extended WiFi.
Built-In Access Point Mode
RE315 is more than a wireless range extender. Simply plug an Ethernet cable into its Ethernet port and easily turn your wired internet connection into a 2×2 MIMO dual band wireless access point.
Secure One-Touch Connection for Easy Setup
Step 1: Simply press the WPS button on your router and, within 2 minutes, the WPS button on RE315 will connect to the network.
Step 2: Once connected, place RE315 at the best location—without reconfiguration.
Notes: Please connect the extender to the router via the Tether app or Web UI if your router doesn’t support WPS.
Find the Best Location with the Smart Signal Indicator
The smart signal indicator lets you see signal strength from the existing router at a glance. Easily to find the best place to position your range extender to extend your WiFi.
(Too far away from the router)
|Working Modes||Range Extender/Access Point|
|Ports||1 x 10/100Mbps Ethernet Port (RJ45)|
|Button||WPS Button, Reset Button|
|Power Consumption||9.5W（max power consumption）|
|Dimensions ( W x D x H )||3.5×1.4×4.9 in. (89×35.0×124.1 mm)|
|Antenna||2 External Antennas|
|Wireless Standards||IEEE 802.11a/n/ac 5 GHz, IEEE 802.11b/g/n 2.4 GHz|
|Frequency||2.4GHz and 5GHz|
|Signal Rate||300Mbps at 2.4GHz, 867Mbps at 5GHz|
|Reception Sensitivity||5 GHz:11a 6Mbps: -94dBm11a 54Mbps: -77dBm11ac HT20 MCS0: -94dBm11ac HT20 MCS8: -71dBm11ac HT40 MCS0: -92dBm11ac HT40 MCS9: -66dBm11ac HT80 MCS0: -87dBm11ac HT80 MCS9: -62dBm2.4 GHz:11g 54Mbps: -78dBm11n HT20 MCS7: -76dBm11n HT40 MCS7: -74dBm|
|Wireless Functions||Enable/Disable Wireless RadioDFS (the latest firmware and hardware version is required)Access ControlLED ControlPower ScheduleWi-Fi Coverage|
|Wireless Security||64/128-bit WEP, WPA/WPA-PSK2/WPA2-PSK2 encryptions|
|Transmission Power||2.4 GHz ≤20dBm, 5 GHz ≤30dBm|
|Package Contents||Wi-Fi Range Extender RE315Quick Installation Guide|
|System Requirements||Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, 8, 8.1, 10, MAC OS, NetWare, UNIX or Linux Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0, or other Java-enabled browser|
|Environment||Operating Temperature: 0℃~40℃ (32℉ ~104℉)Storage Temperature: -40℃~70℃ (-40℉ ~158℉)Operating Humidity: 10%~90% non-condensingStorage Humidity: 5%~90% non-condensing|
† Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection quality, and client condition.
‡ Smart Roaming is designed for devices that support the 802.11k/v standard.
§ The product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or is non-standard or outdated.